new file mode 100644
@@ -0,0 +1,1468 @@
+/*
+ * Header for the Direct Rendering Manager
+ *
+ * Author: Rickard E. (Rik) Faith <faith@valinux.com>
+ *
+ * Acknowledgments:
+ * Dec 1999, Richard Henderson <rth@twiddle.net>, move to generic cmpxchg.
+ */
+
+/*
+ * Copyright 1999 Precision Insight, Inc., Cedar Park, Texas.
+ * Copyright 2000 VA Linux Systems, Inc., Sunnyvale, California.
+ * All rights reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * VA LINUX SYSTEMS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef _DRM_H_
+#define _DRM_H_
+
+#if defined(__linux__)
+
+#include <linux/types.h>
+#include <asm/ioctl.h>
+typedef unsigned int drm_handle_t;
+
+#else /* One of the BSDs */
+
+#include <stdint.h>
+#include <sys/ioccom.h>
+#include <sys/types.h>
+typedef int8_t __s8;
+typedef uint8_t __u8;
+typedef int16_t __s16;
+typedef uint16_t __u16;
+typedef int32_t __s32;
+typedef uint32_t __u32;
+typedef int64_t __s64;
+typedef uint64_t __u64;
+typedef size_t __kernel_size_t;
+typedef unsigned long drm_handle_t;
+
+#endif
+
+#if defined(__cplusplus)
+extern "C" {
+#endif
+
+#define DRM_NAME "drm" /**< Name in kernel, /dev, and /proc */
+#define DRM_MIN_ORDER 5 /**< At least 2^5 bytes = 32 bytes */
+#define DRM_MAX_ORDER 22 /**< Up to 2^22 bytes = 4MB */
+#define DRM_RAM_PERCENT 10 /**< How much system ram can we lock? */
+
+#define _DRM_LOCK_HELD 0x80000000U /**< Hardware lock is held */
+#define _DRM_LOCK_CONT 0x40000000U /**< Hardware lock is contended */
+#define _DRM_LOCK_IS_HELD(lock) ((lock) & _DRM_LOCK_HELD)
+#define _DRM_LOCK_IS_CONT(lock) ((lock) & _DRM_LOCK_CONT)
+#define _DRM_LOCKING_CONTEXT(lock) ((lock) & ~(_DRM_LOCK_HELD|_DRM_LOCK_CONT))
+
+typedef unsigned int drm_context_t;
+typedef unsigned int drm_drawable_t;
+typedef unsigned int drm_magic_t;
+
+/*
+ * Cliprect.
+ *
+ * \warning: If you change this structure, make sure you change
+ * XF86DRIClipRectRec in the server as well
+ *
+ * \note KW: Actually it's illegal to change either for
+ * backwards-compatibility reasons.
+ */
+struct drm_clip_rect {
+ unsigned short x1;
+ unsigned short y1;
+ unsigned short x2;
+ unsigned short y2;
+};
+
+/*
+ * Drawable information.
+ */
+struct drm_drawable_info {
+ unsigned int num_rects;
+ struct drm_clip_rect *rects;
+};
+
+/*
+ * Texture region,
+ */
+struct drm_tex_region {
+ unsigned char next;
+ unsigned char prev;
+ unsigned char in_use;
+ unsigned char padding;
+ unsigned int age;
+};
+
+/*
+ * Hardware lock.
+ *
+ * The lock structure is a simple cache-line aligned integer. To avoid
+ * processor bus contention on a multiprocessor system, there should not be any
+ * other data stored in the same cache line.
+ */
+struct drm_hw_lock {
+ __volatile__ unsigned int lock; /**< lock variable */
+ char padding[60]; /**< Pad to cache line */
+};
+
+/*
+ * DRM_IOCTL_VERSION ioctl argument type.
+ *
+ * \sa drmGetVersion().
+ */
+struct drm_version {
+ int version_major; /**< Major version */
+ int version_minor; /**< Minor version */
+ int version_patchlevel; /**< Patch level */
+ __kernel_size_t name_len; /**< Length of name buffer */
+ char *name; /**< Name of driver */
+ __kernel_size_t date_len; /**< Length of date buffer */
+ char *date; /**< User-space buffer to hold date */
+ __kernel_size_t desc_len; /**< Length of desc buffer */
+ char *desc; /**< User-space buffer to hold desc */
+};
+
+/*
+ * DRM_IOCTL_GET_UNIQUE ioctl argument type.
+ *
+ * \sa drmGetBusid() and drmSetBusId().
+ */
+struct drm_unique {
+ __kernel_size_t unique_len; /**< Length of unique */
+ char *unique; /**< Unique name for driver instantiation */
+};
+
+struct drm_list {
+ int count; /**< Length of user-space structures */
+ struct drm_version *version;
+};
+
+struct drm_block {
+ int unused;
+};
+
+/*
+ * DRM_IOCTL_CONTROL ioctl argument type.
+ *
+ * \sa drmCtlInstHandler() and drmCtlUninstHandler().
+ */
+struct drm_control {
+ enum {
+ DRM_ADD_COMMAND,
+ DRM_RM_COMMAND,
+ DRM_INST_HANDLER,
+ DRM_UNINST_HANDLER
+ } func;
+ int irq;
+};
+
+/*
+ * Type of memory to map.
+ */
+enum drm_map_type {
+ _DRM_FRAME_BUFFER = 0, /**< WC (no caching), no core dump */
+ _DRM_REGISTERS = 1, /**< no caching, no core dump */
+ _DRM_SHM = 2, /**< shared, cached */
+ _DRM_AGP = 3, /**< AGP/GART */
+ _DRM_SCATTER_GATHER = 4, /**< Scatter/gather memory for PCI DMA */
+ _DRM_CONSISTENT = 5 /**< Consistent memory for PCI DMA */
+};
+
+/*
+ * Memory mapping flags.
+ */
+enum drm_map_flags {
+ _DRM_RESTRICTED = 0x01, /**< Cannot be mapped to user-virtual */
+ _DRM_READ_ONLY = 0x02,
+ _DRM_LOCKED = 0x04, /**< shared, cached, locked */
+ _DRM_KERNEL = 0x08, /**< kernel requires access */
+ _DRM_WRITE_COMBINING = 0x10, /**< use write-combining if available */
+ _DRM_CONTAINS_LOCK = 0x20, /**< SHM page that contains lock */
+ _DRM_REMOVABLE = 0x40, /**< Removable mapping */
+ _DRM_DRIVER = 0x80 /**< Managed by driver */
+};
+
+struct drm_ctx_priv_map {
+ unsigned int ctx_id; /**< Context requesting private mapping */
+ void *handle; /**< Handle of map */
+};
+
+/*
+ * DRM_IOCTL_GET_MAP, DRM_IOCTL_ADD_MAP and DRM_IOCTL_RM_MAP ioctls
+ * argument type.
+ *
+ * \sa drmAddMap().
+ */
+struct drm_map {
+ unsigned long offset; /**< Requested physical address (0 for SAREA)*/
+ unsigned long size; /**< Requested physical size (bytes) */
+ enum drm_map_type type; /**< Type of memory to map */
+ enum drm_map_flags flags; /**< Flags */
+ void *handle; /**< User-space: "Handle" to pass to mmap() */
+ /**< Kernel-space: kernel-virtual address */
+ int mtrr; /**< MTRR slot used */
+ /* Private data */
+};
+
+/*
+ * DRM_IOCTL_GET_CLIENT ioctl argument type.
+ */
+struct drm_client {
+ int idx; /**< Which client desired? */
+ int auth; /**< Is client authenticated? */
+ unsigned long pid; /**< Process ID */
+ unsigned long uid; /**< User ID */
+ unsigned long magic; /**< Magic */
+ unsigned long iocs; /**< Ioctl count */
+};
+
+enum drm_stat_type {
+ _DRM_STAT_LOCK,
+ _DRM_STAT_OPENS,
+ _DRM_STAT_CLOSES,
+ _DRM_STAT_IOCTLS,
+ _DRM_STAT_LOCKS,
+ _DRM_STAT_UNLOCKS,
+ _DRM_STAT_VALUE, /**< Generic value */
+ _DRM_STAT_BYTE, /**< Generic byte counter (1024bytes/K) */
+ _DRM_STAT_COUNT, /**< Generic non-byte counter (1000/k) */
+
+ _DRM_STAT_IRQ, /**< IRQ */
+ _DRM_STAT_PRIMARY, /**< Primary DMA bytes */
+ _DRM_STAT_SECONDARY, /**< Secondary DMA bytes */
+ _DRM_STAT_DMA, /**< DMA */
+ _DRM_STAT_SPECIAL, /**< Special DMA (e.g., priority or polled) */
+ _DRM_STAT_MISSED /**< Missed DMA opportunity */
+ /* Add to the *END* of the list */
+};
+
+/*
+ * DRM_IOCTL_GET_STATS ioctl argument type.
+ */
+struct drm_stats {
+ unsigned long count;
+ struct {
+ unsigned long value;
+ enum drm_stat_type type;
+ } data[15];
+};
+
+/*
+ * Hardware locking flags.
+ */
+enum drm_lock_flags {
+ _DRM_LOCK_READY = 0x01, /**< Wait until hardware is ready for DMA */
+ _DRM_LOCK_QUIESCENT = 0x02, /**< Wait until hardware quiescent */
+ _DRM_LOCK_FLUSH = 0x04, /**< Flush this context's DMA queue first */
+ _DRM_LOCK_FLUSH_ALL = 0x08, /**< Flush all DMA queues first */
+ /* These *HALT* flags aren't supported yet
+ -- they will be used to support the
+ full-screen DGA-like mode. */
+ _DRM_HALT_ALL_QUEUES = 0x10, /**< Halt all current and future queues */
+ _DRM_HALT_CUR_QUEUES = 0x20 /**< Halt all current queues */
+};
+
+/*
+ * DRM_IOCTL_LOCK, DRM_IOCTL_UNLOCK and DRM_IOCTL_FINISH ioctl argument type.
+ *
+ * \sa drmGetLock() and drmUnlock().
+ */
+struct drm_lock {
+ int context;
+ enum drm_lock_flags flags;
+};
+
+/*
+ * DMA flags
+ *
+ * \warning
+ * These values \e must match xf86drm.h.
+ *
+ * \sa drm_dma.
+ */
+enum drm_dma_flags {
+ /* Flags for DMA buffer dispatch */
+ _DRM_DMA_BLOCK = 0x01, /**<
+ * Block until buffer dispatched.
+ *
+ * \note The buffer may not yet have
+ * been processed by the hardware --
+ * getting a hardware lock with the
+ * hardware quiescent will ensure
+ * that the buffer has been
+ * processed.
+ */
+ _DRM_DMA_WHILE_LOCKED = 0x02, /**< Dispatch while lock held */
+ _DRM_DMA_PRIORITY = 0x04, /**< High priority dispatch */
+
+ /* Flags for DMA buffer request */
+ _DRM_DMA_WAIT = 0x10, /**< Wait for free buffers */
+ _DRM_DMA_SMALLER_OK = 0x20, /**< Smaller-than-requested buffers OK */
+ _DRM_DMA_LARGER_OK = 0x40 /**< Larger-than-requested buffers OK */
+};
+
+/*
+ * DRM_IOCTL_ADD_BUFS and DRM_IOCTL_MARK_BUFS ioctl argument type.
+ *
+ * \sa drmAddBufs().
+ */
+struct drm_buf_desc {
+ int count; /**< Number of buffers of this size */
+ int size; /**< Size in bytes */
+ int low_mark; /**< Low water mark */
+ int high_mark; /**< High water mark */
+ enum {
+ _DRM_PAGE_ALIGN = 0x01, /**< Align on page boundaries for DMA */
+ _DRM_AGP_BUFFER = 0x02, /**< Buffer is in AGP space */
+ _DRM_SG_BUFFER = 0x04, /**< Scatter/gather memory buffer */
+ _DRM_FB_BUFFER = 0x08, /**< Buffer is in frame buffer */
+ _DRM_PCI_BUFFER_RO = 0x10 /**< Map PCI DMA buffer read-only */
+ } flags;
+ unsigned long agp_start; /**<
+ * Start address of where the AGP buffers are
+ * in the AGP aperture
+ */
+};
+
+/*
+ * DRM_IOCTL_INFO_BUFS ioctl argument type.
+ */
+struct drm_buf_info {
+ int count; /**< Entries in list */
+ struct drm_buf_desc *list;
+};
+
+/*
+ * DRM_IOCTL_FREE_BUFS ioctl argument type.
+ */
+struct drm_buf_free {
+ int count;
+ int *list;
+};
+
+/*
+ * Buffer information
+ *
+ * \sa drm_buf_map.
+ */
+struct drm_buf_pub {
+ int idx; /**< Index into the master buffer list */
+ int total; /**< Buffer size */
+ int used; /**< Amount of buffer in use (for DMA) */
+ void *address; /**< Address of buffer */
+};
+
+/*
+ * DRM_IOCTL_MAP_BUFS ioctl argument type.
+ */
+struct drm_buf_map {
+ int count; /**< Length of the buffer list */
+#ifdef __cplusplus
+ void *virt;
+#else
+ void *virtual; /**< Mmap'd area in user-virtual */
+#endif
+ struct drm_buf_pub *list; /**< Buffer information */
+};
+
+/*
+ * DRM_IOCTL_DMA ioctl argument type.
+ *
+ * Indices here refer to the offset into the buffer list in drm_buf_get.
+ *
+ * \sa drmDMA().
+ */
+struct drm_dma {
+ int context; /**< Context handle */
+ int send_count; /**< Number of buffers to send */
+ int *send_indices; /**< List of handles to buffers */
+ int *send_sizes; /**< Lengths of data to send */
+ enum drm_dma_flags flags; /**< Flags */
+ int request_count; /**< Number of buffers requested */
+ int request_size; /**< Desired size for buffers */
+ int *request_indices; /**< Buffer information */
+ int *request_sizes;
+ int granted_count; /**< Number of buffers granted */
+};
+
+enum drm_ctx_flags {
+ _DRM_CONTEXT_PRESERVED = 0x01,
+ _DRM_CONTEXT_2DONLY = 0x02
+};
+
+/*
+ * DRM_IOCTL_ADD_CTX ioctl argument type.
+ *
+ * \sa drmCreateContext() and drmDestroyContext().
+ */
+struct drm_ctx {
+ drm_context_t handle;
+ enum drm_ctx_flags flags;
+};
+
+/*
+ * DRM_IOCTL_RES_CTX ioctl argument type.
+ */
+struct drm_ctx_res {
+ int count;
+ struct drm_ctx *contexts;
+};
+
+/*
+ * DRM_IOCTL_ADD_DRAW and DRM_IOCTL_RM_DRAW ioctl argument type.
+ */
+struct drm_draw {
+ drm_drawable_t handle;
+};
+
+/*
+ * DRM_IOCTL_UPDATE_DRAW ioctl argument type.
+ */
+typedef enum {
+ DRM_DRAWABLE_CLIPRECTS
+} drm_drawable_info_type_t;
+
+struct drm_update_draw {
+ drm_drawable_t handle;
+ unsigned int type;
+ unsigned int num;
+ unsigned long long data;
+};
+
+/*
+ * DRM_IOCTL_GET_MAGIC and DRM_IOCTL_AUTH_MAGIC ioctl argument type.
+ */
+struct drm_auth {
+ drm_magic_t magic;
+};
+
+/*
+ * DRM_IOCTL_IRQ_BUSID ioctl argument type.
+ *
+ * \sa drmGetInterruptFromBusID().
+ */
+struct drm_irq_busid {
+ int irq; /**< IRQ number */
+ int busnum; /**< bus number */
+ int devnum; /**< device number */
+ int funcnum; /**< function number */
+};
+
+enum drm_vblank_seq_type {
+ _DRM_VBLANK_ABSOLUTE = 0x0, /**< Wait for specific vblank sequence number */
+ _DRM_VBLANK_RELATIVE = 0x1, /**< Wait for given number of vblanks */
+ /* bits 1-6 are reserved for high crtcs */
+ _DRM_VBLANK_HIGH_CRTC_MASK = 0x0000003e,
+ _DRM_VBLANK_EVENT = 0x4000000, /**< Send event instead of blocking */
+ _DRM_VBLANK_FLIP = 0x8000000, /**< Scheduled buffer swap should flip */
+ _DRM_VBLANK_NEXTONMISS = 0x10000000, /**< If missed, wait for next vblank */
+ _DRM_VBLANK_SECONDARY = 0x20000000, /**< Secondary display controller */
+ _DRM_VBLANK_SIGNAL = 0x40000000 /**< Send signal instead of blocking, unsupported */
+};
+#define _DRM_VBLANK_HIGH_CRTC_SHIFT 1
+
+#define _DRM_VBLANK_TYPES_MASK (_DRM_VBLANK_ABSOLUTE | _DRM_VBLANK_RELATIVE)
+#define _DRM_VBLANK_FLAGS_MASK (_DRM_VBLANK_EVENT | _DRM_VBLANK_SIGNAL | \
+ _DRM_VBLANK_SECONDARY | _DRM_VBLANK_NEXTONMISS)
+
+struct drm_wait_vblank_request {
+ enum drm_vblank_seq_type type;
+ unsigned int sequence;
+ unsigned long signal;
+};
+
+struct drm_wait_vblank_reply {
+ enum drm_vblank_seq_type type;
+ unsigned int sequence;
+ long tval_sec;
+ long tval_usec;
+};
+
+/*
+ * DRM_IOCTL_WAIT_VBLANK ioctl argument type.
+ *
+ * \sa drmWaitVBlank().
+ */
+union drm_wait_vblank {
+ struct drm_wait_vblank_request request;
+ struct drm_wait_vblank_reply reply;
+};
+
+#define _DRM_PRE_MODESET 1
+#define _DRM_POST_MODESET 2
+
+/*
+ * DRM_IOCTL_MODESET_CTL ioctl argument type
+ *
+ * \sa drmModesetCtl().
+ */
+struct drm_modeset_ctl {
+ __u32 crtc;
+ __u32 cmd;
+};
+
+/*
+ * DRM_IOCTL_AGP_ENABLE ioctl argument type.
+ *
+ * \sa drmAgpEnable().
+ */
+struct drm_agp_mode {
+ unsigned long mode; /**< AGP mode */
+};
+
+/*
+ * DRM_IOCTL_AGP_ALLOC and DRM_IOCTL_AGP_FREE ioctls argument type.
+ *
+ * \sa drmAgpAlloc() and drmAgpFree().
+ */
+struct drm_agp_buffer {
+ unsigned long size; /**< In bytes -- will round to page boundary */
+ unsigned long handle; /**< Used for binding / unbinding */
+ unsigned long type; /**< Type of memory to allocate */
+ unsigned long physical; /**< Physical used by i810 */
+};
+
+/*
+ * DRM_IOCTL_AGP_BIND and DRM_IOCTL_AGP_UNBIND ioctls argument type.
+ *
+ * \sa drmAgpBind() and drmAgpUnbind().
+ */
+struct drm_agp_binding {
+ unsigned long handle; /**< From drm_agp_buffer */
+ unsigned long offset; /**< In bytes -- will round to page boundary */
+};
+
+/*
+ * DRM_IOCTL_AGP_INFO ioctl argument type.
+ *
+ * \sa drmAgpVersionMajor(), drmAgpVersionMinor(), drmAgpGetMode(),
+ * drmAgpBase(), drmAgpSize(), drmAgpMemoryUsed(), drmAgpMemoryAvail(),
+ * drmAgpVendorId() and drmAgpDeviceId().
+ */
+struct drm_agp_info {
+ int agp_version_major;
+ int agp_version_minor;
+ unsigned long mode;
+ unsigned long aperture_base; /* physical address */
+ unsigned long aperture_size; /* bytes */
+ unsigned long memory_allowed; /* bytes */
+ unsigned long memory_used;
+
+ /* PCI information */
+ unsigned short id_vendor;
+ unsigned short id_device;
+};
+
+/*
+ * DRM_IOCTL_SG_ALLOC ioctl argument type.
+ */
+struct drm_scatter_gather {
+ unsigned long size; /**< In bytes -- will round to page boundary */
+ unsigned long handle; /**< Used for mapping / unmapping */
+};
+
+/*
+ * DRM_IOCTL_SET_VERSION ioctl argument type.
+ */
+struct drm_set_version {
+ int drm_di_major;
+ int drm_di_minor;
+ int drm_dd_major;
+ int drm_dd_minor;
+};
+
+/**
+ * struct drm_gem_close - Argument for &DRM_IOCTL_GEM_CLOSE ioctl.
+ * @handle: Handle of the object to be closed.
+ * @pad: Padding.
+ *
+ * Releases the handle to an mm object.
+ */
+struct drm_gem_close {
+ __u32 handle;
+ __u32 pad;
+};
+
+/**
+ * struct drm_gem_flink - Argument for &DRM_IOCTL_GEM_FLINK ioctl.
+ * @handle: Handle for the object being named.
+ * @name: Returned global name.
+ *
+ * Create a global name for an object, returning the name.
+ *
+ * Note that the name does not hold a reference; when the object
+ * is freed, the name goes away.
+ */
+struct drm_gem_flink {
+ __u32 handle;
+ __u32 name;
+};
+
+/**
+ * struct drm_gem_open - Argument for &DRM_IOCTL_GEM_OPEN ioctl.
+ * @name: Name of object being opened.
+ * @handle: Returned handle for the object.
+ * @size: Returned size of the object
+ *
+ * Open an object using the global name, returning a handle and the size.
+ *
+ * This handle (of course) holds a reference to the object, so the object
+ * will not go away until the handle is deleted.
+ */
+struct drm_gem_open {
+ __u32 name;
+ __u32 handle;
+ __u64 size;
+};
+
+/**
+ * struct drm_gem_change_handle - Argument for &DRM_IOCTL_GEM_CHANGE_HANDLE ioctl.
+ * @handle: The handle of a gem object.
+ * @new_handle: An available gem handle.
+ *
+ * This ioctl changes the handle of a GEM object to the specified one.
+ * The new handle must be unused. On success the old handle is closed
+ * and all further IOCTL should refer to the new handle only.
+ * Calls to DRM_IOCTL_PRIME_FD_TO_HANDLE will return the new handle.
+ */
+struct drm_gem_change_handle {
+ __u32 handle;
+ __u32 new_handle;
+};
+
+/**
+ * DRM_CAP_DUMB_BUFFER
+ *
+ * If set to 1, the driver supports creating dumb buffers via the
+ * &DRM_IOCTL_MODE_CREATE_DUMB ioctl.
+ */
+#define DRM_CAP_DUMB_BUFFER 0x1
+/**
+ * DRM_CAP_VBLANK_HIGH_CRTC
+ *
+ * If set to 1, the kernel supports specifying a :ref:`CRTC index<crtc_index>`
+ * in the high bits of &drm_wait_vblank_request.type.
+ *
+ * Starting kernel version 2.6.39, this capability is always set to 1.
+ */
+#define DRM_CAP_VBLANK_HIGH_CRTC 0x2
+/**
+ * DRM_CAP_DUMB_PREFERRED_DEPTH
+ *
+ * The preferred bit depth for dumb buffers.
+ *
+ * The bit depth is the number of bits used to indicate the color of a single
+ * pixel excluding any padding. This is different from the number of bits per
+ * pixel. For instance, XRGB8888 has a bit depth of 24 but has 32 bits per
+ * pixel.
+ *
+ * Note that this preference only applies to dumb buffers, it's irrelevant for
+ * other types of buffers.
+ */
+#define DRM_CAP_DUMB_PREFERRED_DEPTH 0x3
+/**
+ * DRM_CAP_DUMB_PREFER_SHADOW
+ *
+ * If set to 1, the driver prefers userspace to render to a shadow buffer
+ * instead of directly rendering to a dumb buffer. For best speed, userspace
+ * should do streaming ordered memory copies into the dumb buffer and never
+ * read from it.
+ *
+ * Note that this preference only applies to dumb buffers, it's irrelevant for
+ * other types of buffers.
+ */
+#define DRM_CAP_DUMB_PREFER_SHADOW 0x4
+/**
+ * DRM_CAP_PRIME
+ *
+ * Bitfield of supported PRIME sharing capabilities. See &DRM_PRIME_CAP_IMPORT
+ * and &DRM_PRIME_CAP_EXPORT.
+ *
+ * Starting from kernel version 6.6, both &DRM_PRIME_CAP_IMPORT and
+ * &DRM_PRIME_CAP_EXPORT are always advertised.
+ *
+ * PRIME buffers are exposed as dma-buf file descriptors.
+ * See :ref:`prime_buffer_sharing`.
+ */
+#define DRM_CAP_PRIME 0x5
+/**
+ * DRM_PRIME_CAP_IMPORT
+ *
+ * If this bit is set in &DRM_CAP_PRIME, the driver supports importing PRIME
+ * buffers via the &DRM_IOCTL_PRIME_FD_TO_HANDLE ioctl.
+ *
+ * Starting from kernel version 6.6, this bit is always set in &DRM_CAP_PRIME.
+ */
+#define DRM_PRIME_CAP_IMPORT 0x1
+/**
+ * DRM_PRIME_CAP_EXPORT
+ *
+ * If this bit is set in &DRM_CAP_PRIME, the driver supports exporting PRIME
+ * buffers via the &DRM_IOCTL_PRIME_HANDLE_TO_FD ioctl.
+ *
+ * Starting from kernel version 6.6, this bit is always set in &DRM_CAP_PRIME.
+ */
+#define DRM_PRIME_CAP_EXPORT 0x2
+/**
+ * DRM_CAP_TIMESTAMP_MONOTONIC
+ *
+ * If set to 0, the kernel will report timestamps with ``CLOCK_REALTIME`` in
+ * struct drm_event_vblank. If set to 1, the kernel will report timestamps with
+ * ``CLOCK_MONOTONIC``. See ``clock_gettime(2)`` for the definition of these
+ * clocks.
+ *
+ * Starting from kernel version 2.6.39, the default value for this capability
+ * is 1. Starting kernel version 4.15, this capability is always set to 1.
+ */
+#define DRM_CAP_TIMESTAMP_MONOTONIC 0x6
+/**
+ * DRM_CAP_ASYNC_PAGE_FLIP
+ *
+ * If set to 1, the driver supports &DRM_MODE_PAGE_FLIP_ASYNC for legacy
+ * page-flips.
+ */
+#define DRM_CAP_ASYNC_PAGE_FLIP 0x7
+/**
+ * DRM_CAP_CURSOR_WIDTH
+ *
+ * The ``CURSOR_WIDTH`` and ``CURSOR_HEIGHT`` capabilities return a valid
+ * width x height combination for the hardware cursor. The intention is that a
+ * hardware agnostic userspace can query a cursor plane size to use.
+ *
+ * Note that the cross-driver contract is to merely return a valid size;
+ * drivers are free to attach another meaning on top, eg. i915 returns the
+ * maximum plane size.
+ */
+#define DRM_CAP_CURSOR_WIDTH 0x8
+/**
+ * DRM_CAP_CURSOR_HEIGHT
+ *
+ * See &DRM_CAP_CURSOR_WIDTH.
+ */
+#define DRM_CAP_CURSOR_HEIGHT 0x9
+/**
+ * DRM_CAP_ADDFB2_MODIFIERS
+ *
+ * If set to 1, the driver supports supplying modifiers in the
+ * &DRM_IOCTL_MODE_ADDFB2 ioctl.
+ */
+#define DRM_CAP_ADDFB2_MODIFIERS 0x10
+/**
+ * DRM_CAP_PAGE_FLIP_TARGET
+ *
+ * If set to 1, the driver supports the &DRM_MODE_PAGE_FLIP_TARGET_ABSOLUTE and
+ * &DRM_MODE_PAGE_FLIP_TARGET_RELATIVE flags in
+ * &drm_mode_crtc_page_flip_target.flags for the &DRM_IOCTL_MODE_PAGE_FLIP
+ * ioctl.
+ */
+#define DRM_CAP_PAGE_FLIP_TARGET 0x11
+/**
+ * DRM_CAP_CRTC_IN_VBLANK_EVENT
+ *
+ * If set to 1, the kernel supports reporting the CRTC ID in
+ * &drm_event_vblank.crtc_id for the &DRM_EVENT_VBLANK and
+ * &DRM_EVENT_FLIP_COMPLETE events.
+ *
+ * Starting kernel version 4.12, this capability is always set to 1.
+ */
+#define DRM_CAP_CRTC_IN_VBLANK_EVENT 0x12
+/**
+ * DRM_CAP_SYNCOBJ
+ *
+ * If set to 1, the driver supports sync objects. See :ref:`drm_sync_objects`.
+ */
+#define DRM_CAP_SYNCOBJ 0x13
+/**
+ * DRM_CAP_SYNCOBJ_TIMELINE
+ *
+ * If set to 1, the driver supports timeline operations on sync objects. See
+ * :ref:`drm_sync_objects`.
+ */
+#define DRM_CAP_SYNCOBJ_TIMELINE 0x14
+/**
+ * DRM_CAP_ATOMIC_ASYNC_PAGE_FLIP
+ *
+ * If set to 1, the driver supports &DRM_MODE_PAGE_FLIP_ASYNC for atomic
+ * commits.
+ */
+#define DRM_CAP_ATOMIC_ASYNC_PAGE_FLIP 0x15
+
+/* DRM_IOCTL_GET_CAP ioctl argument type */
+struct drm_get_cap {
+ __u64 capability;
+ __u64 value;
+};
+
+/**
+ * DRM_CLIENT_CAP_STEREO_3D
+ *
+ * If set to 1, the DRM core will expose the stereo 3D capabilities of the
+ * monitor by advertising the supported 3D layouts in the flags of struct
+ * drm_mode_modeinfo. See ``DRM_MODE_FLAG_3D_*``.
+ *
+ * This capability is always supported for all drivers starting from kernel
+ * version 3.13.
+ */
+#define DRM_CLIENT_CAP_STEREO_3D 1
+
+/**
+ * DRM_CLIENT_CAP_UNIVERSAL_PLANES
+ *
+ * If set to 1, the DRM core will expose all planes (overlay, primary, and
+ * cursor) to userspace.
+ *
+ * This capability has been introduced in kernel version 3.15. Starting from
+ * kernel version 3.17, this capability is always supported for all drivers.
+ */
+#define DRM_CLIENT_CAP_UNIVERSAL_PLANES 2
+
+/**
+ * DRM_CLIENT_CAP_ATOMIC
+ *
+ * If set to 1, the DRM core will expose atomic properties to userspace. This
+ * implicitly enables &DRM_CLIENT_CAP_UNIVERSAL_PLANES and
+ * &DRM_CLIENT_CAP_ASPECT_RATIO.
+ *
+ * If the driver doesn't support atomic mode-setting, enabling this capability
+ * will fail with -EOPNOTSUPP.
+ *
+ * This capability has been introduced in kernel version 4.0. Starting from
+ * kernel version 4.2, this capability is always supported for atomic-capable
+ * drivers.
+ */
+#define DRM_CLIENT_CAP_ATOMIC 3
+
+/**
+ * DRM_CLIENT_CAP_ASPECT_RATIO
+ *
+ * If set to 1, the DRM core will provide aspect ratio information in modes.
+ * See ``DRM_MODE_FLAG_PIC_AR_*``.
+ *
+ * This capability is always supported for all drivers starting from kernel
+ * version 4.18.
+ */
+#define DRM_CLIENT_CAP_ASPECT_RATIO 4
+
+/**
+ * DRM_CLIENT_CAP_WRITEBACK_CONNECTORS
+ *
+ * If set to 1, the DRM core will expose special connectors to be used for
+ * writing back to memory the scene setup in the commit. The client must enable
+ * &DRM_CLIENT_CAP_ATOMIC first.
+ *
+ * This capability is always supported for atomic-capable drivers starting from
+ * kernel version 4.19.
+ */
+#define DRM_CLIENT_CAP_WRITEBACK_CONNECTORS 5
+
+/**
+ * DRM_CLIENT_CAP_CURSOR_PLANE_HOTSPOT
+ *
+ * Drivers for para-virtualized hardware (e.g. vmwgfx, qxl, virtio and
+ * virtualbox) have additional restrictions for cursor planes (thus
+ * making cursor planes on those drivers not truly universal,) e.g.
+ * they need cursor planes to act like one would expect from a mouse
+ * cursor and have correctly set hotspot properties.
+ * If this client cap is not set the DRM core will hide cursor plane on
+ * those virtualized drivers because not setting it implies that the
+ * client is not capable of dealing with those extra restictions.
+ * Clients which do set cursor hotspot and treat the cursor plane
+ * like a mouse cursor should set this property.
+ * The client must enable &DRM_CLIENT_CAP_ATOMIC first.
+ *
+ * Setting this property on drivers which do not special case
+ * cursor planes (i.e. non-virtualized drivers) will return
+ * EOPNOTSUPP, which can be used by userspace to gauge
+ * requirements of the hardware/drivers they're running on.
+ *
+ * This capability is always supported for atomic-capable virtualized
+ * drivers starting from kernel version 6.6.
+ */
+#define DRM_CLIENT_CAP_CURSOR_PLANE_HOTSPOT 6
+
+/* DRM_IOCTL_SET_CLIENT_CAP ioctl argument type */
+struct drm_set_client_cap {
+ __u64 capability;
+ __u64 value;
+};
+
+#define DRM_RDWR O_RDWR
+#define DRM_CLOEXEC O_CLOEXEC
+struct drm_prime_handle {
+ __u32 handle;
+
+ /** Flags.. only applicable for handle->fd */
+ __u32 flags;
+
+ /** Returned dmabuf file descriptor */
+ __s32 fd;
+};
+
+struct drm_syncobj_create {
+ __u32 handle;
+#define DRM_SYNCOBJ_CREATE_SIGNALED (1 << 0)
+ __u32 flags;
+};
+
+struct drm_syncobj_destroy {
+ __u32 handle;
+ __u32 pad;
+};
+
+#define DRM_SYNCOBJ_FD_TO_HANDLE_FLAGS_IMPORT_SYNC_FILE (1 << 0)
+#define DRM_SYNCOBJ_FD_TO_HANDLE_FLAGS_TIMELINE (1 << 1)
+#define DRM_SYNCOBJ_HANDLE_TO_FD_FLAGS_EXPORT_SYNC_FILE (1 << 0)
+#define DRM_SYNCOBJ_HANDLE_TO_FD_FLAGS_TIMELINE (1 << 1)
+struct drm_syncobj_handle {
+ __u32 handle;
+ __u32 flags;
+
+ __s32 fd;
+ __u32 pad;
+
+ __u64 point;
+};
+
+struct drm_syncobj_transfer {
+ __u32 src_handle;
+ __u32 dst_handle;
+ __u64 src_point;
+ __u64 dst_point;
+ __u32 flags;
+ __u32 pad;
+};
+
+#define DRM_SYNCOBJ_WAIT_FLAGS_WAIT_ALL (1 << 0)
+#define DRM_SYNCOBJ_WAIT_FLAGS_WAIT_FOR_SUBMIT (1 << 1)
+#define DRM_SYNCOBJ_WAIT_FLAGS_WAIT_AVAILABLE (1 << 2) /* wait for time point to become available */
+#define DRM_SYNCOBJ_WAIT_FLAGS_WAIT_DEADLINE (1 << 3) /* set fence deadline to deadline_nsec */
+struct drm_syncobj_wait {
+ __u64 handles;
+ /* absolute timeout */
+ __s64 timeout_nsec;
+ __u32 count_handles;
+ __u32 flags;
+ __u32 first_signaled; /* only valid when not waiting all */
+ __u32 pad;
+ /**
+ * @deadline_nsec - fence deadline hint
+ *
+ * Deadline hint, in absolute CLOCK_MONOTONIC, to set on backing
+ * fence(s) if the DRM_SYNCOBJ_WAIT_FLAGS_WAIT_DEADLINE flag is
+ * set.
+ */
+ __u64 deadline_nsec;
+};
+
+struct drm_syncobj_timeline_wait {
+ __u64 handles;
+ /* wait on specific timeline point for every handles*/
+ __u64 points;
+ /* absolute timeout */
+ __s64 timeout_nsec;
+ __u32 count_handles;
+ __u32 flags;
+ __u32 first_signaled; /* only valid when not waiting all */
+ __u32 pad;
+ /**
+ * @deadline_nsec - fence deadline hint
+ *
+ * Deadline hint, in absolute CLOCK_MONOTONIC, to set on backing
+ * fence(s) if the DRM_SYNCOBJ_WAIT_FLAGS_WAIT_DEADLINE flag is
+ * set.
+ */
+ __u64 deadline_nsec;
+};
+
+/**
+ * struct drm_syncobj_eventfd
+ * @handle: syncobj handle.
+ * @flags: Zero to wait for the point to be signalled, or
+ * &DRM_SYNCOBJ_WAIT_FLAGS_WAIT_AVAILABLE to wait for a fence to be
+ * available for the point.
+ * @point: syncobj timeline point (set to zero for binary syncobjs).
+ * @fd: Existing eventfd to sent events to.
+ * @pad: Must be zero.
+ *
+ * Register an eventfd to be signalled by a syncobj. The eventfd counter will
+ * be incremented by one.
+ */
+struct drm_syncobj_eventfd {
+ __u32 handle;
+ __u32 flags;
+ __u64 point;
+ __s32 fd;
+ __u32 pad;
+};
+
+
+struct drm_syncobj_array {
+ __u64 handles;
+ __u32 count_handles;
+ __u32 pad;
+};
+
+#define DRM_SYNCOBJ_QUERY_FLAGS_LAST_SUBMITTED (1 << 0) /* last available point on timeline syncobj */
+struct drm_syncobj_timeline_array {
+ __u64 handles;
+ __u64 points;
+ __u32 count_handles;
+ __u32 flags;
+};
+
+
+/* Query current scanout sequence number */
+struct drm_crtc_get_sequence {
+ __u32 crtc_id; /* requested crtc_id */
+ __u32 active; /* return: crtc output is active */
+ __u64 sequence; /* return: most recent vblank sequence */
+ __s64 sequence_ns; /* return: most recent time of first pixel out */
+};
+
+/* Queue event to be delivered at specified sequence. Time stamp marks
+ * when the first pixel of the refresh cycle leaves the display engine
+ * for the display
+ */
+#define DRM_CRTC_SEQUENCE_RELATIVE 0x00000001 /* sequence is relative to current */
+#define DRM_CRTC_SEQUENCE_NEXT_ON_MISS 0x00000002 /* Use next sequence if we've missed */
+
+struct drm_crtc_queue_sequence {
+ __u32 crtc_id;
+ __u32 flags;
+ __u64 sequence; /* on input, target sequence. on output, actual sequence */
+ __u64 user_data; /* user data passed to event */
+};
+
+#define DRM_CLIENT_NAME_MAX_LEN 64
+struct drm_set_client_name {
+ __u64 name_len;
+ __u64 name;
+};
+
+
+#if defined(__cplusplus)
+}
+#endif
+
+#include "drm_mode.h"
+
+#if defined(__cplusplus)
+extern "C" {
+#endif
+
+#define DRM_IOCTL_BASE 'd'
+#define DRM_IO(nr) _IO(DRM_IOCTL_BASE,nr)
+#define DRM_IOR(nr,type) _IOR(DRM_IOCTL_BASE,nr,type)
+#define DRM_IOW(nr,type) _IOW(DRM_IOCTL_BASE,nr,type)
+#define DRM_IOWR(nr,type) _IOWR(DRM_IOCTL_BASE,nr,type)
+
+#define DRM_IOCTL_VERSION DRM_IOWR(0x00, struct drm_version)
+#define DRM_IOCTL_GET_UNIQUE DRM_IOWR(0x01, struct drm_unique)
+#define DRM_IOCTL_GET_MAGIC DRM_IOR( 0x02, struct drm_auth)
+#define DRM_IOCTL_IRQ_BUSID DRM_IOWR(0x03, struct drm_irq_busid)
+#define DRM_IOCTL_GET_MAP DRM_IOWR(0x04, struct drm_map)
+#define DRM_IOCTL_GET_CLIENT DRM_IOWR(0x05, struct drm_client)
+#define DRM_IOCTL_GET_STATS DRM_IOR( 0x06, struct drm_stats)
+#define DRM_IOCTL_SET_VERSION DRM_IOWR(0x07, struct drm_set_version)
+#define DRM_IOCTL_MODESET_CTL DRM_IOW(0x08, struct drm_modeset_ctl)
+/**
+ * DRM_IOCTL_GEM_CLOSE - Close a GEM handle.
+ *
+ * GEM handles are not reference-counted by the kernel. User-space is
+ * responsible for managing their lifetime. For example, if user-space imports
+ * the same memory object twice on the same DRM file description, the same GEM
+ * handle is returned by both imports, and user-space needs to ensure
+ * &DRM_IOCTL_GEM_CLOSE is performed once only. The same situation can happen
+ * when a memory object is allocated, then exported and imported again on the
+ * same DRM file description. The &DRM_IOCTL_MODE_GETFB2 IOCTL is an exception
+ * and always returns fresh new GEM handles even if an existing GEM handle
+ * already refers to the same memory object before the IOCTL is performed.
+ */
+#define DRM_IOCTL_GEM_CLOSE DRM_IOW (0x09, struct drm_gem_close)
+#define DRM_IOCTL_GEM_FLINK DRM_IOWR(0x0a, struct drm_gem_flink)
+#define DRM_IOCTL_GEM_OPEN DRM_IOWR(0x0b, struct drm_gem_open)
+#define DRM_IOCTL_GET_CAP DRM_IOWR(0x0c, struct drm_get_cap)
+#define DRM_IOCTL_SET_CLIENT_CAP DRM_IOW( 0x0d, struct drm_set_client_cap)
+
+#define DRM_IOCTL_SET_UNIQUE DRM_IOW( 0x10, struct drm_unique)
+#define DRM_IOCTL_AUTH_MAGIC DRM_IOW( 0x11, struct drm_auth)
+#define DRM_IOCTL_BLOCK DRM_IOWR(0x12, struct drm_block)
+#define DRM_IOCTL_UNBLOCK DRM_IOWR(0x13, struct drm_block)
+#define DRM_IOCTL_CONTROL DRM_IOW( 0x14, struct drm_control)
+#define DRM_IOCTL_ADD_MAP DRM_IOWR(0x15, struct drm_map)
+#define DRM_IOCTL_ADD_BUFS DRM_IOWR(0x16, struct drm_buf_desc)
+#define DRM_IOCTL_MARK_BUFS DRM_IOW( 0x17, struct drm_buf_desc)
+#define DRM_IOCTL_INFO_BUFS DRM_IOWR(0x18, struct drm_buf_info)
+#define DRM_IOCTL_MAP_BUFS DRM_IOWR(0x19, struct drm_buf_map)
+#define DRM_IOCTL_FREE_BUFS DRM_IOW( 0x1a, struct drm_buf_free)
+
+#define DRM_IOCTL_RM_MAP DRM_IOW( 0x1b, struct drm_map)
+
+#define DRM_IOCTL_SET_SAREA_CTX DRM_IOW( 0x1c, struct drm_ctx_priv_map)
+#define DRM_IOCTL_GET_SAREA_CTX DRM_IOWR(0x1d, struct drm_ctx_priv_map)
+
+#define DRM_IOCTL_SET_MASTER DRM_IO(0x1e)
+#define DRM_IOCTL_DROP_MASTER DRM_IO(0x1f)
+
+#define DRM_IOCTL_ADD_CTX DRM_IOWR(0x20, struct drm_ctx)
+#define DRM_IOCTL_RM_CTX DRM_IOWR(0x21, struct drm_ctx)
+#define DRM_IOCTL_MOD_CTX DRM_IOW( 0x22, struct drm_ctx)
+#define DRM_IOCTL_GET_CTX DRM_IOWR(0x23, struct drm_ctx)
+#define DRM_IOCTL_SWITCH_CTX DRM_IOW( 0x24, struct drm_ctx)
+#define DRM_IOCTL_NEW_CTX DRM_IOW( 0x25, struct drm_ctx)
+#define DRM_IOCTL_RES_CTX DRM_IOWR(0x26, struct drm_ctx_res)
+#define DRM_IOCTL_ADD_DRAW DRM_IOWR(0x27, struct drm_draw)
+#define DRM_IOCTL_RM_DRAW DRM_IOWR(0x28, struct drm_draw)
+#define DRM_IOCTL_DMA DRM_IOWR(0x29, struct drm_dma)
+#define DRM_IOCTL_LOCK DRM_IOW( 0x2a, struct drm_lock)
+#define DRM_IOCTL_UNLOCK DRM_IOW( 0x2b, struct drm_lock)
+#define DRM_IOCTL_FINISH DRM_IOW( 0x2c, struct drm_lock)
+
+/**
+ * DRM_IOCTL_PRIME_HANDLE_TO_FD - Convert a GEM handle to a DMA-BUF FD.
+ *
+ * User-space sets &drm_prime_handle.handle with the GEM handle to export and
+ * &drm_prime_handle.flags, and gets back a DMA-BUF file descriptor in
+ * &drm_prime_handle.fd.
+ *
+ * The export can fail for any driver-specific reason, e.g. because export is
+ * not supported for this specific GEM handle (but might be for others).
+ *
+ * Support for exporting DMA-BUFs is advertised via &DRM_PRIME_CAP_EXPORT.
+ */
+#define DRM_IOCTL_PRIME_HANDLE_TO_FD DRM_IOWR(0x2d, struct drm_prime_handle)
+/**
+ * DRM_IOCTL_PRIME_FD_TO_HANDLE - Convert a DMA-BUF FD to a GEM handle.
+ *
+ * User-space sets &drm_prime_handle.fd with a DMA-BUF file descriptor to
+ * import, and gets back a GEM handle in &drm_prime_handle.handle.
+ * &drm_prime_handle.flags is unused.
+ *
+ * If an existing GEM handle refers to the memory object backing the DMA-BUF,
+ * that GEM handle is returned. Therefore user-space which needs to handle
+ * arbitrary DMA-BUFs must have a user-space lookup data structure to manually
+ * reference-count duplicated GEM handles. For more information see
+ * &DRM_IOCTL_GEM_CLOSE.
+ *
+ * The import can fail for any driver-specific reason, e.g. because import is
+ * only supported for DMA-BUFs allocated on this DRM device.
+ *
+ * Support for importing DMA-BUFs is advertised via &DRM_PRIME_CAP_IMPORT.
+ */
+#define DRM_IOCTL_PRIME_FD_TO_HANDLE DRM_IOWR(0x2e, struct drm_prime_handle)
+
+#define DRM_IOCTL_AGP_ACQUIRE DRM_IO( 0x30)
+#define DRM_IOCTL_AGP_RELEASE DRM_IO( 0x31)
+#define DRM_IOCTL_AGP_ENABLE DRM_IOW( 0x32, struct drm_agp_mode)
+#define DRM_IOCTL_AGP_INFO DRM_IOR( 0x33, struct drm_agp_info)
+#define DRM_IOCTL_AGP_ALLOC DRM_IOWR(0x34, struct drm_agp_buffer)
+#define DRM_IOCTL_AGP_FREE DRM_IOW( 0x35, struct drm_agp_buffer)
+#define DRM_IOCTL_AGP_BIND DRM_IOW( 0x36, struct drm_agp_binding)
+#define DRM_IOCTL_AGP_UNBIND DRM_IOW( 0x37, struct drm_agp_binding)
+
+#define DRM_IOCTL_SG_ALLOC DRM_IOWR(0x38, struct drm_scatter_gather)
+#define DRM_IOCTL_SG_FREE DRM_IOW( 0x39, struct drm_scatter_gather)
+
+#define DRM_IOCTL_WAIT_VBLANK DRM_IOWR(0x3a, union drm_wait_vblank)
+
+#define DRM_IOCTL_CRTC_GET_SEQUENCE DRM_IOWR(0x3b, struct drm_crtc_get_sequence)
+#define DRM_IOCTL_CRTC_QUEUE_SEQUENCE DRM_IOWR(0x3c, struct drm_crtc_queue_sequence)
+
+#define DRM_IOCTL_UPDATE_DRAW DRM_IOW(0x3f, struct drm_update_draw)
+
+#define DRM_IOCTL_MODE_GETRESOURCES DRM_IOWR(0xA0, struct drm_mode_card_res)
+#define DRM_IOCTL_MODE_GETCRTC DRM_IOWR(0xA1, struct drm_mode_crtc)
+#define DRM_IOCTL_MODE_SETCRTC DRM_IOWR(0xA2, struct drm_mode_crtc)
+#define DRM_IOCTL_MODE_CURSOR DRM_IOWR(0xA3, struct drm_mode_cursor)
+#define DRM_IOCTL_MODE_GETGAMMA DRM_IOWR(0xA4, struct drm_mode_crtc_lut)
+#define DRM_IOCTL_MODE_SETGAMMA DRM_IOWR(0xA5, struct drm_mode_crtc_lut)
+#define DRM_IOCTL_MODE_GETENCODER DRM_IOWR(0xA6, struct drm_mode_get_encoder)
+#define DRM_IOCTL_MODE_GETCONNECTOR DRM_IOWR(0xA7, struct drm_mode_get_connector)
+#define DRM_IOCTL_MODE_ATTACHMODE DRM_IOWR(0xA8, struct drm_mode_mode_cmd) /* deprecated (never worked) */
+#define DRM_IOCTL_MODE_DETACHMODE DRM_IOWR(0xA9, struct drm_mode_mode_cmd) /* deprecated (never worked) */
+
+#define DRM_IOCTL_MODE_GETPROPERTY DRM_IOWR(0xAA, struct drm_mode_get_property)
+#define DRM_IOCTL_MODE_SETPROPERTY DRM_IOWR(0xAB, struct drm_mode_connector_set_property)
+#define DRM_IOCTL_MODE_GETPROPBLOB DRM_IOWR(0xAC, struct drm_mode_get_blob)
+#define DRM_IOCTL_MODE_GETFB DRM_IOWR(0xAD, struct drm_mode_fb_cmd)
+#define DRM_IOCTL_MODE_ADDFB DRM_IOWR(0xAE, struct drm_mode_fb_cmd)
+/**
+ * DRM_IOCTL_MODE_RMFB - Remove a framebuffer.
+ *
+ * This removes a framebuffer previously added via ADDFB/ADDFB2. The IOCTL
+ * argument is a framebuffer object ID.
+ *
+ * Warning: removing a framebuffer currently in-use on an enabled plane will
+ * disable that plane. The CRTC the plane is linked to may also be disabled
+ * (depending on driver capabilities).
+ */
+#define DRM_IOCTL_MODE_RMFB DRM_IOWR(0xAF, unsigned int)
+#define DRM_IOCTL_MODE_PAGE_FLIP DRM_IOWR(0xB0, struct drm_mode_crtc_page_flip)
+#define DRM_IOCTL_MODE_DIRTYFB DRM_IOWR(0xB1, struct drm_mode_fb_dirty_cmd)
+
+/**
+ * DRM_IOCTL_MODE_CREATE_DUMB - Create a new dumb buffer object.
+ *
+ * KMS dumb buffers provide a very primitive way to allocate a buffer object
+ * suitable for scanout and map it for software rendering. KMS dumb buffers are
+ * not suitable for hardware-accelerated rendering nor video decoding. KMS dumb
+ * buffers are not suitable to be displayed on any other device than the KMS
+ * device where they were allocated from. Also see
+ * :ref:`kms_dumb_buffer_objects`.
+ *
+ * The IOCTL argument is a struct drm_mode_create_dumb.
+ *
+ * User-space is expected to create a KMS dumb buffer via this IOCTL, then add
+ * it as a KMS framebuffer via &DRM_IOCTL_MODE_ADDFB and map it via
+ * &DRM_IOCTL_MODE_MAP_DUMB.
+ *
+ * &DRM_CAP_DUMB_BUFFER indicates whether this IOCTL is supported.
+ * &DRM_CAP_DUMB_PREFERRED_DEPTH and &DRM_CAP_DUMB_PREFER_SHADOW indicate
+ * driver preferences for dumb buffers.
+ */
+#define DRM_IOCTL_MODE_CREATE_DUMB DRM_IOWR(0xB2, struct drm_mode_create_dumb)
+#define DRM_IOCTL_MODE_MAP_DUMB DRM_IOWR(0xB3, struct drm_mode_map_dumb)
+#define DRM_IOCTL_MODE_DESTROY_DUMB DRM_IOWR(0xB4, struct drm_mode_destroy_dumb)
+#define DRM_IOCTL_MODE_GETPLANERESOURCES DRM_IOWR(0xB5, struct drm_mode_get_plane_res)
+#define DRM_IOCTL_MODE_GETPLANE DRM_IOWR(0xB6, struct drm_mode_get_plane)
+#define DRM_IOCTL_MODE_SETPLANE DRM_IOWR(0xB7, struct drm_mode_set_plane)
+#define DRM_IOCTL_MODE_ADDFB2 DRM_IOWR(0xB8, struct drm_mode_fb_cmd2)
+#define DRM_IOCTL_MODE_OBJ_GETPROPERTIES DRM_IOWR(0xB9, struct drm_mode_obj_get_properties)
+#define DRM_IOCTL_MODE_OBJ_SETPROPERTY DRM_IOWR(0xBA, struct drm_mode_obj_set_property)
+#define DRM_IOCTL_MODE_CURSOR2 DRM_IOWR(0xBB, struct drm_mode_cursor2)
+#define DRM_IOCTL_MODE_ATOMIC DRM_IOWR(0xBC, struct drm_mode_atomic)
+#define DRM_IOCTL_MODE_CREATEPROPBLOB DRM_IOWR(0xBD, struct drm_mode_create_blob)
+#define DRM_IOCTL_MODE_DESTROYPROPBLOB DRM_IOWR(0xBE, struct drm_mode_destroy_blob)
+
+#define DRM_IOCTL_SYNCOBJ_CREATE DRM_IOWR(0xBF, struct drm_syncobj_create)
+#define DRM_IOCTL_SYNCOBJ_DESTROY DRM_IOWR(0xC0, struct drm_syncobj_destroy)
+#define DRM_IOCTL_SYNCOBJ_HANDLE_TO_FD DRM_IOWR(0xC1, struct drm_syncobj_handle)
+#define DRM_IOCTL_SYNCOBJ_FD_TO_HANDLE DRM_IOWR(0xC2, struct drm_syncobj_handle)
+#define DRM_IOCTL_SYNCOBJ_WAIT DRM_IOWR(0xC3, struct drm_syncobj_wait)
+#define DRM_IOCTL_SYNCOBJ_RESET DRM_IOWR(0xC4, struct drm_syncobj_array)
+#define DRM_IOCTL_SYNCOBJ_SIGNAL DRM_IOWR(0xC5, struct drm_syncobj_array)
+
+#define DRM_IOCTL_MODE_CREATE_LEASE DRM_IOWR(0xC6, struct drm_mode_create_lease)
+#define DRM_IOCTL_MODE_LIST_LESSEES DRM_IOWR(0xC7, struct drm_mode_list_lessees)
+#define DRM_IOCTL_MODE_GET_LEASE DRM_IOWR(0xC8, struct drm_mode_get_lease)
+#define DRM_IOCTL_MODE_REVOKE_LEASE DRM_IOWR(0xC9, struct drm_mode_revoke_lease)
+
+#define DRM_IOCTL_SYNCOBJ_TIMELINE_WAIT DRM_IOWR(0xCA, struct drm_syncobj_timeline_wait)
+#define DRM_IOCTL_SYNCOBJ_QUERY DRM_IOWR(0xCB, struct drm_syncobj_timeline_array)
+#define DRM_IOCTL_SYNCOBJ_TRANSFER DRM_IOWR(0xCC, struct drm_syncobj_transfer)
+#define DRM_IOCTL_SYNCOBJ_TIMELINE_SIGNAL DRM_IOWR(0xCD, struct drm_syncobj_timeline_array)
+
+/**
+ * DRM_IOCTL_MODE_GETFB2 - Get framebuffer metadata.
+ *
+ * This queries metadata about a framebuffer. User-space fills
+ * &drm_mode_fb_cmd2.fb_id as the input, and the kernels fills the rest of the
+ * struct as the output.
+ *
+ * If the client is DRM master or has &CAP_SYS_ADMIN, &drm_mode_fb_cmd2.handles
+ * will be filled with GEM buffer handles. Fresh new GEM handles are always
+ * returned, even if another GEM handle referring to the same memory object
+ * already exists on the DRM file description. The caller is responsible for
+ * removing the new handles, e.g. via the &DRM_IOCTL_GEM_CLOSE IOCTL. The same
+ * new handle will be returned for multiple planes in case they use the same
+ * memory object. Planes are valid until one has a zero handle -- this can be
+ * used to compute the number of planes.
+ *
+ * Otherwise, &drm_mode_fb_cmd2.handles will be zeroed and planes are valid
+ * until one has a zero &drm_mode_fb_cmd2.pitches.
+ *
+ * If the framebuffer has a format modifier, &DRM_MODE_FB_MODIFIERS will be set
+ * in &drm_mode_fb_cmd2.flags and &drm_mode_fb_cmd2.modifier will contain the
+ * modifier. Otherwise, user-space must ignore &drm_mode_fb_cmd2.modifier.
+ *
+ * To obtain DMA-BUF FDs for each plane without leaking GEM handles, user-space
+ * can export each handle via &DRM_IOCTL_PRIME_HANDLE_TO_FD, then immediately
+ * close each unique handle via &DRM_IOCTL_GEM_CLOSE, making sure to not
+ * double-close handles which are specified multiple times in the array.
+ */
+#define DRM_IOCTL_MODE_GETFB2 DRM_IOWR(0xCE, struct drm_mode_fb_cmd2)
+
+#define DRM_IOCTL_SYNCOBJ_EVENTFD DRM_IOWR(0xCF, struct drm_syncobj_eventfd)
+
+/**
+ * DRM_IOCTL_MODE_CLOSEFB - Close a framebuffer.
+ *
+ * This closes a framebuffer previously added via ADDFB/ADDFB2. The IOCTL
+ * argument is a framebuffer object ID.
+ *
+ * This IOCTL is similar to &DRM_IOCTL_MODE_RMFB, except it doesn't disable
+ * planes and CRTCs. As long as the framebuffer is used by a plane, it's kept
+ * alive. When the plane no longer uses the framebuffer (because the
+ * framebuffer is replaced with another one, or the plane is disabled), the
+ * framebuffer is cleaned up.
+ *
+ * This is useful to implement flicker-free transitions between two processes.
+ *
+ * Depending on the threat model, user-space may want to ensure that the
+ * framebuffer doesn't expose any sensitive user information: closed
+ * framebuffers attached to a plane can be read back by the next DRM master.
+ */
+#define DRM_IOCTL_MODE_CLOSEFB DRM_IOWR(0xD0, struct drm_mode_closefb)
+
+/**
+ * DRM_IOCTL_SET_CLIENT_NAME - Attach a name to a drm_file
+ *
+ * Having a name allows for easier tracking and debugging.
+ * The length of the name (without null ending char) must be
+ * <= DRM_CLIENT_NAME_MAX_LEN.
+ * The call will fail if the name contains whitespaces or non-printable chars.
+ */
+#define DRM_IOCTL_SET_CLIENT_NAME DRM_IOWR(0xD1, struct drm_set_client_name)
+
+/**
+ * DRM_IOCTL_GEM_CHANGE_HANDLE - Move an object to a different handle
+ *
+ * Some applications (notably CRIU) need objects to have specific gem handles.
+ * This ioctl changes the object at one gem handle to use a new gem handle.
+ */
+#define DRM_IOCTL_GEM_CHANGE_HANDLE DRM_IOWR(0xD2, struct drm_gem_change_handle)
+
+/*
+ * Device specific ioctls should only be in their respective headers
+ * The device specific ioctl range is from 0x40 to 0x9f.
+ * Generic IOCTLS restart at 0xA0.
+ *
+ * \sa drmCommandNone(), drmCommandRead(), drmCommandWrite(), and
+ * drmCommandReadWrite().
+ */
+#define DRM_COMMAND_BASE 0x40
+#define DRM_COMMAND_END 0xA0
+
+/**
+ * struct drm_event - Header for DRM events
+ * @type: event type.
+ * @length: total number of payload bytes (including header).
+ *
+ * This struct is a header for events written back to user-space on the DRM FD.
+ * A read on the DRM FD will always only return complete events: e.g. if the
+ * read buffer is 100 bytes large and there are two 64 byte events pending,
+ * only one will be returned.
+ *
+ * Event types 0 - 0x7fffffff are generic DRM events, 0x80000000 and
+ * up are chipset specific. Generic DRM events include &DRM_EVENT_VBLANK,
+ * &DRM_EVENT_FLIP_COMPLETE and &DRM_EVENT_CRTC_SEQUENCE.
+ */
+struct drm_event {
+ __u32 type;
+ __u32 length;
+};
+
+/**
+ * DRM_EVENT_VBLANK - vertical blanking event
+ *
+ * This event is sent in response to &DRM_IOCTL_WAIT_VBLANK with the
+ * &_DRM_VBLANK_EVENT flag set.
+ *
+ * The event payload is a struct drm_event_vblank.
+ */
+#define DRM_EVENT_VBLANK 0x01
+/**
+ * DRM_EVENT_FLIP_COMPLETE - page-flip completion event
+ *
+ * This event is sent in response to an atomic commit or legacy page-flip with
+ * the &DRM_MODE_PAGE_FLIP_EVENT flag set.
+ *
+ * The event payload is a struct drm_event_vblank.
+ */
+#define DRM_EVENT_FLIP_COMPLETE 0x02
+/**
+ * DRM_EVENT_CRTC_SEQUENCE - CRTC sequence event
+ *
+ * This event is sent in response to &DRM_IOCTL_CRTC_QUEUE_SEQUENCE.
+ *
+ * The event payload is a struct drm_event_crtc_sequence.
+ */
+#define DRM_EVENT_CRTC_SEQUENCE 0x03
+
+struct drm_event_vblank {
+ struct drm_event base;
+ __u64 user_data;
+ __u32 tv_sec;
+ __u32 tv_usec;
+ __u32 sequence;
+ __u32 crtc_id; /* 0 on older kernels that do not support this */
+};
+
+/* Event delivered at sequence. Time stamp marks when the first pixel
+ * of the refresh cycle leaves the display engine for the display
+ */
+struct drm_event_crtc_sequence {
+ struct drm_event base;
+ __u64 user_data;
+ __s64 time_ns;
+ __u64 sequence;
+};
+
+/* typedef area */
+typedef struct drm_clip_rect drm_clip_rect_t;
+typedef struct drm_drawable_info drm_drawable_info_t;
+typedef struct drm_tex_region drm_tex_region_t;
+typedef struct drm_hw_lock drm_hw_lock_t;
+typedef struct drm_version drm_version_t;
+typedef struct drm_unique drm_unique_t;
+typedef struct drm_list drm_list_t;
+typedef struct drm_block drm_block_t;
+typedef struct drm_control drm_control_t;
+typedef enum drm_map_type drm_map_type_t;
+typedef enum drm_map_flags drm_map_flags_t;
+typedef struct drm_ctx_priv_map drm_ctx_priv_map_t;
+typedef struct drm_map drm_map_t;
+typedef struct drm_client drm_client_t;
+typedef enum drm_stat_type drm_stat_type_t;
+typedef struct drm_stats drm_stats_t;
+typedef enum drm_lock_flags drm_lock_flags_t;
+typedef struct drm_lock drm_lock_t;
+typedef enum drm_dma_flags drm_dma_flags_t;
+typedef struct drm_buf_desc drm_buf_desc_t;
+typedef struct drm_buf_info drm_buf_info_t;
+typedef struct drm_buf_free drm_buf_free_t;
+typedef struct drm_buf_pub drm_buf_pub_t;
+typedef struct drm_buf_map drm_buf_map_t;
+typedef struct drm_dma drm_dma_t;
+typedef union drm_wait_vblank drm_wait_vblank_t;
+typedef struct drm_agp_mode drm_agp_mode_t;
+typedef enum drm_ctx_flags drm_ctx_flags_t;
+typedef struct drm_ctx drm_ctx_t;
+typedef struct drm_ctx_res drm_ctx_res_t;
+typedef struct drm_draw drm_draw_t;
+typedef struct drm_update_draw drm_update_draw_t;
+typedef struct drm_auth drm_auth_t;
+typedef struct drm_irq_busid drm_irq_busid_t;
+typedef enum drm_vblank_seq_type drm_vblank_seq_type_t;
+
+typedef struct drm_agp_buffer drm_agp_buffer_t;
+typedef struct drm_agp_binding drm_agp_binding_t;
+typedef struct drm_agp_info drm_agp_info_t;
+typedef struct drm_scatter_gather drm_scatter_gather_t;
+typedef struct drm_set_version drm_set_version_t;
+
+#if defined(__cplusplus)
+}
+#endif
+
+#endif
new file mode 100644
@@ -0,0 +1,1370 @@
+/*
+ * Copyright (c) 2007 Dave Airlie <airlied@linux.ie>
+ * Copyright (c) 2007 Jakob Bornecrantz <wallbraker@gmail.com>
+ * Copyright (c) 2008 Red Hat Inc.
+ * Copyright (c) 2007-2008 Tungsten Graphics, Inc., Cedar Park, TX., USA
+ * Copyright (c) 2007-2008 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ */
+
+#ifndef _DRM_MODE_H
+#define _DRM_MODE_H
+
+#include "drm.h"
+
+#if defined(__cplusplus)
+extern "C" {
+#endif
+
+/**
+ * DOC: overview
+ *
+ * DRM exposes many UAPI and structure definitions to have a consistent
+ * and standardized interface with users.
+ * Userspace can refer to these structure definitions and UAPI formats
+ * to communicate to drivers.
+ */
+
+#define DRM_CONNECTOR_NAME_LEN 32
+#define DRM_DISPLAY_MODE_LEN 32
+#define DRM_PROP_NAME_LEN 32
+
+#define DRM_MODE_TYPE_BUILTIN (1<<0) /* deprecated */
+#define DRM_MODE_TYPE_CLOCK_C ((1<<1) | DRM_MODE_TYPE_BUILTIN) /* deprecated */
+#define DRM_MODE_TYPE_CRTC_C ((1<<2) | DRM_MODE_TYPE_BUILTIN) /* deprecated */
+#define DRM_MODE_TYPE_PREFERRED (1<<3)
+#define DRM_MODE_TYPE_DEFAULT (1<<4) /* deprecated */
+#define DRM_MODE_TYPE_USERDEF (1<<5)
+#define DRM_MODE_TYPE_DRIVER (1<<6)
+
+#define DRM_MODE_TYPE_ALL (DRM_MODE_TYPE_PREFERRED | \
+ DRM_MODE_TYPE_USERDEF | \
+ DRM_MODE_TYPE_DRIVER)
+
+/* Video mode flags */
+/* bit compatible with the xrandr RR_ definitions (bits 0-13)
+ *
+ * ABI warning: Existing userspace really expects
+ * the mode flags to match the xrandr definitions. Any
+ * changes that don't match the xrandr definitions will
+ * likely need a new client cap or some other mechanism
+ * to avoid breaking existing userspace. This includes
+ * allocating new flags in the previously unused bits!
+ */
+#define DRM_MODE_FLAG_PHSYNC (1<<0)
+#define DRM_MODE_FLAG_NHSYNC (1<<1)
+#define DRM_MODE_FLAG_PVSYNC (1<<2)
+#define DRM_MODE_FLAG_NVSYNC (1<<3)
+#define DRM_MODE_FLAG_INTERLACE (1<<4)
+#define DRM_MODE_FLAG_DBLSCAN (1<<5)
+#define DRM_MODE_FLAG_CSYNC (1<<6)
+#define DRM_MODE_FLAG_PCSYNC (1<<7)
+#define DRM_MODE_FLAG_NCSYNC (1<<8)
+#define DRM_MODE_FLAG_HSKEW (1<<9) /* hskew provided */
+#define DRM_MODE_FLAG_BCAST (1<<10) /* deprecated */
+#define DRM_MODE_FLAG_PIXMUX (1<<11) /* deprecated */
+#define DRM_MODE_FLAG_DBLCLK (1<<12)
+#define DRM_MODE_FLAG_CLKDIV2 (1<<13)
+ /*
+ * When adding a new stereo mode don't forget to adjust DRM_MODE_FLAGS_3D_MAX
+ * (define not exposed to user space).
+ */
+#define DRM_MODE_FLAG_3D_MASK (0x1f<<14)
+#define DRM_MODE_FLAG_3D_NONE (0<<14)
+#define DRM_MODE_FLAG_3D_FRAME_PACKING (1<<14)
+#define DRM_MODE_FLAG_3D_FIELD_ALTERNATIVE (2<<14)
+#define DRM_MODE_FLAG_3D_LINE_ALTERNATIVE (3<<14)
+#define DRM_MODE_FLAG_3D_SIDE_BY_SIDE_FULL (4<<14)
+#define DRM_MODE_FLAG_3D_L_DEPTH (5<<14)
+#define DRM_MODE_FLAG_3D_L_DEPTH_GFX_GFX_DEPTH (6<<14)
+#define DRM_MODE_FLAG_3D_TOP_AND_BOTTOM (7<<14)
+#define DRM_MODE_FLAG_3D_SIDE_BY_SIDE_HALF (8<<14)
+
+/* Picture aspect ratio options */
+#define DRM_MODE_PICTURE_ASPECT_NONE 0
+#define DRM_MODE_PICTURE_ASPECT_4_3 1
+#define DRM_MODE_PICTURE_ASPECT_16_9 2
+#define DRM_MODE_PICTURE_ASPECT_64_27 3
+#define DRM_MODE_PICTURE_ASPECT_256_135 4
+
+/* Content type options */
+#define DRM_MODE_CONTENT_TYPE_NO_DATA 0
+#define DRM_MODE_CONTENT_TYPE_GRAPHICS 1
+#define DRM_MODE_CONTENT_TYPE_PHOTO 2
+#define DRM_MODE_CONTENT_TYPE_CINEMA 3
+#define DRM_MODE_CONTENT_TYPE_GAME 4
+
+/* Aspect ratio flag bitmask (4 bits 22:19) */
+#define DRM_MODE_FLAG_PIC_AR_MASK (0x0F<<19)
+#define DRM_MODE_FLAG_PIC_AR_NONE \
+ (DRM_MODE_PICTURE_ASPECT_NONE<<19)
+#define DRM_MODE_FLAG_PIC_AR_4_3 \
+ (DRM_MODE_PICTURE_ASPECT_4_3<<19)
+#define DRM_MODE_FLAG_PIC_AR_16_9 \
+ (DRM_MODE_PICTURE_ASPECT_16_9<<19)
+#define DRM_MODE_FLAG_PIC_AR_64_27 \
+ (DRM_MODE_PICTURE_ASPECT_64_27<<19)
+#define DRM_MODE_FLAG_PIC_AR_256_135 \
+ (DRM_MODE_PICTURE_ASPECT_256_135<<19)
+
+#define DRM_MODE_FLAG_ALL (DRM_MODE_FLAG_PHSYNC | \
+ DRM_MODE_FLAG_NHSYNC | \
+ DRM_MODE_FLAG_PVSYNC | \
+ DRM_MODE_FLAG_NVSYNC | \
+ DRM_MODE_FLAG_INTERLACE | \
+ DRM_MODE_FLAG_DBLSCAN | \
+ DRM_MODE_FLAG_CSYNC | \
+ DRM_MODE_FLAG_PCSYNC | \
+ DRM_MODE_FLAG_NCSYNC | \
+ DRM_MODE_FLAG_HSKEW | \
+ DRM_MODE_FLAG_DBLCLK | \
+ DRM_MODE_FLAG_CLKDIV2 | \
+ DRM_MODE_FLAG_3D_MASK)
+
+/* DPMS flags */
+/* bit compatible with the xorg definitions. */
+#define DRM_MODE_DPMS_ON 0
+#define DRM_MODE_DPMS_STANDBY 1
+#define DRM_MODE_DPMS_SUSPEND 2
+#define DRM_MODE_DPMS_OFF 3
+
+/* Scaling mode options */
+#define DRM_MODE_SCALE_NONE 0 /* Unmodified timing (display or
+ software can still scale) */
+#define DRM_MODE_SCALE_FULLSCREEN 1 /* Full screen, ignore aspect */
+#define DRM_MODE_SCALE_CENTER 2 /* Centered, no scaling */
+#define DRM_MODE_SCALE_ASPECT 3 /* Full screen, preserve aspect */
+
+/* Dithering mode options */
+#define DRM_MODE_DITHERING_OFF 0
+#define DRM_MODE_DITHERING_ON 1
+#define DRM_MODE_DITHERING_AUTO 2
+
+/* Dirty info options */
+#define DRM_MODE_DIRTY_OFF 0
+#define DRM_MODE_DIRTY_ON 1
+#define DRM_MODE_DIRTY_ANNOTATE 2
+
+/* Link Status options */
+#define DRM_MODE_LINK_STATUS_GOOD 0
+#define DRM_MODE_LINK_STATUS_BAD 1
+
+/*
+ * DRM_MODE_ROTATE_<degrees>
+ *
+ * Signals that a drm plane is been rotated <degrees> degrees in counter
+ * clockwise direction.
+ *
+ * This define is provided as a convenience, looking up the property id
+ * using the name->prop id lookup is the preferred method.
+ */
+#define DRM_MODE_ROTATE_0 (1<<0)
+#define DRM_MODE_ROTATE_90 (1<<1)
+#define DRM_MODE_ROTATE_180 (1<<2)
+#define DRM_MODE_ROTATE_270 (1<<3)
+
+/*
+ * DRM_MODE_ROTATE_MASK
+ *
+ * Bitmask used to look for drm plane rotations.
+ */
+#define DRM_MODE_ROTATE_MASK (\
+ DRM_MODE_ROTATE_0 | \
+ DRM_MODE_ROTATE_90 | \
+ DRM_MODE_ROTATE_180 | \
+ DRM_MODE_ROTATE_270)
+
+/*
+ * DRM_MODE_REFLECT_<axis>
+ *
+ * Signals that the contents of a drm plane is reflected along the <axis> axis,
+ * in the same way as mirroring.
+ * See kerneldoc chapter "Plane Composition Properties" for more details.
+ *
+ * This define is provided as a convenience, looking up the property id
+ * using the name->prop id lookup is the preferred method.
+ */
+#define DRM_MODE_REFLECT_X (1<<4)
+#define DRM_MODE_REFLECT_Y (1<<5)
+
+/*
+ * DRM_MODE_REFLECT_MASK
+ *
+ * Bitmask used to look for drm plane reflections.
+ */
+#define DRM_MODE_REFLECT_MASK (\
+ DRM_MODE_REFLECT_X | \
+ DRM_MODE_REFLECT_Y)
+
+/* Content Protection Flags */
+#define DRM_MODE_CONTENT_PROTECTION_UNDESIRED 0
+#define DRM_MODE_CONTENT_PROTECTION_DESIRED 1
+#define DRM_MODE_CONTENT_PROTECTION_ENABLED 2
+
+/**
+ * struct drm_mode_modeinfo - Display mode information.
+ * @clock: pixel clock in kHz
+ * @hdisplay: horizontal display size
+ * @hsync_start: horizontal sync start
+ * @hsync_end: horizontal sync end
+ * @htotal: horizontal total size
+ * @hskew: horizontal skew
+ * @vdisplay: vertical display size
+ * @vsync_start: vertical sync start
+ * @vsync_end: vertical sync end
+ * @vtotal: vertical total size
+ * @vscan: vertical scan
+ * @vrefresh: approximate vertical refresh rate in Hz
+ * @flags: bitmask of misc. flags, see DRM_MODE_FLAG_* defines
+ * @type: bitmask of type flags, see DRM_MODE_TYPE_* defines
+ * @name: string describing the mode resolution
+ *
+ * This is the user-space API display mode information structure. For the
+ * kernel version see struct drm_display_mode.
+ */
+struct drm_mode_modeinfo {
+ __u32 clock;
+ __u16 hdisplay;
+ __u16 hsync_start;
+ __u16 hsync_end;
+ __u16 htotal;
+ __u16 hskew;
+ __u16 vdisplay;
+ __u16 vsync_start;
+ __u16 vsync_end;
+ __u16 vtotal;
+ __u16 vscan;
+
+ __u32 vrefresh;
+
+ __u32 flags;
+ __u32 type;
+ char name[DRM_DISPLAY_MODE_LEN];
+};
+
+struct drm_mode_card_res {
+ __u64 fb_id_ptr;
+ __u64 crtc_id_ptr;
+ __u64 connector_id_ptr;
+ __u64 encoder_id_ptr;
+ __u32 count_fbs;
+ __u32 count_crtcs;
+ __u32 count_connectors;
+ __u32 count_encoders;
+ __u32 min_width;
+ __u32 max_width;
+ __u32 min_height;
+ __u32 max_height;
+};
+
+struct drm_mode_crtc {
+ __u64 set_connectors_ptr;
+ __u32 count_connectors;
+
+ __u32 crtc_id; /**< Id */
+ __u32 fb_id; /**< Id of framebuffer */
+
+ __u32 x; /**< x Position on the framebuffer */
+ __u32 y; /**< y Position on the framebuffer */
+
+ __u32 gamma_size;
+ __u32 mode_valid;
+ struct drm_mode_modeinfo mode;
+};
+
+#define DRM_MODE_PRESENT_TOP_FIELD (1<<0)
+#define DRM_MODE_PRESENT_BOTTOM_FIELD (1<<1)
+
+/* Planes blend with or override other bits on the CRTC */
+struct drm_mode_set_plane {
+ __u32 plane_id;
+ __u32 crtc_id;
+ __u32 fb_id; /* fb object contains surface format type */
+ __u32 flags; /* see above flags */
+
+ /* Signed dest location allows it to be partially off screen */
+ __s32 crtc_x;
+ __s32 crtc_y;
+ __u32 crtc_w;
+ __u32 crtc_h;
+
+ /* Source values are 16.16 fixed point */
+ __u32 src_x;
+ __u32 src_y;
+ __u32 src_h;
+ __u32 src_w;
+};
+
+/**
+ * struct drm_mode_get_plane - Get plane metadata.
+ *
+ * Userspace can perform a GETPLANE ioctl to retrieve information about a
+ * plane.
+ *
+ * To retrieve the number of formats supported, set @count_format_types to zero
+ * and call the ioctl. @count_format_types will be updated with the value.
+ *
+ * To retrieve these formats, allocate an array with the memory needed to store
+ * @count_format_types formats. Point @format_type_ptr to this array and call
+ * the ioctl again (with @count_format_types still set to the value returned in
+ * the first ioctl call).
+ */
+struct drm_mode_get_plane {
+ /**
+ * @plane_id: Object ID of the plane whose information should be
+ * retrieved. Set by caller.
+ */
+ __u32 plane_id;
+
+ /** @crtc_id: Object ID of the current CRTC. */
+ __u32 crtc_id;
+ /** @fb_id: Object ID of the current fb. */
+ __u32 fb_id;
+
+ /**
+ * @possible_crtcs: Bitmask of CRTC's compatible with the plane. CRTC's
+ * are created and they receive an index, which corresponds to their
+ * position in the bitmask. Bit N corresponds to
+ * :ref:`CRTC index<crtc_index>` N.
+ */
+ __u32 possible_crtcs;
+ /** @gamma_size: Never used. */
+ __u32 gamma_size;
+
+ /** @count_format_types: Number of formats. */
+ __u32 count_format_types;
+ /**
+ * @format_type_ptr: Pointer to ``__u32`` array of formats that are
+ * supported by the plane. These formats do not require modifiers.
+ */
+ __u64 format_type_ptr;
+};
+
+struct drm_mode_get_plane_res {
+ __u64 plane_id_ptr;
+ __u32 count_planes;
+};
+
+#define DRM_MODE_ENCODER_NONE 0
+#define DRM_MODE_ENCODER_DAC 1
+#define DRM_MODE_ENCODER_TMDS 2
+#define DRM_MODE_ENCODER_LVDS 3
+#define DRM_MODE_ENCODER_TVDAC 4
+#define DRM_MODE_ENCODER_VIRTUAL 5
+#define DRM_MODE_ENCODER_DSI 6
+#define DRM_MODE_ENCODER_DPMST 7
+#define DRM_MODE_ENCODER_DPI 8
+
+struct drm_mode_get_encoder {
+ __u32 encoder_id;
+ __u32 encoder_type;
+
+ __u32 crtc_id; /**< Id of crtc */
+
+ __u32 possible_crtcs;
+ __u32 possible_clones;
+};
+
+/* This is for connectors with multiple signal types. */
+/* Try to match DRM_MODE_CONNECTOR_X as closely as possible. */
+enum drm_mode_subconnector {
+ DRM_MODE_SUBCONNECTOR_Automatic = 0, /* DVI-I, TV */
+ DRM_MODE_SUBCONNECTOR_Unknown = 0, /* DVI-I, TV, DP */
+ DRM_MODE_SUBCONNECTOR_VGA = 1, /* DP */
+ DRM_MODE_SUBCONNECTOR_DVID = 3, /* DVI-I DP */
+ DRM_MODE_SUBCONNECTOR_DVIA = 4, /* DVI-I */
+ DRM_MODE_SUBCONNECTOR_Composite = 5, /* TV */
+ DRM_MODE_SUBCONNECTOR_SVIDEO = 6, /* TV */
+ DRM_MODE_SUBCONNECTOR_Component = 8, /* TV */
+ DRM_MODE_SUBCONNECTOR_SCART = 9, /* TV */
+ DRM_MODE_SUBCONNECTOR_DisplayPort = 10, /* DP */
+ DRM_MODE_SUBCONNECTOR_HDMIA = 11, /* DP */
+ DRM_MODE_SUBCONNECTOR_Native = 15, /* DP */
+ DRM_MODE_SUBCONNECTOR_Wireless = 18, /* DP */
+};
+
+#define DRM_MODE_CONNECTOR_Unknown 0
+#define DRM_MODE_CONNECTOR_VGA 1
+#define DRM_MODE_CONNECTOR_DVII 2
+#define DRM_MODE_CONNECTOR_DVID 3
+#define DRM_MODE_CONNECTOR_DVIA 4
+#define DRM_MODE_CONNECTOR_Composite 5
+#define DRM_MODE_CONNECTOR_SVIDEO 6
+#define DRM_MODE_CONNECTOR_LVDS 7
+#define DRM_MODE_CONNECTOR_Component 8
+#define DRM_MODE_CONNECTOR_9PinDIN 9
+#define DRM_MODE_CONNECTOR_DisplayPort 10
+#define DRM_MODE_CONNECTOR_HDMIA 11
+#define DRM_MODE_CONNECTOR_HDMIB 12
+#define DRM_MODE_CONNECTOR_TV 13
+#define DRM_MODE_CONNECTOR_eDP 14
+#define DRM_MODE_CONNECTOR_VIRTUAL 15
+#define DRM_MODE_CONNECTOR_DSI 16
+#define DRM_MODE_CONNECTOR_DPI 17
+#define DRM_MODE_CONNECTOR_WRITEBACK 18
+#define DRM_MODE_CONNECTOR_SPI 19
+#define DRM_MODE_CONNECTOR_USB 20
+
+/**
+ * struct drm_mode_get_connector - Get connector metadata.
+ *
+ * User-space can perform a GETCONNECTOR ioctl to retrieve information about a
+ * connector. User-space is expected to retrieve encoders, modes and properties
+ * by performing this ioctl at least twice: the first time to retrieve the
+ * number of elements, the second time to retrieve the elements themselves.
+ *
+ * To retrieve the number of elements, set @count_props and @count_encoders to
+ * zero, set @count_modes to 1, and set @modes_ptr to a temporary struct
+ * drm_mode_modeinfo element.
+ *
+ * To retrieve the elements, allocate arrays for @encoders_ptr, @modes_ptr,
+ * @props_ptr and @prop_values_ptr, then set @count_modes, @count_props and
+ * @count_encoders to their capacity.
+ *
+ * Performing the ioctl only twice may be racy: the number of elements may have
+ * changed with a hotplug event in-between the two ioctls. User-space is
+ * expected to retry the last ioctl until the number of elements stabilizes.
+ * The kernel won't fill any array which doesn't have the expected length.
+ *
+ * **Force-probing a connector**
+ *
+ * If the @count_modes field is set to zero and the DRM client is the current
+ * DRM master, the kernel will perform a forced probe on the connector to
+ * refresh the connector status, modes and EDID. A forced-probe can be slow,
+ * might cause flickering and the ioctl will block.
+ *
+ * User-space needs to force-probe connectors to ensure their metadata is
+ * up-to-date at startup and after receiving a hot-plug event. User-space
+ * may perform a forced-probe when the user explicitly requests it. User-space
+ * shouldn't perform a forced-probe in other situations.
+ */
+struct drm_mode_get_connector {
+ /** @encoders_ptr: Pointer to ``__u32`` array of object IDs. */
+ __u64 encoders_ptr;
+ /** @modes_ptr: Pointer to struct drm_mode_modeinfo array. */
+ __u64 modes_ptr;
+ /** @props_ptr: Pointer to ``__u32`` array of property IDs. */
+ __u64 props_ptr;
+ /** @prop_values_ptr: Pointer to ``__u64`` array of property values. */
+ __u64 prop_values_ptr;
+
+ /** @count_modes: Number of modes. */
+ __u32 count_modes;
+ /** @count_props: Number of properties. */
+ __u32 count_props;
+ /** @count_encoders: Number of encoders. */
+ __u32 count_encoders;
+
+ /** @encoder_id: Object ID of the current encoder. */
+ __u32 encoder_id;
+ /** @connector_id: Object ID of the connector. */
+ __u32 connector_id;
+ /**
+ * @connector_type: Type of the connector.
+ *
+ * See DRM_MODE_CONNECTOR_* defines.
+ */
+ __u32 connector_type;
+ /**
+ * @connector_type_id: Type-specific connector number.
+ *
+ * This is not an object ID. This is a per-type connector number. Each
+ * (type, type_id) combination is unique across all connectors of a DRM
+ * device.
+ *
+ * The (type, type_id) combination is not a stable identifier: the
+ * type_id can change depending on the driver probe order.
+ */
+ __u32 connector_type_id;
+
+ /**
+ * @connection: Status of the connector.
+ *
+ * See enum drm_connector_status.
+ */
+ __u32 connection;
+ /** @mm_width: Width of the connected sink in millimeters. */
+ __u32 mm_width;
+ /** @mm_height: Height of the connected sink in millimeters. */
+ __u32 mm_height;
+ /**
+ * @subpixel: Subpixel order of the connected sink.
+ *
+ * See enum subpixel_order.
+ */
+ __u32 subpixel;
+
+ /** @pad: Padding, must be zero. */
+ __u32 pad;
+};
+
+#define DRM_MODE_PROP_PENDING (1<<0) /* deprecated, do not use */
+#define DRM_MODE_PROP_RANGE (1<<1)
+#define DRM_MODE_PROP_IMMUTABLE (1<<2)
+#define DRM_MODE_PROP_ENUM (1<<3) /* enumerated type with text strings */
+#define DRM_MODE_PROP_BLOB (1<<4)
+#define DRM_MODE_PROP_BITMASK (1<<5) /* bitmask of enumerated types */
+
+/* non-extended types: legacy bitmask, one bit per type: */
+#define DRM_MODE_PROP_LEGACY_TYPE ( \
+ DRM_MODE_PROP_RANGE | \
+ DRM_MODE_PROP_ENUM | \
+ DRM_MODE_PROP_BLOB | \
+ DRM_MODE_PROP_BITMASK)
+
+/* extended-types: rather than continue to consume a bit per type,
+ * grab a chunk of the bits to use as integer type id.
+ */
+#define DRM_MODE_PROP_EXTENDED_TYPE 0x0000ffc0
+#define DRM_MODE_PROP_TYPE(n) ((n) << 6)
+#define DRM_MODE_PROP_OBJECT DRM_MODE_PROP_TYPE(1)
+#define DRM_MODE_PROP_SIGNED_RANGE DRM_MODE_PROP_TYPE(2)
+
+/* the PROP_ATOMIC flag is used to hide properties from userspace that
+ * is not aware of atomic properties. This is mostly to work around
+ * older userspace (DDX drivers) that read/write each prop they find,
+ * without being aware that this could be triggering a lengthy modeset.
+ */
+#define DRM_MODE_PROP_ATOMIC 0x80000000
+
+/**
+ * struct drm_mode_property_enum - Description for an enum/bitfield entry.
+ * @value: numeric value for this enum entry.
+ * @name: symbolic name for this enum entry.
+ *
+ * See struct drm_property_enum for details.
+ */
+struct drm_mode_property_enum {
+ __u64 value;
+ char name[DRM_PROP_NAME_LEN];
+};
+
+/**
+ * struct drm_mode_get_property - Get property metadata.
+ *
+ * User-space can perform a GETPROPERTY ioctl to retrieve information about a
+ * property. The same property may be attached to multiple objects, see
+ * "Modeset Base Object Abstraction".
+ *
+ * The meaning of the @values_ptr field changes depending on the property type.
+ * See &drm_property.flags for more details.
+ *
+ * The @enum_blob_ptr and @count_enum_blobs fields are only meaningful when the
+ * property has the type &DRM_MODE_PROP_ENUM or &DRM_MODE_PROP_BITMASK. For
+ * backwards compatibility, the kernel will always set @count_enum_blobs to
+ * zero when the property has the type &DRM_MODE_PROP_BLOB. User-space must
+ * ignore these two fields if the property has a different type.
+ *
+ * User-space is expected to retrieve values and enums by performing this ioctl
+ * at least twice: the first time to retrieve the number of elements, the
+ * second time to retrieve the elements themselves.
+ *
+ * To retrieve the number of elements, set @count_values and @count_enum_blobs
+ * to zero, then call the ioctl. @count_values will be updated with the number
+ * of elements. If the property has the type &DRM_MODE_PROP_ENUM or
+ * &DRM_MODE_PROP_BITMASK, @count_enum_blobs will be updated as well.
+ *
+ * To retrieve the elements themselves, allocate an array for @values_ptr and
+ * set @count_values to its capacity. If the property has the type
+ * &DRM_MODE_PROP_ENUM or &DRM_MODE_PROP_BITMASK, allocate an array for
+ * @enum_blob_ptr and set @count_enum_blobs to its capacity. Calling the ioctl
+ * again will fill the arrays.
+ */
+struct drm_mode_get_property {
+ /** @values_ptr: Pointer to a ``__u64`` array. */
+ __u64 values_ptr;
+ /** @enum_blob_ptr: Pointer to a struct drm_mode_property_enum array. */
+ __u64 enum_blob_ptr;
+
+ /**
+ * @prop_id: Object ID of the property which should be retrieved. Set
+ * by the caller.
+ */
+ __u32 prop_id;
+ /**
+ * @flags: ``DRM_MODE_PROP_*`` bitfield. See &drm_property.flags for
+ * a definition of the flags.
+ */
+ __u32 flags;
+ /**
+ * @name: Symbolic property name. User-space should use this field to
+ * recognize properties.
+ */
+ char name[DRM_PROP_NAME_LEN];
+
+ /** @count_values: Number of elements in @values_ptr. */
+ __u32 count_values;
+ /** @count_enum_blobs: Number of elements in @enum_blob_ptr. */
+ __u32 count_enum_blobs;
+};
+
+struct drm_mode_connector_set_property {
+ __u64 value;
+ __u32 prop_id;
+ __u32 connector_id;
+};
+
+#define DRM_MODE_OBJECT_CRTC 0xcccccccc
+#define DRM_MODE_OBJECT_CONNECTOR 0xc0c0c0c0
+#define DRM_MODE_OBJECT_ENCODER 0xe0e0e0e0
+#define DRM_MODE_OBJECT_MODE 0xdededede
+#define DRM_MODE_OBJECT_PROPERTY 0xb0b0b0b0
+#define DRM_MODE_OBJECT_FB 0xfbfbfbfb
+#define DRM_MODE_OBJECT_BLOB 0xbbbbbbbb
+#define DRM_MODE_OBJECT_PLANE 0xeeeeeeee
+#define DRM_MODE_OBJECT_ANY 0
+
+struct drm_mode_obj_get_properties {
+ __u64 props_ptr;
+ __u64 prop_values_ptr;
+ __u32 count_props;
+ __u32 obj_id;
+ __u32 obj_type;
+};
+
+struct drm_mode_obj_set_property {
+ __u64 value;
+ __u32 prop_id;
+ __u32 obj_id;
+ __u32 obj_type;
+};
+
+struct drm_mode_get_blob {
+ __u32 blob_id;
+ __u32 length;
+ __u64 data;
+};
+
+struct drm_mode_fb_cmd {
+ __u32 fb_id;
+ __u32 width;
+ __u32 height;
+ __u32 pitch;
+ __u32 bpp;
+ __u32 depth;
+ /* driver specific handle */
+ __u32 handle;
+};
+
+#define DRM_MODE_FB_INTERLACED (1<<0) /* for interlaced framebuffers */
+#define DRM_MODE_FB_MODIFIERS (1<<1) /* enables ->modifier[] */
+
+/**
+ * struct drm_mode_fb_cmd2 - Frame-buffer metadata.
+ *
+ * This struct holds frame-buffer metadata. There are two ways to use it:
+ *
+ * - User-space can fill this struct and perform a &DRM_IOCTL_MODE_ADDFB2
+ * ioctl to register a new frame-buffer. The new frame-buffer object ID will
+ * be set by the kernel in @fb_id.
+ * - User-space can set @fb_id and perform a &DRM_IOCTL_MODE_GETFB2 ioctl to
+ * fetch metadata about an existing frame-buffer.
+ *
+ * In case of planar formats, this struct allows up to 4 buffer objects with
+ * offsets and pitches per plane. The pitch and offset order are dictated by
+ * the format FourCC as defined by ``drm_fourcc.h``, e.g. NV12 is described as:
+ *
+ * YUV 4:2:0 image with a plane of 8-bit Y samples followed by an
+ * interleaved U/V plane containing 8-bit 2x2 subsampled colour difference
+ * samples.
+ *
+ * So it would consist of a Y plane at ``offsets[0]`` and a UV plane at
+ * ``offsets[1]``.
+ *
+ * To accommodate tiled, compressed, etc formats, a modifier can be specified.
+ * For more information see the "Format Modifiers" section. Note that even
+ * though it looks like we have a modifier per-plane, we in fact do not. The
+ * modifier for each plane must be identical. Thus all combinations of
+ * different data layouts for multi-plane formats must be enumerated as
+ * separate modifiers.
+ *
+ * All of the entries in @handles, @pitches, @offsets and @modifier must be
+ * zero when unused. Warning, for @offsets and @modifier zero can't be used to
+ * figure out whether the entry is used or not since it's a valid value (a zero
+ * offset is common, and a zero modifier is &DRM_FORMAT_MOD_LINEAR).
+ */
+struct drm_mode_fb_cmd2 {
+ /** @fb_id: Object ID of the frame-buffer. */
+ __u32 fb_id;
+ /** @width: Width of the frame-buffer. */
+ __u32 width;
+ /** @height: Height of the frame-buffer. */
+ __u32 height;
+ /**
+ * @pixel_format: FourCC format code, see ``DRM_FORMAT_*`` constants in
+ * ``drm_fourcc.h``.
+ */
+ __u32 pixel_format;
+ /**
+ * @flags: Frame-buffer flags (see &DRM_MODE_FB_INTERLACED and
+ * &DRM_MODE_FB_MODIFIERS).
+ */
+ __u32 flags;
+
+ /**
+ * @handles: GEM buffer handle, one per plane. Set to 0 if the plane is
+ * unused. The same handle can be used for multiple planes.
+ */
+ __u32 handles[4];
+ /** @pitches: Pitch (aka. stride) in bytes, one per plane. */
+ __u32 pitches[4];
+ /** @offsets: Offset into the buffer in bytes, one per plane. */
+ __u32 offsets[4];
+ /**
+ * @modifier: Format modifier, one per plane. See ``DRM_FORMAT_MOD_*``
+ * constants in ``drm_fourcc.h``. All planes must use the same
+ * modifier. Ignored unless &DRM_MODE_FB_MODIFIERS is set in @flags.
+ */
+ __u64 modifier[4];
+};
+
+#define DRM_MODE_FB_DIRTY_ANNOTATE_COPY 0x01
+#define DRM_MODE_FB_DIRTY_ANNOTATE_FILL 0x02
+#define DRM_MODE_FB_DIRTY_FLAGS 0x03
+
+#define DRM_MODE_FB_DIRTY_MAX_CLIPS 256
+
+/*
+ * Mark a region of a framebuffer as dirty.
+ *
+ * Some hardware does not automatically update display contents
+ * as a hardware or software draw to a framebuffer. This ioctl
+ * allows userspace to tell the kernel and the hardware what
+ * regions of the framebuffer have changed.
+ *
+ * The kernel or hardware is free to update more then just the
+ * region specified by the clip rects. The kernel or hardware
+ * may also delay and/or coalesce several calls to dirty into a
+ * single update.
+ *
+ * Userspace may annotate the updates, the annotates are a
+ * promise made by the caller that the change is either a copy
+ * of pixels or a fill of a single color in the region specified.
+ *
+ * If the DRM_MODE_FB_DIRTY_ANNOTATE_COPY flag is given then
+ * the number of updated regions are half of num_clips given,
+ * where the clip rects are paired in src and dst. The width and
+ * height of each one of the pairs must match.
+ *
+ * If the DRM_MODE_FB_DIRTY_ANNOTATE_FILL flag is given the caller
+ * promises that the region specified of the clip rects is filled
+ * completely with a single color as given in the color argument.
+ */
+
+struct drm_mode_fb_dirty_cmd {
+ __u32 fb_id;
+ __u32 flags;
+ __u32 color;
+ __u32 num_clips;
+ __u64 clips_ptr;
+};
+
+struct drm_mode_mode_cmd {
+ __u32 connector_id;
+ struct drm_mode_modeinfo mode;
+};
+
+#define DRM_MODE_CURSOR_BO 0x01
+#define DRM_MODE_CURSOR_MOVE 0x02
+#define DRM_MODE_CURSOR_FLAGS 0x03
+
+/*
+ * depending on the value in flags different members are used.
+ *
+ * CURSOR_BO uses
+ * crtc_id
+ * width
+ * height
+ * handle - if 0 turns the cursor off
+ *
+ * CURSOR_MOVE uses
+ * crtc_id
+ * x
+ * y
+ */
+struct drm_mode_cursor {
+ __u32 flags;
+ __u32 crtc_id;
+ __s32 x;
+ __s32 y;
+ __u32 width;
+ __u32 height;
+ /* driver specific handle */
+ __u32 handle;
+};
+
+struct drm_mode_cursor2 {
+ __u32 flags;
+ __u32 crtc_id;
+ __s32 x;
+ __s32 y;
+ __u32 width;
+ __u32 height;
+ /* driver specific handle */
+ __u32 handle;
+ __s32 hot_x;
+ __s32 hot_y;
+};
+
+struct drm_mode_crtc_lut {
+ __u32 crtc_id;
+ __u32 gamma_size;
+
+ /* pointers to arrays */
+ __u64 red;
+ __u64 green;
+ __u64 blue;
+};
+
+struct drm_color_ctm {
+ /*
+ * Conversion matrix in S31.32 sign-magnitude
+ * (not two's complement!) format.
+ *
+ * out matrix in
+ * |R| |0 1 2| |R|
+ * |G| = |3 4 5| x |G|
+ * |B| |6 7 8| |B|
+ */
+ __u64 matrix[9];
+};
+
+struct drm_color_lut {
+ /*
+ * Values are mapped linearly to 0.0 - 1.0 range, with 0x0 == 0.0 and
+ * 0xffff == 1.0.
+ */
+ __u16 red;
+ __u16 green;
+ __u16 blue;
+ __u16 reserved;
+};
+
+/**
+ * struct drm_plane_size_hint - Plane size hints
+ * @width: The width of the plane in pixel
+ * @height: The height of the plane in pixel
+ *
+ * The plane SIZE_HINTS property blob contains an
+ * array of struct drm_plane_size_hint.
+ */
+struct drm_plane_size_hint {
+ __u16 width;
+ __u16 height;
+};
+
+/**
+ * struct hdr_metadata_infoframe - HDR Metadata Infoframe Data.
+ *
+ * HDR Metadata Infoframe as per CTA 861.G spec. This is expected
+ * to match exactly with the spec.
+ *
+ * Userspace is expected to pass the metadata information as per
+ * the format described in this structure.
+ */
+struct hdr_metadata_infoframe {
+ /**
+ * @eotf: Electro-Optical Transfer Function (EOTF)
+ * used in the stream.
+ */
+ __u8 eotf;
+ /**
+ * @metadata_type: Static_Metadata_Descriptor_ID.
+ */
+ __u8 metadata_type;
+ /**
+ * @display_primaries: Color Primaries of the Data.
+ * These are coded as unsigned 16-bit values in units of
+ * 0.00002, where 0x0000 represents zero and 0xC350
+ * represents 1.0000.
+ * @display_primaries.x: X coordinate of color primary.
+ * @display_primaries.y: Y coordinate of color primary.
+ */
+ struct {
+ __u16 x, y;
+ } display_primaries[3];
+ /**
+ * @white_point: White Point of Colorspace Data.
+ * These are coded as unsigned 16-bit values in units of
+ * 0.00002, where 0x0000 represents zero and 0xC350
+ * represents 1.0000.
+ * @white_point.x: X coordinate of whitepoint of color primary.
+ * @white_point.y: Y coordinate of whitepoint of color primary.
+ */
+ struct {
+ __u16 x, y;
+ } white_point;
+ /**
+ * @max_display_mastering_luminance: Max Mastering Display Luminance.
+ * This value is coded as an unsigned 16-bit value in units of 1 cd/m2,
+ * where 0x0001 represents 1 cd/m2 and 0xFFFF represents 65535 cd/m2.
+ */
+ __u16 max_display_mastering_luminance;
+ /**
+ * @min_display_mastering_luminance: Min Mastering Display Luminance.
+ * This value is coded as an unsigned 16-bit value in units of
+ * 0.0001 cd/m2, where 0x0001 represents 0.0001 cd/m2 and 0xFFFF
+ * represents 6.5535 cd/m2.
+ */
+ __u16 min_display_mastering_luminance;
+ /**
+ * @max_cll: Max Content Light Level.
+ * This value is coded as an unsigned 16-bit value in units of 1 cd/m2,
+ * where 0x0001 represents 1 cd/m2 and 0xFFFF represents 65535 cd/m2.
+ */
+ __u16 max_cll;
+ /**
+ * @max_fall: Max Frame Average Light Level.
+ * This value is coded as an unsigned 16-bit value in units of 1 cd/m2,
+ * where 0x0001 represents 1 cd/m2 and 0xFFFF represents 65535 cd/m2.
+ */
+ __u16 max_fall;
+};
+
+/**
+ * struct hdr_output_metadata - HDR output metadata
+ *
+ * Metadata Information to be passed from userspace
+ */
+struct hdr_output_metadata {
+ /**
+ * @metadata_type: Static_Metadata_Descriptor_ID.
+ */
+ __u32 metadata_type;
+ /**
+ * @hdmi_metadata_type1: HDR Metadata Infoframe.
+ */
+ union {
+ struct hdr_metadata_infoframe hdmi_metadata_type1;
+ };
+};
+
+/**
+ * DRM_MODE_PAGE_FLIP_EVENT
+ *
+ * Request that the kernel sends back a vblank event (see
+ * struct drm_event_vblank) with the &DRM_EVENT_FLIP_COMPLETE type when the
+ * page-flip is done.
+ *
+ * When used with atomic uAPI, one event will be delivered per CRTC included in
+ * the atomic commit. A CRTC is included in an atomic commit if one of its
+ * properties is set, or if a property is set on a connector or plane linked
+ * via the CRTC_ID property to the CRTC. At least one CRTC must be included,
+ * and all pulled in CRTCs must be either previously or newly powered on (in
+ * other words, a powered off CRTC which stays off cannot be included in the
+ * atomic commit).
+ */
+#define DRM_MODE_PAGE_FLIP_EVENT 0x01
+/**
+ * DRM_MODE_PAGE_FLIP_ASYNC
+ *
+ * Request that the page-flip is performed as soon as possible, ie. with no
+ * delay due to waiting for vblank. This may cause tearing to be visible on
+ * the screen.
+ *
+ * When used with atomic uAPI, the driver will return an error if the hardware
+ * doesn't support performing an asynchronous page-flip for this update.
+ * User-space should handle this, e.g. by falling back to a regular page-flip.
+ *
+ * Note, some hardware might need to perform one last synchronous page-flip
+ * before being able to switch to asynchronous page-flips. As an exception,
+ * the driver will return success even though that first page-flip is not
+ * asynchronous.
+ */
+#define DRM_MODE_PAGE_FLIP_ASYNC 0x02
+#define DRM_MODE_PAGE_FLIP_TARGET_ABSOLUTE 0x4
+#define DRM_MODE_PAGE_FLIP_TARGET_RELATIVE 0x8
+#define DRM_MODE_PAGE_FLIP_TARGET (DRM_MODE_PAGE_FLIP_TARGET_ABSOLUTE | \
+ DRM_MODE_PAGE_FLIP_TARGET_RELATIVE)
+/**
+ * DRM_MODE_PAGE_FLIP_FLAGS
+ *
+ * Bitmask of flags suitable for &drm_mode_crtc_page_flip_target.flags.
+ */
+#define DRM_MODE_PAGE_FLIP_FLAGS (DRM_MODE_PAGE_FLIP_EVENT | \
+ DRM_MODE_PAGE_FLIP_ASYNC | \
+ DRM_MODE_PAGE_FLIP_TARGET)
+
+/*
+ * Request a page flip on the specified crtc.
+ *
+ * This ioctl will ask KMS to schedule a page flip for the specified
+ * crtc. Once any pending rendering targeting the specified fb (as of
+ * ioctl time) has completed, the crtc will be reprogrammed to display
+ * that fb after the next vertical refresh. The ioctl returns
+ * immediately, but subsequent rendering to the current fb will block
+ * in the execbuffer ioctl until the page flip happens. If a page
+ * flip is already pending as the ioctl is called, EBUSY will be
+ * returned.
+ *
+ * Flag DRM_MODE_PAGE_FLIP_EVENT requests that drm sends back a vblank
+ * event (see drm.h: struct drm_event_vblank) when the page flip is
+ * done. The user_data field passed in with this ioctl will be
+ * returned as the user_data field in the vblank event struct.
+ *
+ * Flag DRM_MODE_PAGE_FLIP_ASYNC requests that the flip happen
+ * 'as soon as possible', meaning that it not delay waiting for vblank.
+ * This may cause tearing on the screen.
+ *
+ * The reserved field must be zero.
+ */
+
+struct drm_mode_crtc_page_flip {
+ __u32 crtc_id;
+ __u32 fb_id;
+ __u32 flags;
+ __u32 reserved;
+ __u64 user_data;
+};
+
+/*
+ * Request a page flip on the specified crtc.
+ *
+ * Same as struct drm_mode_crtc_page_flip, but supports new flags and
+ * re-purposes the reserved field:
+ *
+ * The sequence field must be zero unless either of the
+ * DRM_MODE_PAGE_FLIP_TARGET_ABSOLUTE/RELATIVE flags is specified. When
+ * the ABSOLUTE flag is specified, the sequence field denotes the absolute
+ * vblank sequence when the flip should take effect. When the RELATIVE
+ * flag is specified, the sequence field denotes the relative (to the
+ * current one when the ioctl is called) vblank sequence when the flip
+ * should take effect. NOTE: DRM_IOCTL_WAIT_VBLANK must still be used to
+ * make sure the vblank sequence before the target one has passed before
+ * calling this ioctl. The purpose of the
+ * DRM_MODE_PAGE_FLIP_TARGET_ABSOLUTE/RELATIVE flags is merely to clarify
+ * the target for when code dealing with a page flip runs during a
+ * vertical blank period.
+ */
+
+struct drm_mode_crtc_page_flip_target {
+ __u32 crtc_id;
+ __u32 fb_id;
+ __u32 flags;
+ __u32 sequence;
+ __u64 user_data;
+};
+
+/**
+ * struct drm_mode_create_dumb - Create a KMS dumb buffer for scanout.
+ * @height: buffer height in pixels
+ * @width: buffer width in pixels
+ * @bpp: bits per pixel
+ * @flags: must be zero
+ * @handle: buffer object handle
+ * @pitch: number of bytes between two consecutive lines
+ * @size: size of the whole buffer in bytes
+ *
+ * User-space fills @height, @width, @bpp and @flags. If the IOCTL succeeds,
+ * the kernel fills @handle, @pitch and @size.
+ */
+struct drm_mode_create_dumb {
+ __u32 height;
+ __u32 width;
+ __u32 bpp;
+ __u32 flags;
+
+ __u32 handle;
+ __u32 pitch;
+ __u64 size;
+};
+
+/* set up for mmap of a dumb scanout buffer */
+struct drm_mode_map_dumb {
+ /** Handle for the object being mapped. */
+ __u32 handle;
+ __u32 pad;
+ /**
+ * Fake offset to use for subsequent mmap call
+ *
+ * This is a fixed-size type for 32/64 compatibility.
+ */
+ __u64 offset;
+};
+
+struct drm_mode_destroy_dumb {
+ __u32 handle;
+};
+
+/**
+ * DRM_MODE_ATOMIC_TEST_ONLY
+ *
+ * Do not apply the atomic commit, instead check whether the hardware supports
+ * this configuration.
+ *
+ * See &drm_mode_config_funcs.atomic_check for more details on test-only
+ * commits.
+ */
+#define DRM_MODE_ATOMIC_TEST_ONLY 0x0100
+/**
+ * DRM_MODE_ATOMIC_NONBLOCK
+ *
+ * Do not block while applying the atomic commit. The &DRM_IOCTL_MODE_ATOMIC
+ * IOCTL returns immediately instead of waiting for the changes to be applied
+ * in hardware. Note, the driver will still check that the update can be
+ * applied before retuning.
+ */
+#define DRM_MODE_ATOMIC_NONBLOCK 0x0200
+/**
+ * DRM_MODE_ATOMIC_ALLOW_MODESET
+ *
+ * Allow the update to result in temporary or transient visible artifacts while
+ * the update is being applied. Applying the update may also take significantly
+ * more time than a page flip. All visual artifacts will disappear by the time
+ * the update is completed, as signalled through the vblank event's timestamp
+ * (see struct drm_event_vblank).
+ *
+ * This flag must be set when the KMS update might cause visible artifacts.
+ * Without this flag such KMS update will return a EINVAL error. What kind of
+ * update may cause visible artifacts depends on the driver and the hardware.
+ * User-space that needs to know beforehand if an update might cause visible
+ * artifacts can use &DRM_MODE_ATOMIC_TEST_ONLY without
+ * &DRM_MODE_ATOMIC_ALLOW_MODESET to see if it fails.
+ *
+ * To the best of the driver's knowledge, visual artifacts are guaranteed to
+ * not appear when this flag is not set. Some sinks might display visual
+ * artifacts outside of the driver's control.
+ */
+#define DRM_MODE_ATOMIC_ALLOW_MODESET 0x0400
+
+/**
+ * DRM_MODE_ATOMIC_FLAGS
+ *
+ * Bitfield of flags accepted by the &DRM_IOCTL_MODE_ATOMIC IOCTL in
+ * &drm_mode_atomic.flags.
+ */
+#define DRM_MODE_ATOMIC_FLAGS (\
+ DRM_MODE_PAGE_FLIP_EVENT |\
+ DRM_MODE_PAGE_FLIP_ASYNC |\
+ DRM_MODE_ATOMIC_TEST_ONLY |\
+ DRM_MODE_ATOMIC_NONBLOCK |\
+ DRM_MODE_ATOMIC_ALLOW_MODESET)
+
+struct drm_mode_atomic {
+ __u32 flags;
+ __u32 count_objs;
+ __u64 objs_ptr;
+ __u64 count_props_ptr;
+ __u64 props_ptr;
+ __u64 prop_values_ptr;
+ __u64 reserved;
+ __u64 user_data;
+};
+
+struct drm_format_modifier_blob {
+#define FORMAT_BLOB_CURRENT 1
+ /* Version of this blob format */
+ __u32 version;
+
+ /* Flags */
+ __u32 flags;
+
+ /* Number of fourcc formats supported */
+ __u32 count_formats;
+
+ /* Where in this blob the formats exist (in bytes) */
+ __u32 formats_offset;
+
+ /* Number of drm_format_modifiers */
+ __u32 count_modifiers;
+
+ /* Where in this blob the modifiers exist (in bytes) */
+ __u32 modifiers_offset;
+
+ /* __u32 formats[] */
+ /* struct drm_format_modifier modifiers[] */
+};
+
+struct drm_format_modifier {
+ /* Bitmask of formats in get_plane format list this info applies to. The
+ * offset allows a sliding window of which 64 formats (bits).
+ *
+ * Some examples:
+ * In today's world with < 65 formats, and formats 0, and 2 are
+ * supported
+ * 0x0000000000000005
+ * ^-offset = 0, formats = 5
+ *
+ * If the number formats grew to 128, and formats 98-102 are
+ * supported with the modifier:
+ *
+ * 0x0000007c00000000 0000000000000000
+ * ^
+ * |__offset = 64, formats = 0x7c00000000
+ *
+ */
+ __u64 formats;
+ __u32 offset;
+ __u32 pad;
+
+ /* The modifier that applies to the >get_plane format list bitmask. */
+ __u64 modifier;
+};
+
+/**
+ * struct drm_mode_create_blob - Create New blob property
+ *
+ * Create a new 'blob' data property, copying length bytes from data pointer,
+ * and returning new blob ID.
+ */
+struct drm_mode_create_blob {
+ /** @data: Pointer to data to copy. */
+ __u64 data;
+ /** @length: Length of data to copy. */
+ __u32 length;
+ /** @blob_id: Return: new property ID. */
+ __u32 blob_id;
+};
+
+/**
+ * struct drm_mode_destroy_blob - Destroy user blob
+ * @blob_id: blob_id to destroy
+ *
+ * Destroy a user-created blob property.
+ *
+ * User-space can release blobs as soon as they do not need to refer to them by
+ * their blob object ID. For instance, if you are using a MODE_ID blob in an
+ * atomic commit and you will not make another commit re-using the same ID, you
+ * can destroy the blob as soon as the commit has been issued, without waiting
+ * for it to complete.
+ */
+struct drm_mode_destroy_blob {
+ __u32 blob_id;
+};
+
+/**
+ * struct drm_mode_create_lease - Create lease
+ *
+ * Lease mode resources, creating another drm_master.
+ *
+ * The @object_ids array must reference at least one CRTC, one connector and
+ * one plane if &DRM_CLIENT_CAP_UNIVERSAL_PLANES is enabled. Alternatively,
+ * the lease can be completely empty.
+ */
+struct drm_mode_create_lease {
+ /** @object_ids: Pointer to array of object ids (__u32) */
+ __u64 object_ids;
+ /** @object_count: Number of object ids */
+ __u32 object_count;
+ /** @flags: flags for new FD (O_CLOEXEC, etc) */
+ __u32 flags;
+
+ /** @lessee_id: Return: unique identifier for lessee. */
+ __u32 lessee_id;
+ /** @fd: Return: file descriptor to new drm_master file */
+ __u32 fd;
+};
+
+/**
+ * struct drm_mode_list_lessees - List lessees
+ *
+ * List lesses from a drm_master.
+ */
+struct drm_mode_list_lessees {
+ /**
+ * @count_lessees: Number of lessees.
+ *
+ * On input, provides length of the array.
+ * On output, provides total number. No
+ * more than the input number will be written
+ * back, so two calls can be used to get
+ * the size and then the data.
+ */
+ __u32 count_lessees;
+ /** @pad: Padding. */
+ __u32 pad;
+
+ /**
+ * @lessees_ptr: Pointer to lessees.
+ *
+ * Pointer to __u64 array of lessee ids
+ */
+ __u64 lessees_ptr;
+};
+
+/**
+ * struct drm_mode_get_lease - Get Lease
+ *
+ * Get leased objects.
+ */
+struct drm_mode_get_lease {
+ /**
+ * @count_objects: Number of leased objects.
+ *
+ * On input, provides length of the array.
+ * On output, provides total number. No
+ * more than the input number will be written
+ * back, so two calls can be used to get
+ * the size and then the data.
+ */
+ __u32 count_objects;
+ /** @pad: Padding. */
+ __u32 pad;
+
+ /**
+ * @objects_ptr: Pointer to objects.
+ *
+ * Pointer to __u32 array of object ids.
+ */
+ __u64 objects_ptr;
+};
+
+/**
+ * struct drm_mode_revoke_lease - Revoke lease
+ */
+struct drm_mode_revoke_lease {
+ /** @lessee_id: Unique ID of lessee */
+ __u32 lessee_id;
+};
+
+/**
+ * struct drm_mode_rect - Two dimensional rectangle.
+ * @x1: Horizontal starting coordinate (inclusive).
+ * @y1: Vertical starting coordinate (inclusive).
+ * @x2: Horizontal ending coordinate (exclusive).
+ * @y2: Vertical ending coordinate (exclusive).
+ *
+ * With drm subsystem using struct drm_rect to manage rectangular area this
+ * export it to user-space.
+ *
+ * Currently used by drm_mode_atomic blob property FB_DAMAGE_CLIPS.
+ */
+struct drm_mode_rect {
+ __s32 x1;
+ __s32 y1;
+ __s32 x2;
+ __s32 y2;
+};
+
+/**
+ * struct drm_mode_closefb
+ * @fb_id: Framebuffer ID.
+ * @pad: Must be zero.
+ */
+struct drm_mode_closefb {
+ __u32 fb_id;
+ __u32 pad;
+};
+
+#if defined(__cplusplus)
+}
+#endif
+
+#endif
@@ -47,6 +47,8 @@ set +e
# Copy the headers
headers="
drm/drm_fourcc.h
+ drm/drm.h
+ drm/drm_mode.h
linux/dma-buf.h
linux/dma-heap.h
linux/dw100.h
We need DRM_FORMAT_ARGB8888 when doing eglCreateImageKHR. Copy the drm.h and its dependent drm_mode.h so that we can use the local drm.h. Take drm.h from kernel commit 08a99369f44e ("media: uapi: Add parameters structs to mali-c55-config.h"). Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> --- include/linux/drm.h | 1468 ++++++++++++++++++++++++++++++++ include/linux/drm_mode.h | 1370 +++++++++++++++++++++++++++++ utils/update-kernel-headers.sh | 2 + 3 files changed, 2840 insertions(+) create mode 100644 include/linux/drm.h create mode 100644 include/linux/drm_mode.h