Message ID | 20230118085953.7027-9-naush@raspberrypi.com |
---|---|
State | Superseded |
Headers | show |
Series |
|
Related | show |
Quoting Naushir Patuck via libcamera-devel (2023-01-18 08:59:49) > Look for OptionalStream flag in the hints field of the ISP Output0 > StreamConfiguration structure. If this flag is not set, it guarantees that the > application will provide buffers for the ISP, do not allocate any internal > buffers for the device. > > Signed-off-by: Naushir Patuck <naush@raspberrypi.com> If this is the chosen orientation of the hint, then: Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> > --- > .../pipeline/raspberrypi/raspberrypi.cpp | 29 ++++++++++++++----- > 1 file changed, 22 insertions(+), 7 deletions(-) > > diff --git a/src/libcamera/pipeline/raspberrypi/raspberrypi.cpp b/src/libcamera/pipeline/raspberrypi/raspberrypi.cpp > index 2b396f1db9b6..13d0ab4c4968 100644 > --- a/src/libcamera/pipeline/raspberrypi/raspberrypi.cpp > +++ b/src/libcamera/pipeline/raspberrypi/raspberrypi.cpp > @@ -1453,7 +1453,7 @@ int PipelineHandlerRPi::prepareBuffers(Camera *camera) > RPiCameraData *data = cameraData(camera); > unsigned int minUnicamBuffers = data->config_.minUnicamBuffers, > minTotalUnicamBuffers = data->config_.minTotalUnicamBuffers, > - numRawBuffers = 0; > + numRawBuffers = 0, minIspBuffers = 1; > int ret; > > for (Stream *s : camera->streams()) { > @@ -1477,8 +1477,21 @@ int PipelineHandlerRPi::prepareBuffers(Camera *camera) > minTotalUnicamBuffers = 0; > } > } > - > - break; > + } else if (s == &data->isp_[Isp::Output0]) { > + /* > + * Since the ISP runs synchronous with the IPA and requests, > + * we only ever need a maximum of one internal buffer. Any > + * buffers the application wants to hold onto will already > + * be exported through PipelineHandlerRPi::exportFrameBuffers(). > + * > + * However, as above, if the application provides a guarantee > + * that the buffer will always be provided for the ISP Output0 > + * stream in a Request, we don't need any internal buffers > + * allocated. > + */ > + if (!(s->configuration().hints & StreamConfiguration::Hint::OptionalStream) && > + !data->dropFrameCount_) > + minIspBuffers = 0; > } > } > > @@ -1514,12 +1527,14 @@ int PipelineHandlerRPi::prepareBuffers(Camera *camera) > * so allocate the minimum required to avoid frame drops. > */ > numBuffers = data->config_.minTotalUnicamBuffers; > + } else if (stream == &data->isp_[Isp::Output0]) { > + /* Buffer count for this is handled in the earlier loop above. */ > + numBuffers = minIspBuffers; > } else { > /* > - * Since the ISP runs synchronous with the IPA and requests, > - * we only ever need one set of internal buffers. Any buffers > - * the application wants to hold onto will already be exported > - * through PipelineHandlerRPi::exportFrameBuffers(). > + * Same reasoning as for ISP Output 0, we only ever need > + * a maximum of one internal buffer for Output1 (required > + * for colour denoise) and ISP statistics. > */ > numBuffers = 1; > } > -- > 2.25.1 >
Hi Naush, Thank you for the patch. On Wed, Jan 18, 2023 at 08:59:49AM +0000, Naushir Patuck via libcamera-devel wrote: > Look for OptionalStream flag in the hints field of the ISP Output0 > StreamConfiguration structure. If this flag is not set, it guarantees that the > application will provide buffers for the ISP, do not allocate any internal > buffers for the device. > > Signed-off-by: Naushir Patuck <naush@raspberrypi.com> > --- > .../pipeline/raspberrypi/raspberrypi.cpp | 29 ++++++++++++++----- > 1 file changed, 22 insertions(+), 7 deletions(-) > > diff --git a/src/libcamera/pipeline/raspberrypi/raspberrypi.cpp b/src/libcamera/pipeline/raspberrypi/raspberrypi.cpp > index 2b396f1db9b6..13d0ab4c4968 100644 > --- a/src/libcamera/pipeline/raspberrypi/raspberrypi.cpp > +++ b/src/libcamera/pipeline/raspberrypi/raspberrypi.cpp > @@ -1453,7 +1453,7 @@ int PipelineHandlerRPi::prepareBuffers(Camera *camera) > RPiCameraData *data = cameraData(camera); > unsigned int minUnicamBuffers = data->config_.minUnicamBuffers, > minTotalUnicamBuffers = data->config_.minTotalUnicamBuffers, > - numRawBuffers = 0; > + numRawBuffers = 0, minIspBuffers = 1; One variable per line. > int ret; > > for (Stream *s : camera->streams()) { > @@ -1477,8 +1477,21 @@ int PipelineHandlerRPi::prepareBuffers(Camera *camera) > minTotalUnicamBuffers = 0; > } > } > - > - break; > + } else if (s == &data->isp_[Isp::Output0]) { > + /* > + * Since the ISP runs synchronous with the IPA and requests, > + * we only ever need a maximum of one internal buffer. Any > + * buffers the application wants to hold onto will already > + * be exported through PipelineHandlerRPi::exportFrameBuffers(). > + * > + * However, as above, if the application provides a guarantee > + * that the buffer will always be provided for the ISP Output0 > + * stream in a Request, we don't need any internal buffers > + * allocated. > + */ > + if (!(s->configuration().hints & StreamConfiguration::Hint::OptionalStream) && > + !data->dropFrameCount_) > + minIspBuffers = 0; > } > } > > @@ -1514,12 +1527,14 @@ int PipelineHandlerRPi::prepareBuffers(Camera *camera) > * so allocate the minimum required to avoid frame drops. > */ > numBuffers = data->config_.minTotalUnicamBuffers; > + } else if (stream == &data->isp_[Isp::Output0]) { > + /* Buffer count for this is handled in the earlier loop above. */ > + numBuffers = minIspBuffers; > } else { > /* > - * Since the ISP runs synchronous with the IPA and requests, > - * we only ever need one set of internal buffers. Any buffers > - * the application wants to hold onto will already be exported > - * through PipelineHandlerRPi::exportFrameBuffers(). > + * Same reasoning as for ISP Output 0, we only ever need > + * a maximum of one internal buffer for Output1 (required > + * for colour denoise) and ISP statistics. > */ > numBuffers = 1; Do you plan to also optimize the buffer allocation based on hints for Output1 ? > }
Hi Laurent, Thank you for your feedback. On Sun, 22 Jan 2023 at 22:45, Laurent Pinchart <laurent.pinchart@ideasonboard.com> wrote: > > Hi Naush, > > Thank you for the patch. > > On Wed, Jan 18, 2023 at 08:59:49AM +0000, Naushir Patuck via libcamera-devel wrote: > > Look for OptionalStream flag in the hints field of the ISP Output0 > > StreamConfiguration structure. If this flag is not set, it guarantees that the > > application will provide buffers for the ISP, do not allocate any internal > > buffers for the device. > > > > Signed-off-by: Naushir Patuck <naush@raspberrypi.com> > > --- > > .../pipeline/raspberrypi/raspberrypi.cpp | 29 ++++++++++++++----- > > 1 file changed, 22 insertions(+), 7 deletions(-) > > > > diff --git a/src/libcamera/pipeline/raspberrypi/raspberrypi.cpp b/src/libcamera/pipeline/raspberrypi/raspberrypi.cpp > > index 2b396f1db9b6..13d0ab4c4968 100644 > > --- a/src/libcamera/pipeline/raspberrypi/raspberrypi.cpp > > +++ b/src/libcamera/pipeline/raspberrypi/raspberrypi.cpp > > @@ -1453,7 +1453,7 @@ int PipelineHandlerRPi::prepareBuffers(Camera *camera) > > RPiCameraData *data = cameraData(camera); > > unsigned int minUnicamBuffers = data->config_.minUnicamBuffers, > > minTotalUnicamBuffers = data->config_.minTotalUnicamBuffers, > > - numRawBuffers = 0; > > + numRawBuffers = 0, minIspBuffers = 1; > > One variable per line. Ack. > > > int ret; > > > > for (Stream *s : camera->streams()) { > > @@ -1477,8 +1477,21 @@ int PipelineHandlerRPi::prepareBuffers(Camera *camera) > > minTotalUnicamBuffers = 0; > > } > > } > > - > > - break; > > + } else if (s == &data->isp_[Isp::Output0]) { > > + /* > > + * Since the ISP runs synchronous with the IPA and requests, > > + * we only ever need a maximum of one internal buffer. Any > > + * buffers the application wants to hold onto will already > > + * be exported through PipelineHandlerRPi::exportFrameBuffers(). > > + * > > + * However, as above, if the application provides a guarantee > > + * that the buffer will always be provided for the ISP Output0 > > + * stream in a Request, we don't need any internal buffers > > + * allocated. > > + */ > > + if (!(s->configuration().hints & StreamConfiguration::Hint::OptionalStream) && > > + !data->dropFrameCount_) > > + minIspBuffers = 0; > > } > > } > > > > @@ -1514,12 +1527,14 @@ int PipelineHandlerRPi::prepareBuffers(Camera *camera) > > * so allocate the minimum required to avoid frame drops. > > */ > > numBuffers = data->config_.minTotalUnicamBuffers; > > + } else if (stream == &data->isp_[Isp::Output0]) { > > + /* Buffer count for this is handled in the earlier loop above. */ > > + numBuffers = minIspBuffers; > > } else { > > /* > > - * Since the ISP runs synchronous with the IPA and requests, > > - * we only ever need one set of internal buffers. Any buffers > > - * the application wants to hold onto will already be exported > > - * through PipelineHandlerRPi::exportFrameBuffers(). > > + * Same reasoning as for ISP Output 0, we only ever need > > + * a maximum of one internal buffer for Output1 (required > > + * for colour denoise) and ISP statistics. > > */ > > numBuffers = 1; > > Do you plan to also optimize the buffer allocation based on hints for > Output1 ? No, I'll leave Output1 as-is. It's only ever one extra (much lower resolution) frame buffer. It is also best to keep it around as we use it for colour denoise analysis internally. Regards, Naush > > > } > > -- > Regards, > > Laurent Pinchart
diff --git a/src/libcamera/pipeline/raspberrypi/raspberrypi.cpp b/src/libcamera/pipeline/raspberrypi/raspberrypi.cpp index 2b396f1db9b6..13d0ab4c4968 100644 --- a/src/libcamera/pipeline/raspberrypi/raspberrypi.cpp +++ b/src/libcamera/pipeline/raspberrypi/raspberrypi.cpp @@ -1453,7 +1453,7 @@ int PipelineHandlerRPi::prepareBuffers(Camera *camera) RPiCameraData *data = cameraData(camera); unsigned int minUnicamBuffers = data->config_.minUnicamBuffers, minTotalUnicamBuffers = data->config_.minTotalUnicamBuffers, - numRawBuffers = 0; + numRawBuffers = 0, minIspBuffers = 1; int ret; for (Stream *s : camera->streams()) { @@ -1477,8 +1477,21 @@ int PipelineHandlerRPi::prepareBuffers(Camera *camera) minTotalUnicamBuffers = 0; } } - - break; + } else if (s == &data->isp_[Isp::Output0]) { + /* + * Since the ISP runs synchronous with the IPA and requests, + * we only ever need a maximum of one internal buffer. Any + * buffers the application wants to hold onto will already + * be exported through PipelineHandlerRPi::exportFrameBuffers(). + * + * However, as above, if the application provides a guarantee + * that the buffer will always be provided for the ISP Output0 + * stream in a Request, we don't need any internal buffers + * allocated. + */ + if (!(s->configuration().hints & StreamConfiguration::Hint::OptionalStream) && + !data->dropFrameCount_) + minIspBuffers = 0; } } @@ -1514,12 +1527,14 @@ int PipelineHandlerRPi::prepareBuffers(Camera *camera) * so allocate the minimum required to avoid frame drops. */ numBuffers = data->config_.minTotalUnicamBuffers; + } else if (stream == &data->isp_[Isp::Output0]) { + /* Buffer count for this is handled in the earlier loop above. */ + numBuffers = minIspBuffers; } else { /* - * Since the ISP runs synchronous with the IPA and requests, - * we only ever need one set of internal buffers. Any buffers - * the application wants to hold onto will already be exported - * through PipelineHandlerRPi::exportFrameBuffers(). + * Same reasoning as for ISP Output 0, we only ever need + * a maximum of one internal buffer for Output1 (required + * for colour denoise) and ISP statistics. */ numBuffers = 1; }
Look for OptionalStream flag in the hints field of the ISP Output0 StreamConfiguration structure. If this flag is not set, it guarantees that the application will provide buffers for the ISP, do not allocate any internal buffers for the device. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> --- .../pipeline/raspberrypi/raspberrypi.cpp | 29 ++++++++++++++----- 1 file changed, 22 insertions(+), 7 deletions(-)