new file mode 100644
@@ -0,0 +1,139 @@
+/* SPDX-License-Identifier: LGPL-2.1-or-later */
+/*
+ * Copyright (C) 2024, Red Hat Inc.
+ *
+ * Exposure and gain
+ */
+
+#include "agc.h"
+
+#include <stdint.h>
+
+#include <libcamera/base/log.h>
+
+namespace libcamera {
+
+LOG_DEFINE_CATEGORY(IPASoftExposure)
+
+namespace ipa::soft::algorithms {
+
+/*
+ * The number of bins to use for the optimal exposure calculations.
+ */
+static constexpr unsigned int kExposureBinsCount = 5;
+
+/*
+ * The exposure is optimal when the mean sample value of the histogram is
+ * in the middle of the range.
+ */
+static constexpr float kExposureOptimal = kExposureBinsCount / 2.0;
+
+/*
+ * The below value implements the hysteresis for the exposure adjustment.
+ * It is small enough to have the exposure close to the optimal, and is big
+ * enough to prevent the exposure from wobbling around the optimal value.
+ */
+static constexpr float kExposureSatisfactory = 0.2;
+
+Agc::Agc()
+{
+}
+
+void Agc::updateExposure(IPAContext &context, double exposureMSV)
+{
+ /*
+ * kExpDenominator of 10 gives ~10% increment/decrement;
+ * kExpDenominator of 5 - about ~20%
+ */
+ static constexpr uint8_t kExpDenominator = 10;
+ static constexpr uint8_t kExpNumeratorUp = kExpDenominator + 1;
+ static constexpr uint8_t kExpNumeratorDown = kExpDenominator - 1;
+
+ double next;
+ int32_t &exposure = context.activeState.agc.exposure;
+ double &again = context.activeState.agc.again;
+
+ if (exposureMSV < kExposureOptimal - kExposureSatisfactory) {
+ next = exposure * kExpNumeratorUp / kExpDenominator;
+ if (next - exposure < 1)
+ exposure += 1;
+ else
+ exposure = next;
+ if (exposure >= context.configuration.agc.exposureMax) {
+ next = again * kExpNumeratorUp / kExpDenominator;
+ if (next - again < context.configuration.agc.againMinStep)
+ again += context.configuration.agc.againMinStep;
+ else
+ again = next;
+ }
+ }
+
+ if (exposureMSV > kExposureOptimal + kExposureSatisfactory) {
+ if (exposure == context.configuration.agc.exposureMax &&
+ again > context.configuration.agc.againMin) {
+ next = again * kExpNumeratorDown / kExpDenominator;
+ if (again - next < context.configuration.agc.againMinStep)
+ again -= context.configuration.agc.againMinStep;
+ else
+ again = next;
+ } else {
+ next = exposure * kExpNumeratorDown / kExpDenominator;
+ if (exposure - next < 1)
+ exposure -= 1;
+ else
+ exposure = next;
+ }
+ }
+
+ exposure = std::clamp(exposure, context.configuration.agc.exposureMin,
+ context.configuration.agc.exposureMax);
+ again = std::clamp(again, context.configuration.agc.againMin,
+ context.configuration.agc.againMax);
+
+ LOG(IPASoftExposure, Debug)
+ << "exposureMSV " << exposureMSV
+ << " exp " << exposure << " again " << again;
+}
+
+void Agc::process(IPAContext &context,
+ [[maybe_unused]] const uint32_t frame,
+ [[maybe_unused]] IPAFrameContext &frameContext,
+ const SwIspStats *stats,
+ [[maybe_unused]] ControlList &metadata)
+{
+ /*
+ * Calculate Mean Sample Value (MSV) according to formula from:
+ * https://www.araa.asn.au/acra/acra2007/papers/paper84final.pdf
+ */
+ const auto &histogram = stats->yHistogram;
+ const unsigned int blackLevelHistIdx =
+ context.activeState.blc.level / (256 / SwIspStats::kYHistogramSize);
+ const unsigned int histogramSize =
+ SwIspStats::kYHistogramSize - blackLevelHistIdx;
+ const unsigned int yHistValsPerBin = histogramSize / kExposureBinsCount;
+ const unsigned int yHistValsPerBinMod =
+ histogramSize / (histogramSize % kExposureBinsCount + 1);
+ int exposureBins[kExposureBinsCount] = {};
+ unsigned int denom = 0;
+ unsigned int num = 0;
+
+ for (unsigned int i = 0; i < histogramSize; i++) {
+ unsigned int idx = (i - (i / yHistValsPerBinMod)) / yHistValsPerBin;
+ exposureBins[idx] += histogram[blackLevelHistIdx + i];
+ }
+
+ for (unsigned int i = 0; i < kExposureBinsCount; i++) {
+ LOG(IPASoftExposure, Debug) << i << ": " << exposureBins[i];
+ denom += exposureBins[i];
+ num += exposureBins[i] * (i + 1);
+ }
+
+ float exposureMSV = (denom == 0 ? 0 : static_cast<float>(num) / denom);
+ updateExposure(context, exposureMSV);
+}
+
+REGISTER_IPA_ALGORITHM(Agc, "Agc")
+
+} /* namespace ipa::soft::algorithms */
+
+} /* namespace libcamera */
new file mode 100644
@@ -0,0 +1,33 @@
+/* SPDX-License-Identifier: LGPL-2.1-or-later */
+/*
+ * Copyright (C) 2024, Red Hat Inc.
+ *
+ * Exposure and gain
+ */
+
+#pragma once
+
+#include "algorithm.h"
+
+namespace libcamera {
+
+namespace ipa::soft::algorithms {
+
+class Agc : public Algorithm
+{
+public:
+ Agc();
+ ~Agc() = default;
+
+ void process(IPAContext &context, const uint32_t frame,
+ IPAFrameContext &frameContext,
+ const SwIspStats *stats,
+ ControlList &metadata) override;
+
+private:
+ void updateExposure(IPAContext &context, double exposureMSV);
+};
+
+} /* namespace ipa::soft::algorithms */
+
+} /* namespace libcamera */
@@ -2,6 +2,7 @@
soft_simple_ipa_algorithms = files([
'awb.cpp',
+ 'agc.cpp',
'blc.cpp',
'lut.cpp',
])
@@ -6,4 +6,5 @@ algorithms:
- BlackLevel:
- Awb:
- Lut:
+ - Agc:
...
@@ -77,6 +77,17 @@ namespace libcamera::ipa::soft {
* \brief Gain of blue color
*/
+/**
+ * \var IPAActiveState::agc
+ * \brief Context for the AGC algorithm
+ *
+ * \var IPAActiveState::agc.exposure
+ * \brief Current exposure value
+ *
+ * \var IPAActiveState::agc.again
+ * \brief Current analog gain value
+ */
+
/**
* \var IPAActiveState::gamma
* \brief Context for gamma in the Colors algorithm
@@ -18,6 +18,10 @@ namespace ipa::soft {
struct IPASessionConfiguration {
float gamma;
+ struct {
+ int32_t exposureMin, exposureMax;
+ double againMin, againMax, againMinStep;
+ } agc;
};
struct IPAActiveState {
@@ -31,6 +35,11 @@ struct IPAActiveState {
double blue;
} gains;
+ struct {
+ int32_t exposure;
+ double again;
+ } agc;
+
static constexpr unsigned int kGammaLookupSize = 1024;
struct {
std::array<double, kGammaLookupSize> gammaTable;
@@ -39,6 +48,10 @@ struct IPAActiveState {
};
struct IPAFrameContext : public FrameContext {
+ struct {
+ uint32_t exposure;
+ double gain;
+ } sensor;
};
struct IPAContext {
@@ -34,23 +34,6 @@ LOG_DEFINE_CATEGORY(IPASoft)
namespace ipa::soft {
-/*
- * The number of bins to use for the optimal exposure calculations.
- */
-static constexpr unsigned int kExposureBinsCount = 5;
-
-/*
- * The exposure is optimal when the mean sample value of the histogram is
- * in the middle of the range.
- */
-static constexpr float kExposureOptimal = kExposureBinsCount / 2.0;
-
-/*
- * The below value implements the hysteresis for the exposure adjustment.
- * It is small enough to have the exposure close to the optimal, and is big
- * enough to prevent the exposure from wobbling around the optimal value.
- */
-static constexpr float kExposureSatisfactory = 0.2;
/* Maximum number of frame contexts to be held */
static constexpr uint32_t kMaxFrameContexts = 16;
@@ -58,8 +41,7 @@ class IPASoftSimple : public ipa::soft::IPASoftInterface, public Module
{
public:
IPASoftSimple()
- : params_(nullptr), stats_(nullptr),
- context_({ {}, {}, { kMaxFrameContexts } })
+ : context_({ {}, {}, { kMaxFrameContexts } })
{
}
@@ -92,11 +74,6 @@ private:
/* Local parameter storage */
struct IPAContext context_;
-
- int32_t exposureMin_, exposureMax_;
- int32_t exposure_;
- double againMin_, againMax_, againMinStep_;
- double again_;
};
IPASoftSimple::~IPASoftSimple()
@@ -207,20 +184,23 @@ int IPASoftSimple::configure(const IPAConfigInfo &configInfo)
const ControlInfo &exposureInfo = sensorInfoMap_.find(V4L2_CID_EXPOSURE)->second;
const ControlInfo &gainInfo = sensorInfoMap_.find(V4L2_CID_ANALOGUE_GAIN)->second;
- exposureMin_ = exposureInfo.min().get<int32_t>();
- exposureMax_ = exposureInfo.max().get<int32_t>();
- if (!exposureMin_) {
+ context_.configuration.agc.exposureMin = exposureInfo.min().get<int32_t>();
+ context_.configuration.agc.exposureMax = exposureInfo.max().get<int32_t>();
+ if (!context_.configuration.agc.exposureMin) {
LOG(IPASoft, Warning) << "Minimum exposure is zero, that can't be linear";
- exposureMin_ = 1;
+ context_.configuration.agc.exposureMin = 1;
}
int32_t againMin = gainInfo.min().get<int32_t>();
int32_t againMax = gainInfo.max().get<int32_t>();
if (camHelper_) {
- againMin_ = camHelper_->gain(againMin);
- againMax_ = camHelper_->gain(againMax);
- againMinStep_ = (againMax_ - againMin_) / 100.0;
+ context_.configuration.agc.againMin = camHelper_->gain(againMin);
+ context_.configuration.agc.againMax = camHelper_->gain(againMax);
+ context_.configuration.agc.againMinStep =
+ (context_.configuration.agc.againMax -
+ context_.configuration.agc.againMin) /
+ 100.0;
} else {
/*
* The camera sensor gain (g) is usually not equal to the value written
@@ -232,13 +212,14 @@ int IPASoftSimple::configure(const IPAConfigInfo &configInfo)
* the AGC algorithm (abrupt near one edge, and very small near the
* other) we limit the range of the gain values used.
*/
- againMax_ = againMax;
+ context_.configuration.agc.againMax = againMax;
if (!againMin) {
LOG(IPASoft, Warning)
<< "Minimum gain is zero, that can't be linear";
- againMin_ = std::min(100, againMin / 2 + againMax / 2);
+ context_.configuration.agc.againMin =
+ std::min(100, againMin / 2 + againMax / 2);
}
- againMinStep_ = 1.0;
+ context_.configuration.agc.againMinStep = 1.0;
}
for (auto const &algo : algorithms()) {
@@ -247,9 +228,12 @@ int IPASoftSimple::configure(const IPAConfigInfo &configInfo)
return ret;
}
- LOG(IPASoft, Info) << "Exposure " << exposureMin_ << "-" << exposureMax_
- << ", gain " << againMin_ << "-" << againMax_
- << " (" << againMinStep_ << ")";
+ LOG(IPASoft, Info)
+ << "Exposure " << context_.configuration.agc.exposureMin << "-"
+ << context_.configuration.agc.exposureMax
+ << ", gain " << context_.configuration.agc.againMin << "-"
+ << context_.configuration.agc.againMax
+ << " (" << context_.configuration.agc.againMinStep << ")";
return 0;
}
@@ -284,6 +268,12 @@ void IPASoftSimple::processStats(const uint32_t frame,
const ControlList &sensorControls)
{
IPAFrameContext &frameContext = context_.frameContexts.get(frame);
+
+ frameContext.sensor.exposure =
+ sensorControls.get(V4L2_CID_EXPOSURE).get<int32_t>();
+ int32_t again = sensorControls.get(V4L2_CID_ANALOGUE_GAIN).get<int32_t>();
+ frameContext.sensor.gain = camHelper_ ? camHelper_->gain(again) : again;
+
/*
* Software ISP currently does not produce any metadata. Use an empty
* ControlList for now.
@@ -294,37 +284,6 @@ void IPASoftSimple::processStats(const uint32_t frame,
for (auto const &algo : algorithms())
algo->process(context_, frame, frameContext, stats_, metadata);
- /* \todo Switch to the libipa/algorithm.h API someday. */
-
- /*
- * Calculate Mean Sample Value (MSV) according to formula from:
- * https://www.araa.asn.au/acra/acra2007/papers/paper84final.pdf
- */
- const uint8_t blackLevel = context_.activeState.blc.level;
- const unsigned int blackLevelHistIdx =
- blackLevel / (256 / SwIspStats::kYHistogramSize);
- const unsigned int histogramSize =
- SwIspStats::kYHistogramSize - blackLevelHistIdx;
- const unsigned int yHistValsPerBin = histogramSize / kExposureBinsCount;
- const unsigned int yHistValsPerBinMod =
- histogramSize / (histogramSize % kExposureBinsCount + 1);
- int exposureBins[kExposureBinsCount] = {};
- unsigned int denom = 0;
- unsigned int num = 0;
-
- for (unsigned int i = 0; i < histogramSize; i++) {
- unsigned int idx = (i - (i / yHistValsPerBinMod)) / yHistValsPerBin;
- exposureBins[idx] += stats_->yHistogram[blackLevelHistIdx + i];
- }
-
- for (unsigned int i = 0; i < kExposureBinsCount; i++) {
- LOG(IPASoft, Debug) << i << ": " << exposureBins[i];
- denom += exposureBins[i];
- num += exposureBins[i] * (i + 1);
- }
-
- float exposureMSV = static_cast<float>(num) / denom;
-
/* Sanity check */
if (!sensorControls.contains(V4L2_CID_EXPOSURE) ||
!sensorControls.contains(V4L2_CID_ANALOGUE_GAIN)) {
@@ -332,70 +291,14 @@ void IPASoftSimple::processStats(const uint32_t frame,
return;
}
- exposure_ = sensorControls.get(V4L2_CID_EXPOSURE).get<int32_t>();
- int32_t again = sensorControls.get(V4L2_CID_ANALOGUE_GAIN).get<int32_t>();
- again_ = camHelper_ ? camHelper_->gain(again) : again;
-
- updateExposure(exposureMSV);
-
ControlList ctrls(sensorInfoMap_);
- ctrls.set(V4L2_CID_EXPOSURE, exposure_);
+ auto &againNew = context_.activeState.agc.again;
+ ctrls.set(V4L2_CID_EXPOSURE, context_.activeState.agc.exposure);
ctrls.set(V4L2_CID_ANALOGUE_GAIN,
- static_cast<int32_t>(camHelper_ ? camHelper_->gainCode(again_) : again_));
+ static_cast<int32_t>(camHelper_ ? camHelper_->gainCode(againNew) : againNew));
setSensorControls.emit(ctrls);
-
- LOG(IPASoft, Debug) << "exposureMSV " << exposureMSV
- << " exp " << exposure_ << " again " << again_
- << " black level " << static_cast<unsigned int>(blackLevel);
-}
-
-void IPASoftSimple::updateExposure(double exposureMSV)
-{
- /*
- * kExpDenominator of 10 gives ~10% increment/decrement;
- * kExpDenominator of 5 - about ~20%
- */
- static constexpr uint8_t kExpDenominator = 10;
- static constexpr uint8_t kExpNumeratorUp = kExpDenominator + 1;
- static constexpr uint8_t kExpNumeratorDown = kExpDenominator - 1;
-
- double next;
-
- if (exposureMSV < kExposureOptimal - kExposureSatisfactory) {
- next = exposure_ * kExpNumeratorUp / kExpDenominator;
- if (next - exposure_ < 1)
- exposure_ += 1;
- else
- exposure_ = next;
- if (exposure_ >= exposureMax_) {
- next = again_ * kExpNumeratorUp / kExpDenominator;
- if (next - again_ < againMinStep_)
- again_ += againMinStep_;
- else
- again_ = next;
- }
- }
-
- if (exposureMSV > kExposureOptimal + kExposureSatisfactory) {
- if (exposure_ == exposureMax_ && again_ > againMin_) {
- next = again_ * kExpNumeratorDown / kExpDenominator;
- if (again_ - next < againMinStep_)
- again_ -= againMinStep_;
- else
- again_ = next;
- } else {
- next = exposure_ * kExpNumeratorDown / kExpDenominator;
- if (exposure_ - next < 1)
- exposure_ -= 1;
- else
- exposure_ = next;
- }
- }
-
- exposure_ = std::clamp(exposure_, exposureMin_, exposureMax_);
- again_ = std::clamp(again_, againMin_, againMax_);
}
std::string IPASoftSimple::logPrefix() const
@@ -199,16 +199,6 @@ Yes, because, well... all the other IPAs were doing that...
---
-10. Switch to libipa/algorithm.h API in processStats
-
->> void IPASoftSimple::processStats(const ControlList &sensorControls)
->>
-> Do you envision switching to the libipa/algorithm.h API at some point ?
-
-At some point, yes.
-
----
-
13. Improve black level and colour gains application
I think the black level should eventually be moved before debayering, and