@@ -26,12 +26,6 @@ ${controls}
extern const ControlIdMap controls;
-namespace draft {
-
-${draft_controls}
-
-} /* namespace draft */
-
${vendor_controls}
} /* namespace controls */
@@ -34,10 +34,12 @@ libcamera_headers_install_dir = get_option('includedir') / libcamera_include_dir
controls_map = {
'controls': {
+ 'draft': 'control_ids_draft.yaml',
'core': 'control_ids_core.yaml',
},
'properties': {
+ 'draft': 'property_ids_draft.yaml',
'core': 'property_ids_core.yaml',
}
}
@@ -23,12 +23,6 @@ ${ids}
${controls}
-namespace draft {
-
-${draft_controls}
-
-} /* namespace draft */
-
extern const ControlIdMap properties;
${vendor_controls}
@@ -1024,7 +1024,7 @@ void IpaBase::applyControls(const ControlList &controls)
break;
}
- case controls::NOISE_REDUCTION_MODE:
+ case controls::draft::NOISE_REDUCTION_MODE:
/* Handled below in handleControls() */
libcameraMetadata_.set(controls::draft::NoiseReductionMode,
ctrl.second.get<int32_t>());
@@ -260,7 +260,7 @@ void IpaVc4::handleControls(const ControlList &controls)
for (auto const &ctrl : controls) {
switch (ctrl.first) {
- case controls::NOISE_REDUCTION_MODE: {
+ case controls::draft::NOISE_REDUCTION_MODE: {
RPiController::DenoiseAlgorithm *sdn = dynamic_cast<RPiController::DenoiseAlgorithm *>(
controller_.getAlgorithm("SDN"));
/* Some platforms may have a combined "denoise" algorithm instead. */
@@ -24,15 +24,6 @@ namespace controls {
${controls_doc}
-/**
- * \brief Namespace for libcamera draft controls
- */
-namespace draft {
-
-${draft_controls_doc}
-
-} /* namespace draft */
-
${vendor_controls_doc}
#ifndef __DOXYGEN__
@@ -42,12 +33,6 @@ ${vendor_controls_doc}
*/
${controls_def}
-namespace draft {
-
-${draft_controls_def}
-
-} /* namespace draft */
-
${vendor_controls_def}
#endif
@@ -865,236 +865,4 @@ controls:
description: |
This is a long exposure image.
- # ----------------------------------------------------------------------------
- # Draft controls section
-
- - AePrecaptureTrigger:
- type: int32_t
- draft: true
- description: |
- Control for AE metering trigger. Currently identical to
- ANDROID_CONTROL_AE_PRECAPTURE_TRIGGER.
-
- Whether the camera device will trigger a precapture metering sequence
- when it processes this request.
- enum:
- - name: AePrecaptureTriggerIdle
- value: 0
- description: The trigger is idle.
- - name: AePrecaptureTriggerStart
- value: 1
- description: The pre-capture AE metering is started by the camera.
- - name: AePrecaptureTriggerCancel
- value: 2
- description: |
- The camera will cancel any active or completed metering sequence.
- The AE algorithm is reset to its initial state.
-
- - NoiseReductionMode:
- type: int32_t
- draft: true
- description: |
- Control to select the noise reduction algorithm mode. Currently
- identical to ANDROID_NOISE_REDUCTION_MODE.
-
- Mode of operation for the noise reduction algorithm.
- enum:
- - name: NoiseReductionModeOff
- value: 0
- description: No noise reduction is applied
- - name: NoiseReductionModeFast
- value: 1
- description: |
- Noise reduction is applied without reducing the frame rate.
- - name: NoiseReductionModeHighQuality
- value: 2
- description: |
- High quality noise reduction at the expense of frame rate.
- - name: NoiseReductionModeMinimal
- value: 3
- description: |
- Minimal noise reduction is applied without reducing the frame rate.
- - name: NoiseReductionModeZSL
- value: 4
- description: |
- Noise reduction is applied at different levels to different streams.
-
- - ColorCorrectionAberrationMode:
- type: int32_t
- draft: true
- description: |
- Control to select the color correction aberration mode. Currently
- identical to ANDROID_COLOR_CORRECTION_ABERRATION_MODE.
-
- Mode of operation for the chromatic aberration correction algorithm.
- enum:
- - name: ColorCorrectionAberrationOff
- value: 0
- description: No aberration correction is applied.
- - name: ColorCorrectionAberrationFast
- value: 1
- description: Aberration correction will not slow down the frame rate.
- - name: ColorCorrectionAberrationHighQuality
- value: 2
- description: |
- High quality aberration correction which might reduce the frame
- rate.
-
- - AeState:
- type: int32_t
- draft: true
- description: |
- Control to report the current AE algorithm state. Currently identical to
- ANDROID_CONTROL_AE_STATE.
-
- Current state of the AE algorithm.
- enum:
- - name: AeStateInactive
- value: 0
- description: The AE algorithm is inactive.
- - name: AeStateSearching
- value: 1
- description: The AE algorithm has not converged yet.
- - name: AeStateConverged
- value: 2
- description: The AE algorithm has converged.
- - name: AeStateLocked
- value: 3
- description: The AE algorithm is locked.
- - name: AeStateFlashRequired
- value: 4
- description: The AE algorithm would need a flash for good results
- - name: AeStatePrecapture
- value: 5
- description: |
- The AE algorithm has started a pre-capture metering session.
- \sa AePrecaptureTrigger
-
- - AwbState:
- type: int32_t
- draft: true
- description: |
- Control to report the current AWB algorithm state. Currently identical
- to ANDROID_CONTROL_AWB_STATE.
-
- Current state of the AWB algorithm.
- enum:
- - name: AwbStateInactive
- value: 0
- description: The AWB algorithm is inactive.
- - name: AwbStateSearching
- value: 1
- description: The AWB algorithm has not converged yet.
- - name: AwbConverged
- value: 2
- description: The AWB algorithm has converged.
- - name: AwbLocked
- value: 3
- description: The AWB algorithm is locked.
-
- - SensorRollingShutterSkew:
- type: int64_t
- draft: true
- description: |
- Control to report the time between the start of exposure of the first
- row and the start of exposure of the last row. Currently identical to
- ANDROID_SENSOR_ROLLING_SHUTTER_SKEW
-
- - LensShadingMapMode:
- type: int32_t
- draft: true
- description: |
- Control to report if the lens shading map is available. Currently
- identical to ANDROID_STATISTICS_LENS_SHADING_MAP_MODE.
- enum:
- - name: LensShadingMapModeOff
- value: 0
- description: No lens shading map mode is available.
- - name: LensShadingMapModeOn
- value: 1
- description: The lens shading map mode is available.
-
- - PipelineDepth:
- type: int32_t
- draft: true
- description: |
- Specifies the number of pipeline stages the frame went through from when
- it was exposed to when the final completed result was available to the
- framework. Always less than or equal to PipelineMaxDepth. Currently
- identical to ANDROID_REQUEST_PIPELINE_DEPTH.
-
- The typical value for this control is 3 as a frame is first exposed,
- captured and then processed in a single pass through the ISP. Any
- additional processing step performed after the ISP pass (in example face
- detection, additional format conversions etc) count as an additional
- pipeline stage.
-
- - MaxLatency:
- type: int32_t
- draft: true
- description: |
- The maximum number of frames that can occur after a request (different
- than the previous) has been submitted, and before the result's state
- becomes synchronized. A value of -1 indicates unknown latency, and 0
- indicates per-frame control. Currently identical to
- ANDROID_SYNC_MAX_LATENCY.
-
- - TestPatternMode:
- type: int32_t
- draft: true
- description: |
- Control to select the test pattern mode. Currently identical to
- ANDROID_SENSOR_TEST_PATTERN_MODE.
- enum:
- - name: TestPatternModeOff
- value: 0
- description: |
- No test pattern mode is used. The camera device returns frames from
- the image sensor.
- - name: TestPatternModeSolidColor
- value: 1
- description: |
- Each pixel in [R, G_even, G_odd, B] is replaced by its respective
- color channel provided in test pattern data.
- \todo Add control for test pattern data.
- - name: TestPatternModeColorBars
- value: 2
- description: |
- All pixel data is replaced with an 8-bar color pattern. The vertical
- bars (left-to-right) are as follows; white, yellow, cyan, green,
- magenta, red, blue and black. Each bar should take up 1/8 of the
- sensor pixel array width. When this is not possible, the bar size
- should be rounded down to the nearest integer and the pattern can
- repeat on the right side. Each bar's height must always take up the
- full sensor pixel array height.
- - name: TestPatternModeColorBarsFadeToGray
- value: 3
- description: |
- The test pattern is similar to TestPatternModeColorBars,
- except that each bar should start at its specified color at the top
- and fade to gray at the bottom. Furthermore each bar is further
- subdevided into a left and right half. The left half should have a
- smooth gradient, and the right half should have a quantized
- gradient. In particular, the right half's should consist of blocks
- of the same color for 1/16th active sensor pixel array width. The
- least significant bits in the quantized gradient should be copied
- from the most significant bits of the smooth gradient. The height of
- each bar should always be a multiple of 128. When this is not the
- case, the pattern should repeat at the bottom of the image.
- - name: TestPatternModePn9
- value: 4
- description: |
- All pixel data is replaced by a pseudo-random sequence generated
- from a PN9 512-bit sequence (typically implemented in hardware with
- a linear feedback shift register). The generator should be reset at
- the beginning of each frame, and thus each subsequent raw frame with
- this test pattern should be exactly the same as the last.
- - name: TestPatternModeCustom1
- value: 256
- description: |
- The first custom test pattern. All custom patterns that are
- available only on this camera device are at least this numeric
- value. All of the custom test patterns will be static (that is the
- raw image must not vary from frame to frame).
-
...
new file mode 100644
@@ -0,0 +1,230 @@
+# SPDX-License-Identifier: LGPL-2.1-or-later
+#
+# Copyright (C) 2019, Google Inc.
+#
+%YAML 1.1
+---
+# Unless otherwise stated, all controls are bi-directional, i.e. they can be
+# set through Request::controls() and returned out through Request::metadata().
+vendor: draft
+controls:
+ - AePrecaptureTrigger:
+ type: int32_t
+ description: |
+ Control for AE metering trigger. Currently identical to
+ ANDROID_CONTROL_AE_PRECAPTURE_TRIGGER.
+
+ Whether the camera device will trigger a precapture metering sequence
+ when it processes this request.
+ enum:
+ - name: AePrecaptureTriggerIdle
+ value: 0
+ description: The trigger is idle.
+ - name: AePrecaptureTriggerStart
+ value: 1
+ description: The pre-capture AE metering is started by the camera.
+ - name: AePrecaptureTriggerCancel
+ value: 2
+ description: |
+ The camera will cancel any active or completed metering sequence.
+ The AE algorithm is reset to its initial state.
+
+ - NoiseReductionMode:
+ type: int32_t
+ description: |
+ Control to select the noise reduction algorithm mode. Currently
+ identical to ANDROID_NOISE_REDUCTION_MODE.
+
+ Mode of operation for the noise reduction algorithm.
+ enum:
+ - name: NoiseReductionModeOff
+ value: 0
+ description: No noise reduction is applied
+ - name: NoiseReductionModeFast
+ value: 1
+ description: |
+ Noise reduction is applied without reducing the frame rate.
+ - name: NoiseReductionModeHighQuality
+ value: 2
+ description: |
+ High quality noise reduction at the expense of frame rate.
+ - name: NoiseReductionModeMinimal
+ value: 3
+ description: |
+ Minimal noise reduction is applied without reducing the frame rate.
+ - name: NoiseReductionModeZSL
+ value: 4
+ description: |
+ Noise reduction is applied at different levels to different streams.
+
+ - ColorCorrectionAberrationMode:
+ type: int32_t
+ description: |
+ Control to select the color correction aberration mode. Currently
+ identical to ANDROID_COLOR_CORRECTION_ABERRATION_MODE.
+
+ Mode of operation for the chromatic aberration correction algorithm.
+ enum:
+ - name: ColorCorrectionAberrationOff
+ value: 0
+ description: No aberration correction is applied.
+ - name: ColorCorrectionAberrationFast
+ value: 1
+ description: Aberration correction will not slow down the frame rate.
+ - name: ColorCorrectionAberrationHighQuality
+ value: 2
+ description: |
+ High quality aberration correction which might reduce the frame
+ rate.
+
+ - AeState:
+ type: int32_t
+ description: |
+ Control to report the current AE algorithm state. Currently identical to
+ ANDROID_CONTROL_AE_STATE.
+
+ Current state of the AE algorithm.
+ enum:
+ - name: AeStateInactive
+ value: 0
+ description: The AE algorithm is inactive.
+ - name: AeStateSearching
+ value: 1
+ description: The AE algorithm has not converged yet.
+ - name: AeStateConverged
+ value: 2
+ description: The AE algorithm has converged.
+ - name: AeStateLocked
+ value: 3
+ description: The AE algorithm is locked.
+ - name: AeStateFlashRequired
+ value: 4
+ description: The AE algorithm would need a flash for good results
+ - name: AeStatePrecapture
+ value: 5
+ description: |
+ The AE algorithm has started a pre-capture metering session.
+ \sa AePrecaptureTrigger
+
+ - AwbState:
+ type: int32_t
+ description: |
+ Control to report the current AWB algorithm state. Currently identical
+ to ANDROID_CONTROL_AWB_STATE.
+
+ Current state of the AWB algorithm.
+ enum:
+ - name: AwbStateInactive
+ value: 0
+ description: The AWB algorithm is inactive.
+ - name: AwbStateSearching
+ value: 1
+ description: The AWB algorithm has not converged yet.
+ - name: AwbConverged
+ value: 2
+ description: The AWB algorithm has converged.
+ - name: AwbLocked
+ value: 3
+ description: The AWB algorithm is locked.
+
+ - SensorRollingShutterSkew:
+ type: int64_t
+ description: |
+ Control to report the time between the start of exposure of the first
+ row and the start of exposure of the last row. Currently identical to
+ ANDROID_SENSOR_ROLLING_SHUTTER_SKEW
+
+ - LensShadingMapMode:
+ type: int32_t
+ description: |
+ Control to report if the lens shading map is available. Currently
+ identical to ANDROID_STATISTICS_LENS_SHADING_MAP_MODE.
+ enum:
+ - name: LensShadingMapModeOff
+ value: 0
+ description: No lens shading map mode is available.
+ - name: LensShadingMapModeOn
+ value: 1
+ description: The lens shading map mode is available.
+
+ - PipelineDepth:
+ type: int32_t
+ description: |
+ Specifies the number of pipeline stages the frame went through from when
+ it was exposed to when the final completed result was available to the
+ framework. Always less than or equal to PipelineMaxDepth. Currently
+ identical to ANDROID_REQUEST_PIPELINE_DEPTH.
+
+ The typical value for this control is 3 as a frame is first exposed,
+ captured and then processed in a single pass through the ISP. Any
+ additional processing step performed after the ISP pass (in example face
+ detection, additional format conversions etc) count as an additional
+ pipeline stage.
+
+ - MaxLatency:
+ type: int32_t
+ description: |
+ The maximum number of frames that can occur after a request (different
+ than the previous) has been submitted, and before the result's state
+ becomes synchronized. A value of -1 indicates unknown latency, and 0
+ indicates per-frame control. Currently identical to
+ ANDROID_SYNC_MAX_LATENCY.
+
+ - TestPatternMode:
+ type: int32_t
+ description: |
+ Control to select the test pattern mode. Currently identical to
+ ANDROID_SENSOR_TEST_PATTERN_MODE.
+ enum:
+ - name: TestPatternModeOff
+ value: 0
+ description: |
+ No test pattern mode is used. The camera device returns frames from
+ the image sensor.
+ - name: TestPatternModeSolidColor
+ value: 1
+ description: |
+ Each pixel in [R, G_even, G_odd, B] is replaced by its respective
+ color channel provided in test pattern data.
+ \todo Add control for test pattern data.
+ - name: TestPatternModeColorBars
+ value: 2
+ description: |
+ All pixel data is replaced with an 8-bar color pattern. The vertical
+ bars (left-to-right) are as follows; white, yellow, cyan, green,
+ magenta, red, blue and black. Each bar should take up 1/8 of the
+ sensor pixel array width. When this is not possible, the bar size
+ should be rounded down to the nearest integer and the pattern can
+ repeat on the right side. Each bar's height must always take up the
+ full sensor pixel array height.
+ - name: TestPatternModeColorBarsFadeToGray
+ value: 3
+ description: |
+ The test pattern is similar to TestPatternModeColorBars,
+ except that each bar should start at its specified color at the top
+ and fade to gray at the bottom. Furthermore each bar is further
+ subdevided into a left and right half. The left half should have a
+ smooth gradient, and the right half should have a quantized
+ gradient. In particular, the right half's should consist of blocks
+ of the same color for 1/16th active sensor pixel array width. The
+ least significant bits in the quantized gradient should be copied
+ from the most significant bits of the smooth gradient. The height of
+ each bar should always be a multiple of 128. When this is not the
+ case, the pattern should repeat at the bottom of the image.
+ - name: TestPatternModePn9
+ value: 4
+ description: |
+ All pixel data is replaced by a pseudo-random sequence generated
+ from a PN9 512-bit sequence (typically implemented in hardware with
+ a linear feedback shift register). The generator should be reset at
+ the beginning of each frame, and thus each subsequent raw frame with
+ this test pattern should be exactly the same as the last.
+ - name: TestPatternModeCustom1
+ value: 256
+ description: |
+ The first custom test pattern. All custom patterns that are
+ available only on this camera device are at least this numeric
+ value. All of the custom test patterns will be static (that is the
+ raw image must not vary from frame to frame).
+
+...
@@ -23,15 +23,6 @@ namespace properties {
${controls_doc}
-/**
- * \brief Namespace for libcamera draft properties
- */
-namespace draft {
-
-${draft_controls_doc}
-
-} /* namespace draft */
-
${vendor_controls_doc}
#ifndef __DOXYGEN__
@@ -41,12 +32,6 @@ ${vendor_controls_doc}
*/
${controls_def}
-namespace draft {
-
-${draft_controls_def}
-
-} /* namespace draft */
-
${vendor_controls_def}
#endif
@@ -701,37 +701,4 @@ controls:
Different cameras may report identical devices.
- # ----------------------------------------------------------------------------
- # Draft properties section
-
- - ColorFilterArrangement:
- type: int32_t
- draft: true
- description: |
- The arrangement of color filters on sensor; represents the colors in the
- top-left 2x2 section of the sensor, in reading order. Currently
- identical to ANDROID_SENSOR_INFO_COLOR_FILTER_ARRANGEMENT.
- enum:
- - name: RGGB
- value: 0
- description: RGGB Bayer pattern
- - name: GRBG
- value: 1
- description: GRBG Bayer pattern
- - name: GBRG
- value: 2
- description: GBRG Bayer pattern
- - name: BGGR
- value: 3
- description: BGGR Bayer pattern
- - name: RGB
- value: 4
- description: |
- Sensor is not Bayer; output has 3 16-bit values for each pixel,
- instead of just 1 16-bit value per pixel.
- - name: MONO
- value: 5
- description: |
- Sensor is not Bayer; output consists of a single colour channel.
-
...
new file mode 100644
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: LGPL-2.1-or-later
+#
+# Copyright (C) 2019, Google Inc.
+#
+%YAML 1.1
+---
+vendor: draft
+controls:
+ - ColorFilterArrangement:
+ type: int32_t
+ vendor: draft
+ description: |
+ The arrangement of color filters on sensor; represents the colors in the
+ top-left 2x2 section of the sensor, in reading order. Currently
+ identical to ANDROID_SENSOR_INFO_COLOR_FILTER_ARRANGEMENT.
+ enum:
+ - name: RGGB
+ value: 0
+ description: RGGB Bayer pattern
+ - name: GRBG
+ value: 1
+ description: GRBG Bayer pattern
+ - name: GBRG
+ value: 2
+ description: GBRG Bayer pattern
+ - name: BGGR
+ value: 3
+ description: BGGR Bayer pattern
+ - name: RGB
+ value: 4
+ description: |
+ Sensor is not Bayer; output has 3 16-bit values for each pixel,
+ instead of just 1 16-bit value per pixel.
+ - name: MONO
+ value: 5
+ description: |
+ Sensor is not Bayer; output consists of a single colour channel.
+
+...
@@ -32,14 +32,12 @@ def generate_py(controls, mode):
name, ctrl = ctrls.popitem()
if vendor not in vendors and vendor != 'libcamera':
- vendors_class_def.append('class Py{}Controls\n{{\n}};\n'.format(vendor))
- vendor_defs.append('\tauto {} = py::class_<Py{}Controls>(controls, \"{}\");'.format(vendor, vendor, vendor))
+ vendor_mode_str = f'{vendor.capitalize()}{mode.capitalize()}'
+ vendors_class_def.append('class Py{}\n{{\n}};\n'.format(vendor_mode_str))
+ vendor_defs.append('\tauto {} = py::class_<Py{}>(controls, \"{}\");'.format(vendor, vendor_mode_str, vendor))
vendors.append(vendor)
- if ctrl.get('draft'):
- ns = 'libcamera::{}::draft::'.format(mode)
- container = 'draft'
- elif vendor != 'libcamera':
+ if vendor != 'libcamera':
ns = 'libcamera::{}::{}::'.format(mode, vendor)
container = vendor
else:
@@ -17,16 +17,11 @@ class PyControls
{
};
-class PyDraftControls
-{
-};
-
${vendors_class_def}
void init_py_controls_generated(py::module& m)
{
auto controls = py::class_<PyControls>(m, "controls");
- auto draft = py::class_<PyDraftControls>(controls, "draft");
${vendors_defs}
${controls}
@@ -17,16 +17,11 @@ class PyProperties
{
};
-class PyDraftProperties
-{
-};
-
${vendors_class_def}
void init_py_properties_generated(py::module& m)
{
auto controls = py::class_<PyProperties>(m, "properties");
- auto draft = py::class_<PyDraftProperties>(controls, "draft");
${vendors_defs}
${controls}
@@ -86,11 +86,6 @@ class Control(object):
"""Is the control an enumeration"""
return self.__enum_values is not None
- @property
- def is_draft(self):
- """Is the control a draft control"""
- return self.__data.get('draft') is not None
-
@property
def vendor(self):
"""The vendor string, or None"""
@@ -101,12 +96,6 @@ class Control(object):
"""The control name (CamelCase)"""
return self.__name
- @property
- def q_name(self):
- """The control name, qualified with a namespace"""
- ns = 'draft::' if self.is_draft else ''
- return ns + self.__name
-
@property
def type(self):
typ = self.__data.get('type')
@@ -159,7 +148,7 @@ ${description}
for ctrl in controls:
id_name = snake_case(ctrl.name).upper()
- vendor = 'draft' if ctrl.is_draft else ctrl.vendor
+ vendor = ctrl.vendor
if vendor not in ctrls_doc:
ctrls_doc[vendor] = []
ctrls_def[vendor] = []
@@ -208,7 +197,8 @@ ${description}
target_doc.append(doc_template.substitute(info))
target_def.append(def_template.substitute(info))
- ctrls_map.append('\t{ ' + id_name + ', &' + ctrl.q_name + ' },')
+ vendor_ns = vendor + '::' if vendor != "libcamera" else ''
+ ctrls_map.append('\t{ ' + vendor_ns + id_name + ', &' + vendor_ns + ctrl.name + ' },')
vendor_ctrl_doc_sub = []
vendor_ctrl_template = string.Template('''
@@ -221,18 +211,16 @@ ${vendor_controls_str}
} /* namespace ${vendor} */''')
- for vendor in [v for v in ctrls_doc.keys() if v not in ['libcamera', 'draft']]:
+ for vendor in [v for v in ctrls_doc.keys() if v not in ['libcamera']]:
vendor_ctrl_doc_sub.append(vendor_ctrl_template.substitute({'vendor': vendor, 'vendor_controls_str': '\n\n'.join(ctrls_doc[vendor])}))
vendor_ctrl_def_sub = []
- for vendor in [v for v in ctrls_def.keys() if v not in ['libcamera', 'draft']]:
+ for vendor in [v for v in ctrls_def.keys() if v not in ['libcamera']]:
vendor_ctrl_def_sub.append(vendor_ctrl_template.substitute({'vendor': vendor, 'vendor_controls_str': '\n'.join(ctrls_def[vendor])}))
return {
'controls_doc': '\n\n'.join(ctrls_doc['libcamera']),
'controls_def': '\n'.join(ctrls_def['libcamera']),
- 'draft_controls_doc': '\n\n'.join(ctrls_doc['draft']),
- 'draft_controls_def': '\n\n'.join(ctrls_def['draft']),
'controls_map': '\n'.join(ctrls_map),
'vendor_controls_doc': '\n'.join(vendor_ctrl_doc_sub),
'vendor_controls_def': '\n'.join(vendor_ctrl_def_sub),
@@ -252,7 +240,7 @@ def generate_h(controls, mode, ranges):
for ctrl in controls:
id_name = snake_case(ctrl.name).upper()
- vendor = 'draft' if ctrl.is_draft else ctrl.vendor
+ vendor = ctrl.vendor
if vendor not in ctrls:
if vendor not in ranges.keys():
raise RuntimeError(f'Control id range is not defined for vendor {vendor}')
@@ -260,8 +248,7 @@ def generate_h(controls, mode, ranges):
ids[vendor] = []
ctrls[vendor] = []
- # Core and draft controls use the same ID value
- target_ids = ids['libcamera'] if vendor in ['libcamera', 'draft'] else ids[vendor]
+ target_ids = ids[vendor]
target_ids.append('\t' + id_name + ' = ' + str(id_value[vendor]) + ',')
info = {
@@ -269,11 +256,7 @@ def generate_h(controls, mode, ranges):
'type': ctrl.type,
}
- target_ctrls = ctrls['libcamera']
- if ctrl.is_draft:
- target_ctrls = ctrls['draft']
- elif vendor != 'libcamera':
- target_ctrls = ctrls[vendor]
+ target_ctrls = ctrls[vendor]
if ctrl.is_enum:
target_ctrls.append(enum_template_start.substitute(info))
@@ -312,7 +295,7 @@ ${vendor_controls}
''')
vendor_sub = []
- for vendor in [v for v in ctrls.keys() if v not in ['libcamera', 'draft']]:
+ for vendor in [v for v in ctrls.keys() if v != 'libcamera']:
vendor_sub.append(vendor_template.substitute({'mode': mode.upper(),
'vendor': vendor,
'vendor_def': vendor.upper(),
@@ -322,7 +305,6 @@ ${vendor_controls}
return {
'ids': '\n'.join(ids['libcamera']),
'controls': '\n'.join(ctrls['libcamera']),
- 'draft_controls': '\n'.join(ctrls['draft']),
'vendor_controls': '\n'.join(vendor_sub)
}