Message ID | 20201215101633.21546-1-naush@raspberrypi.com |
---|---|
State | Accepted |
Headers | show |
Series |
|
Related | show |
Hi Naush, On 15/12/2020 10:16, Naushir Patuck wrote: > These specific controls are part of the sensor device, so rename them > appropriately. Sounds reasonable to me. Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> > Signed-off-by: Naushir Patuck <naush@raspberrypi.com> > --- > src/ipa/raspberrypi/raspberrypi.cpp | 14 +++++++------- > 1 file changed, 7 insertions(+), 7 deletions(-) > > diff --git a/src/ipa/raspberrypi/raspberrypi.cpp b/src/ipa/raspberrypi/raspberrypi.cpp > index a7439bad..5f2e07fd 100644 > --- a/src/ipa/raspberrypi/raspberrypi.cpp > +++ b/src/ipa/raspberrypi/raspberrypi.cpp > @@ -113,7 +113,7 @@ private: > > std::map<unsigned int, MappedFrameBuffer> buffers_; > > - ControlInfoMap unicamCtrls_; > + ControlInfoMap sensorCtrls_; > ControlInfoMap ispCtrls_; > ControlList libcameraMetadata_; > > @@ -177,7 +177,7 @@ int IPARPi::start(const IPAOperationData &data, IPAOperationData *result) > /* SwitchMode may supply updated exposure/gain values to use. */ > metadata.Get("agc.status", agcStatus); > if (agcStatus.shutter_time != 0.0 && agcStatus.analogue_gain != 0.0) { > - ControlList ctrls(unicamCtrls_); > + ControlList ctrls(sensorCtrls_); > applyAGC(&agcStatus, ctrls); > result->controls.emplace_back(ctrls); > result->operation |= RPi::IPA_CONFIG_SENSOR; > @@ -287,7 +287,7 @@ void IPARPi::configure(const CameraSensorInfo &sensorInfo, > > result->operation = 0; > > - unicamCtrls_ = entityControls.at(0); > + sensorCtrls_ = entityControls.at(0); > ispCtrls_ = entityControls.at(1); > > /* Setup a metadata ControlList to output metadata. */ > @@ -364,7 +364,7 @@ void IPARPi::configure(const CameraSensorInfo &sensorInfo, > controllerInit_ = true; > > /* Supply initial values for gain and exposure. */ > - ControlList ctrls(unicamCtrls_); > + ControlList ctrls(sensorCtrls_); > AgcStatus agcStatus; > agcStatus.shutter_time = DefaultExposureTime; > agcStatus.analogue_gain = DefaultAnalogueGain; > @@ -879,7 +879,7 @@ void IPARPi::processStats(unsigned int bufferId) > > struct AgcStatus agcStatus; > if (rpiMetadata_.Get("agc.status", agcStatus) == 0) { > - ControlList ctrls(unicamCtrls_); > + ControlList ctrls(sensorCtrls_); > applyAGC(&agcStatus, ctrls); > > IPAOperationData op; > @@ -917,12 +917,12 @@ void IPARPi::applyAGC(const struct AgcStatus *agcStatus, ControlList &ctrls) > int32_t gainCode = helper_->GainCode(agcStatus->analogue_gain); > int32_t exposureLines = helper_->ExposureLines(agcStatus->shutter_time); > > - if (unicamCtrls_.find(V4L2_CID_ANALOGUE_GAIN) == unicamCtrls_.end()) { > + if (sensorCtrls_.find(V4L2_CID_ANALOGUE_GAIN) == sensorCtrls_.end()) { > LOG(IPARPI, Error) << "Can't find analogue gain control"; > return; > } > > - if (unicamCtrls_.find(V4L2_CID_EXPOSURE) == unicamCtrls_.end()) { > + if (sensorCtrls_.find(V4L2_CID_EXPOSURE) == sensorCtrls_.end()) { > LOG(IPARPI, Error) << "Can't find exposure control"; > return; > } >
Hi Naush, Thank you for the patch. On Tue, Dec 15, 2020 at 10:16:32AM +0000, Naushir Patuck wrote: > These specific controls are part of the sensor device, so rename them > appropriately. > > Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > --- > src/ipa/raspberrypi/raspberrypi.cpp | 14 +++++++------- > 1 file changed, 7 insertions(+), 7 deletions(-) > > diff --git a/src/ipa/raspberrypi/raspberrypi.cpp b/src/ipa/raspberrypi/raspberrypi.cpp > index a7439bad..5f2e07fd 100644 > --- a/src/ipa/raspberrypi/raspberrypi.cpp > +++ b/src/ipa/raspberrypi/raspberrypi.cpp > @@ -113,7 +113,7 @@ private: > > std::map<unsigned int, MappedFrameBuffer> buffers_; > > - ControlInfoMap unicamCtrls_; > + ControlInfoMap sensorCtrls_; > ControlInfoMap ispCtrls_; > ControlList libcameraMetadata_; > > @@ -177,7 +177,7 @@ int IPARPi::start(const IPAOperationData &data, IPAOperationData *result) > /* SwitchMode may supply updated exposure/gain values to use. */ > metadata.Get("agc.status", agcStatus); > if (agcStatus.shutter_time != 0.0 && agcStatus.analogue_gain != 0.0) { > - ControlList ctrls(unicamCtrls_); > + ControlList ctrls(sensorCtrls_); > applyAGC(&agcStatus, ctrls); > result->controls.emplace_back(ctrls); > result->operation |= RPi::IPA_CONFIG_SENSOR; > @@ -287,7 +287,7 @@ void IPARPi::configure(const CameraSensorInfo &sensorInfo, > > result->operation = 0; > > - unicamCtrls_ = entityControls.at(0); > + sensorCtrls_ = entityControls.at(0); > ispCtrls_ = entityControls.at(1); > > /* Setup a metadata ControlList to output metadata. */ > @@ -364,7 +364,7 @@ void IPARPi::configure(const CameraSensorInfo &sensorInfo, > controllerInit_ = true; > > /* Supply initial values for gain and exposure. */ > - ControlList ctrls(unicamCtrls_); > + ControlList ctrls(sensorCtrls_); > AgcStatus agcStatus; > agcStatus.shutter_time = DefaultExposureTime; > agcStatus.analogue_gain = DefaultAnalogueGain; > @@ -879,7 +879,7 @@ void IPARPi::processStats(unsigned int bufferId) > > struct AgcStatus agcStatus; > if (rpiMetadata_.Get("agc.status", agcStatus) == 0) { > - ControlList ctrls(unicamCtrls_); > + ControlList ctrls(sensorCtrls_); > applyAGC(&agcStatus, ctrls); > > IPAOperationData op; > @@ -917,12 +917,12 @@ void IPARPi::applyAGC(const struct AgcStatus *agcStatus, ControlList &ctrls) > int32_t gainCode = helper_->GainCode(agcStatus->analogue_gain); > int32_t exposureLines = helper_->ExposureLines(agcStatus->shutter_time); > > - if (unicamCtrls_.find(V4L2_CID_ANALOGUE_GAIN) == unicamCtrls_.end()) { > + if (sensorCtrls_.find(V4L2_CID_ANALOGUE_GAIN) == sensorCtrls_.end()) { > LOG(IPARPI, Error) << "Can't find analogue gain control"; > return; > } > > - if (unicamCtrls_.find(V4L2_CID_EXPOSURE) == unicamCtrls_.end()) { > + if (sensorCtrls_.find(V4L2_CID_EXPOSURE) == sensorCtrls_.end()) { > LOG(IPARPI, Error) << "Can't find exposure control"; > return; > }
diff --git a/src/ipa/raspberrypi/raspberrypi.cpp b/src/ipa/raspberrypi/raspberrypi.cpp index a7439bad..5f2e07fd 100644 --- a/src/ipa/raspberrypi/raspberrypi.cpp +++ b/src/ipa/raspberrypi/raspberrypi.cpp @@ -113,7 +113,7 @@ private: std::map<unsigned int, MappedFrameBuffer> buffers_; - ControlInfoMap unicamCtrls_; + ControlInfoMap sensorCtrls_; ControlInfoMap ispCtrls_; ControlList libcameraMetadata_; @@ -177,7 +177,7 @@ int IPARPi::start(const IPAOperationData &data, IPAOperationData *result) /* SwitchMode may supply updated exposure/gain values to use. */ metadata.Get("agc.status", agcStatus); if (agcStatus.shutter_time != 0.0 && agcStatus.analogue_gain != 0.0) { - ControlList ctrls(unicamCtrls_); + ControlList ctrls(sensorCtrls_); applyAGC(&agcStatus, ctrls); result->controls.emplace_back(ctrls); result->operation |= RPi::IPA_CONFIG_SENSOR; @@ -287,7 +287,7 @@ void IPARPi::configure(const CameraSensorInfo &sensorInfo, result->operation = 0; - unicamCtrls_ = entityControls.at(0); + sensorCtrls_ = entityControls.at(0); ispCtrls_ = entityControls.at(1); /* Setup a metadata ControlList to output metadata. */ @@ -364,7 +364,7 @@ void IPARPi::configure(const CameraSensorInfo &sensorInfo, controllerInit_ = true; /* Supply initial values for gain and exposure. */ - ControlList ctrls(unicamCtrls_); + ControlList ctrls(sensorCtrls_); AgcStatus agcStatus; agcStatus.shutter_time = DefaultExposureTime; agcStatus.analogue_gain = DefaultAnalogueGain; @@ -879,7 +879,7 @@ void IPARPi::processStats(unsigned int bufferId) struct AgcStatus agcStatus; if (rpiMetadata_.Get("agc.status", agcStatus) == 0) { - ControlList ctrls(unicamCtrls_); + ControlList ctrls(sensorCtrls_); applyAGC(&agcStatus, ctrls); IPAOperationData op; @@ -917,12 +917,12 @@ void IPARPi::applyAGC(const struct AgcStatus *agcStatus, ControlList &ctrls) int32_t gainCode = helper_->GainCode(agcStatus->analogue_gain); int32_t exposureLines = helper_->ExposureLines(agcStatus->shutter_time); - if (unicamCtrls_.find(V4L2_CID_ANALOGUE_GAIN) == unicamCtrls_.end()) { + if (sensorCtrls_.find(V4L2_CID_ANALOGUE_GAIN) == sensorCtrls_.end()) { LOG(IPARPI, Error) << "Can't find analogue gain control"; return; } - if (unicamCtrls_.find(V4L2_CID_EXPOSURE) == unicamCtrls_.end()) { + if (sensorCtrls_.find(V4L2_CID_EXPOSURE) == sensorCtrls_.end()) { LOG(IPARPI, Error) << "Can't find exposure control"; return; }
These specific controls are part of the sensor device, so rename them appropriately. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> --- src/ipa/raspberrypi/raspberrypi.cpp | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-)