From patchwork Fri Mar 27 22:35:20 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Jacopo Mondi X-Patchwork-Id: 3360 Return-Path: Received: from relay11.mail.gandi.net (relay11.mail.gandi.net [217.70.178.231]) by lancelot.ideasonboard.com (Postfix) with ESMTPS id 1DC57629C1 for ; Fri, 27 Mar 2020 23:32:36 +0100 (CET) Received: from uno.localdomain (2-224-242-101.ip172.fastwebnet.it [2.224.242.101]) (Authenticated sender: jacopo@jmondi.org) by relay11.mail.gandi.net (Postfix) with ESMTPSA id 7DD6E100007; Fri, 27 Mar 2020 22:32:34 +0000 (UTC) From: Jacopo Mondi To: linux-media@vger.kernel.org, libcamera-devel@lists.libcamera.org Cc: Jacopo Mondi , mchehab@kernel.org, hverkuil-cisco@xs4all.nl, sakari.ailus@linux.intel.com, andrey.konovalov@linaro.org, laurent.pinchart@ideasonboard.com Date: Fri, 27 Mar 2020 23:35:20 +0100 Message-Id: <20200327223522.506832-2-jacopo@jmondi.org> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20200327223522.506832-1-jacopo@jmondi.org> References: <20200327223522.506832-1-jacopo@jmondi.org> MIME-Version: 1.0 Subject: [libcamera-devel] [v2 1/3] Documentation: media: Update sub-device API intro X-BeenThere: libcamera-devel@lists.libcamera.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 27 Mar 2020 22:32:36 -0000 Update the V4L2 sub-device userspace API introduction to provide more details on why complex devices might want to register devnodes for the connected subdevices. Suggested-by: Laurent Pinchart Signed-off-by: Jacopo Mondi --- Documentation/media/kapi/v4l2-subdev.rst | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/Documentation/media/kapi/v4l2-subdev.rst b/Documentation/media/kapi/v4l2-subdev.rst index 29e07e23f888..41ccb3e5c707 100644 --- a/Documentation/media/kapi/v4l2-subdev.rst +++ b/Documentation/media/kapi/v4l2-subdev.rst @@ -275,8 +275,13 @@ system the .unbind() method is called. All three callbacks are optional. V4L2 sub-device userspace API ----------------------------- -Beside exposing a kernel API through the :c:type:`v4l2_subdev_ops` structure, -V4L2 sub-devices can also be controlled directly by userspace applications. +Bridge drivers traditionally expose one or multiple video nodes to userspace, +and control subdevices through the :c:type:`v4l2_subdev_ops` operations in +response to video node operations. This hides the complexity of the underlying +hardware from applications. For complex devices, finer-grained control of the +device than what the video nodes offer may be required. In those cases, bridge +drivers that implement :ref:`the media controller API ` may +opt for making the subdevice operations directly accessible from userpace. Device nodes named ``v4l-subdev``\ *X* can be created in ``/dev`` to access sub-devices directly. If a sub-device supports direct userspace configuration From patchwork Fri Mar 27 22:35:21 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Jacopo Mondi X-Patchwork-Id: 3361 Return-Path: Received: from relay11.mail.gandi.net (relay11.mail.gandi.net [217.70.178.231]) by lancelot.ideasonboard.com (Postfix) with ESMTPS id E2338629C1 for ; Fri, 27 Mar 2020 23:32:37 +0100 (CET) Received: from uno.localdomain (2-224-242-101.ip172.fastwebnet.it [2.224.242.101]) (Authenticated sender: jacopo@jmondi.org) by relay11.mail.gandi.net (Postfix) with ESMTPSA id 4874E100009; Fri, 27 Mar 2020 22:32:36 +0000 (UTC) From: Jacopo Mondi To: linux-media@vger.kernel.org, libcamera-devel@lists.libcamera.org Cc: Jacopo Mondi , mchehab@kernel.org, hverkuil-cisco@xs4all.nl, sakari.ailus@linux.intel.com, andrey.konovalov@linaro.org, laurent.pinchart@ideasonboard.com Date: Fri, 27 Mar 2020 23:35:21 +0100 Message-Id: <20200327223522.506832-3-jacopo@jmondi.org> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20200327223522.506832-1-jacopo@jmondi.org> References: <20200327223522.506832-1-jacopo@jmondi.org> MIME-Version: 1.0 Subject: [libcamera-devel] [v2 2/3] Documentation: media: Document read-only subdevice X-BeenThere: libcamera-devel@lists.libcamera.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 27 Mar 2020 22:32:38 -0000 Document a new kapi function to register subdev device nodes in read only mode and for each affected ioctl report how access is restricted. Signed-off-by: Jacopo Mondi Acked-by: Sakari Ailus --- Documentation/media/kapi/v4l2-subdev.rst | 44 +++++++++++++++++++ Documentation/media/uapi/v4l/dev-subdev.rst | 5 +++ .../media/uapi/v4l/vidioc-g-dv-timings.rst | 6 +++ Documentation/media/uapi/v4l/vidioc-g-std.rst | 6 +++ .../media/uapi/v4l/vidioc-subdev-g-crop.rst | 9 ++++ .../media/uapi/v4l/vidioc-subdev-g-fmt.rst | 8 ++++ .../v4l/vidioc-subdev-g-frame-interval.rst | 8 ++++ .../uapi/v4l/vidioc-subdev-g-selection.rst | 8 ++++ 8 files changed, 94 insertions(+) diff --git a/Documentation/media/kapi/v4l2-subdev.rst b/Documentation/media/kapi/v4l2-subdev.rst index 41ccb3e5c707..6506a673e6a1 100644 --- a/Documentation/media/kapi/v4l2-subdev.rst +++ b/Documentation/media/kapi/v4l2-subdev.rst @@ -332,6 +332,50 @@ Private ioctls All ioctls not in the above list are passed directly to the sub-device driver through the core::ioctl operation. +Read-only sub-device userspace API +---------------------------------- + +Bridge drivers that control their connected subdevices through direct calls to +the kernel API realized by :c:type:`v4l2_subdev_ops` structure do not usually +want userspace to be able to change the same parameters through the subdevice +device node and thus do not usually register any. + +It is sometimes useful to report to userspace the current subdevice +configuration through a read-only API, that does not permit applications to +change to the device parameters but allows interfacing to the subdevice device +node to inspect them. + +For instance, to implement cameras based on computational photography, userspace +needs to know the detailed camera sensor configuration (in terms of skipping, +binning, cropping and scaling) for each supported output resolution. To support +such use cases, bridge drivers may expose the subdevice operations to userspace +through a read-only API. + +To create a read-only device node for all the subdevices registered with the +``V4L2_SUBDEV_FL_HAS_DEVNODE`` set, the :c:type:`v4l2_device` driver should call +:c:func:`v4l2_device_register_ro_subdev_nodes`. + +Access to the following ioctls for userspace applications is restricted on +sub-device device nodes registered with +:c:func:`v4l2_device_register_ro_subdev_nodes`. + +``VIDIOC_SUBDEV_S_FMT``, +``VIDIOC_SUBDEV_S_CROP``, +``VIDIOC_SUBDEV_S_SELECTION``: + + These ioctls are only allowed on a read-only subdevice device node + for the :ref:`V4L2_SUBDEV_FORMAT_TRY ` + formats and selection rectangles. + +``VIDIOC_SUBDEV_S_FRAME_INTERVAL``, +``VIDIOC_SUBDEV_S_DV_TIMINGS``, +``VIDIOC_SUBDEV_S_STD``: + + These ioctls are not allowed on a read-only subdevice node. + +In case the ioclt is not allowed, or the format to modify is set to +``V4L2_SUBDEV_FORMAT_ACTIVE``, the core returns a negative error code and +the errno variable is set to ``-EPERM``. I2C sub-device drivers ---------------------- diff --git a/Documentation/media/uapi/v4l/dev-subdev.rst b/Documentation/media/uapi/v4l/dev-subdev.rst index 029bb2d9928a..6082f9c2f8f4 100644 --- a/Documentation/media/uapi/v4l/dev-subdev.rst +++ b/Documentation/media/uapi/v4l/dev-subdev.rst @@ -39,6 +39,11 @@ will feature a character device node on which ioctls can be called to Sub-device character device nodes, conventionally named ``/dev/v4l-subdev*``, use major number 81. +Drivers may opt to limit the sub-device character devices to only expose +operations that don't modify the device state. In such a case the sub-devices +are referred to as ``read-only`` in the rest of this documentation, and the +related restrictions are documented in individual ioctls. + Controls ======== diff --git a/Documentation/media/uapi/v4l/vidioc-g-dv-timings.rst b/Documentation/media/uapi/v4l/vidioc-g-dv-timings.rst index e36dd2622857..611f94e4510a 100644 --- a/Documentation/media/uapi/v4l/vidioc-g-dv-timings.rst +++ b/Documentation/media/uapi/v4l/vidioc-g-dv-timings.rst @@ -57,6 +57,10 @@ pointer to the struct :c:type:`v4l2_dv_timings` structure as argument. If the ioctl is not supported or the timing values are not correct, the driver returns ``EINVAL`` error code. +Calling ``VIDIOC_SUBDEV_S_DV_TIMINGS`` on a subdev device node that has been +registered in read-only mode is not allowed. An error is returned and the errno +variable is set to ``-EPERM``. + The ``linux/v4l2-dv-timings.h`` header can be used to get the timings of the formats in the :ref:`cea861` and :ref:`vesadmt` standards. If the current input or output does not support DV timings (e.g. if @@ -81,6 +85,8 @@ ENODATA EBUSY The device is busy and therefore can not change the timings. +EPERM + ``VIDIOC_SUBDEV_S_DV_TIMINGS`` has been called on a read-only subdevice. .. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}| diff --git a/Documentation/media/uapi/v4l/vidioc-g-std.rst b/Documentation/media/uapi/v4l/vidioc-g-std.rst index e633e42e3910..e220b38b859f 100644 --- a/Documentation/media/uapi/v4l/vidioc-g-std.rst +++ b/Documentation/media/uapi/v4l/vidioc-g-std.rst @@ -66,6 +66,9 @@ video timings (e.g. if :ref:`VIDIOC_ENUMINPUT` does not set the ``V4L2_IN_CAP_STD`` flag), then ``ENODATA`` error code is returned. +Calling ``VIDIOC_SUBDEV_S_STD`` on a subdev device node that has been registered +in read-only mode is not allowed. An error is returned and the errno variable is +set to ``-EPERM``. Return Value ============ @@ -79,3 +82,6 @@ EINVAL ENODATA Standard video timings are not supported for this input or output. + +EPERM + ``VIDIOC_SUBDEV_S_STD`` has been called on a read-only subdevice. diff --git a/Documentation/media/uapi/v4l/vidioc-subdev-g-crop.rst b/Documentation/media/uapi/v4l/vidioc-subdev-g-crop.rst index 632ee053accc..62f5d9870ca7 100644 --- a/Documentation/media/uapi/v4l/vidioc-subdev-g-crop.rst +++ b/Documentation/media/uapi/v4l/vidioc-subdev-g-crop.rst @@ -73,6 +73,11 @@ crop rectangles and stored in the sub-device file handle. Two applications querying the same sub-device would thus not interact with each other. +If the subdev device node has been registered in read-only mode calls to +``VIDIOC_SUBDEV_S_CROP`` are only valid if the ``which`` field is set to +``V4L2_SUBDEV_FORMAT_TRY``, otherwise an error is returned and the errno +variable is set to ``-EPERM``. + Drivers must not return an error solely because the requested crop rectangle doesn't match the device capabilities. They must instead modify the rectangle to match what the hardware can provide. The @@ -123,3 +128,7 @@ EINVAL references a non-existing pad, the ``which`` field references a non-existing format, or cropping is not supported on the given subdev pad. + +EPERM + The ``VIDIOC_SUBDEV_S_CROP`` ioctl has been called on a read-only subdevice + and the ``which`` field is set to ``V4L2_SUBDEV_FORMAT_ACTIVE``. diff --git a/Documentation/media/uapi/v4l/vidioc-subdev-g-fmt.rst b/Documentation/media/uapi/v4l/vidioc-subdev-g-fmt.rst index 472577bd1745..3a2f64bb00e7 100644 --- a/Documentation/media/uapi/v4l/vidioc-subdev-g-fmt.rst +++ b/Documentation/media/uapi/v4l/vidioc-subdev-g-fmt.rst @@ -78,6 +78,11 @@ current links configuration or sub-device controls value. For instance, a low-pass noise filter might crop pixels at the frame boundaries, modifying its output frame size. +If the subdev device node has been registered in read-only mode calls to +``VIDIOC_SUBDEV_S_FMT`` are only valid if the ``which`` field is set to +``V4L2_SUBDEV_FORMAT_TRY``, otherwise an error is returned and the errno +variable is set to ``-EPERM``. + Drivers must not return an error solely because the requested format doesn't match the device capabilities. They must instead modify the format to match what the hardware can provide. The modified format @@ -146,6 +151,9 @@ EINVAL ``pad`` references a non-existing pad, or the ``which`` field references a non-existing format. +EPERM + The ``VIDIOC_SUBDEV_S_FMT`` ioctl has been called on a read-only subdevice + and the ``which`` field is set to ``V4L2_SUBDEV_FORMAT_ACTIVE``. ============ diff --git a/Documentation/media/uapi/v4l/vidioc-subdev-g-frame-interval.rst b/Documentation/media/uapi/v4l/vidioc-subdev-g-frame-interval.rst index 4b1b4bc78bfe..34aa39096e3d 100644 --- a/Documentation/media/uapi/v4l/vidioc-subdev-g-frame-interval.rst +++ b/Documentation/media/uapi/v4l/vidioc-subdev-g-frame-interval.rst @@ -65,6 +65,10 @@ struct contains the current frame interval as would be returned by a ``VIDIOC_SUBDEV_G_FRAME_INTERVAL`` call. +Calling ``VIDIOC_SUBDEV_S_FRAME_INTERVAL`` on a subdev device node that has been +registered in read-only mode is not allowed. An error is returned and the errno +variable is set to ``-EPERM``. + Drivers must not return an error solely because the requested interval doesn't match the device capabilities. They must instead modify the interval to match what the hardware can provide. The modified interval @@ -118,3 +122,7 @@ EINVAL :c:type:`v4l2_subdev_frame_interval` ``pad`` references a non-existing pad, or the pad doesn't support frame intervals. + +EPERM + The ``VIDIOC_SUBDEV_S_FRAME_INTERVAL`` ioctl has been called on a read-only + subdevice. diff --git a/Documentation/media/uapi/v4l/vidioc-subdev-g-selection.rst b/Documentation/media/uapi/v4l/vidioc-subdev-g-selection.rst index fc73d27e6d74..abd046cef612 100644 --- a/Documentation/media/uapi/v4l/vidioc-subdev-g-selection.rst +++ b/Documentation/media/uapi/v4l/vidioc-subdev-g-selection.rst @@ -53,6 +53,10 @@ function of the crop API, and more, are supported by the selections API. See :ref:`subdev` for more information on how each selection target affects the image processing pipeline inside the subdevice. +If the subdev device node has been registered in read-only mode calls to +``VIDIOC_SUBDEV_S_SELECTION`` are only valid if the ``which`` field is set to +``V4L2_SUBDEV_FORMAT_TRY``, otherwise an error is returned and the errno +variable is set to ``-EPERM``. Types of selection targets -------------------------- @@ -123,3 +127,7 @@ EINVAL ``pad`` references a non-existing pad, the ``which`` field references a non-existing format, or the selection target is not supported on the given subdev pad. + +EPERM + The ``VIDIOC_SUBDEV_S_SELECTION`` ioctl has been called on a read-only + subdevice and the ``which`` field is set to ``V4L2_SUBDEV_FORMAT_ACTIVE``. From patchwork Fri Mar 27 22:35:22 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Jacopo Mondi X-Patchwork-Id: 3362 Return-Path: Received: from relay11.mail.gandi.net (relay11.mail.gandi.net [217.70.178.231]) by lancelot.ideasonboard.com (Postfix) with ESMTPS id BA1436040E for ; Fri, 27 Mar 2020 23:32:39 +0100 (CET) Received: from uno.localdomain (2-224-242-101.ip172.fastwebnet.it [2.224.242.101]) (Authenticated sender: jacopo@jmondi.org) by relay11.mail.gandi.net (Postfix) with ESMTPSA id 1798A10000A; Fri, 27 Mar 2020 22:32:37 +0000 (UTC) From: Jacopo Mondi To: linux-media@vger.kernel.org, libcamera-devel@lists.libcamera.org Cc: Jacopo Mondi , mchehab@kernel.org, hverkuil-cisco@xs4all.nl, sakari.ailus@linux.intel.com, andrey.konovalov@linaro.org, laurent.pinchart@ideasonboard.com Date: Fri, 27 Mar 2020 23:35:22 +0100 Message-Id: <20200327223522.506832-4-jacopo@jmondi.org> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20200327223522.506832-1-jacopo@jmondi.org> References: <20200327223522.506832-1-jacopo@jmondi.org> MIME-Version: 1.0 Subject: [libcamera-devel] [v2 3/3] media: v4l2-dev: Add v4l2_device_register_ro_subdev_node() X-BeenThere: libcamera-devel@lists.libcamera.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 27 Mar 2020 22:32:39 -0000 Add to the V4L2 core a function to register device nodes for video subdevices in read-only mode. Registering a device node in read-only mode is useful to expose to userspace the current sub-device configuration, without allowing application to change it by using the V4L2 subdevice ioctls. Signed-off-by: Jacopo Mondi --- drivers/media/v4l2-core/v4l2-device.c | 7 +++-- drivers/media/v4l2-core/v4l2-subdev.c | 19 ++++++++++++ include/media/v4l2-dev.h | 7 +++++ include/media/v4l2-device.h | 42 ++++++++++++++++++++++++--- 4 files changed, 69 insertions(+), 6 deletions(-) -- 2.25.1 diff --git a/drivers/media/v4l2-core/v4l2-device.c b/drivers/media/v4l2-core/v4l2-device.c index c69941214bb2..4517a70379ce 100644 --- a/drivers/media/v4l2-core/v4l2-device.c +++ b/drivers/media/v4l2-core/v4l2-device.c @@ -186,7 +186,8 @@ static void v4l2_device_release_subdev_node(struct video_device *vdev) kfree(vdev); } -int v4l2_device_register_subdev_nodes(struct v4l2_device *v4l2_dev) +int __v4l2_device_register_subdev_nodes(struct v4l2_device *v4l2_dev, + bool read_only) { struct video_device *vdev; struct v4l2_subdev *sd; @@ -215,6 +216,8 @@ int v4l2_device_register_subdev_nodes(struct v4l2_device *v4l2_dev) vdev->fops = &v4l2_subdev_fops; vdev->release = v4l2_device_release_subdev_node; vdev->ctrl_handler = sd->ctrl_handler; + if (read_only) + set_bit(V4L2_FL_RO_DEVNODE, &vdev->flags); err = __video_register_device(vdev, VFL_TYPE_SUBDEV, -1, 1, sd->owner); if (err < 0) { @@ -252,7 +255,7 @@ int v4l2_device_register_subdev_nodes(struct v4l2_device *v4l2_dev) return err; } -EXPORT_SYMBOL_GPL(v4l2_device_register_subdev_nodes); +EXPORT_SYMBOL_GPL(__v4l2_device_register_subdev_nodes); void v4l2_device_unregister_subdev(struct v4l2_subdev *sd) { diff --git a/drivers/media/v4l2-core/v4l2-subdev.c b/drivers/media/v4l2-core/v4l2-subdev.c index a376b351135f..87fea21919fc 100644 --- a/drivers/media/v4l2-core/v4l2-subdev.c +++ b/drivers/media/v4l2-core/v4l2-subdev.c @@ -331,6 +331,7 @@ static long subdev_do_ioctl(struct file *file, unsigned int cmd, void *arg) struct v4l2_fh *vfh = file->private_data; #if defined(CONFIG_VIDEO_V4L2_SUBDEV_API) struct v4l2_subdev_fh *subdev_fh = to_v4l2_subdev_fh(vfh); + bool ro_subdev = test_bit(V4L2_FL_RO_DEVNODE, &vdev->flags); #endif int rval; @@ -477,6 +478,9 @@ static long subdev_do_ioctl(struct file *file, unsigned int cmd, void *arg) case VIDIOC_SUBDEV_S_FMT: { struct v4l2_subdev_format *format = arg; + if (format->which != V4L2_SUBDEV_FORMAT_TRY && ro_subdev) + return -EPERM; + memset(format->reserved, 0, sizeof(format->reserved)); memset(format->format.reserved, 0, sizeof(format->format.reserved)); return v4l2_subdev_call(sd, pad, set_fmt, subdev_fh->pad, format); @@ -504,6 +508,9 @@ static long subdev_do_ioctl(struct file *file, unsigned int cmd, void *arg) struct v4l2_subdev_crop *crop = arg; struct v4l2_subdev_selection sel; + if (crop->which != V4L2_SUBDEV_FORMAT_TRY && ro_subdev) + return -EPERM; + memset(crop->reserved, 0, sizeof(crop->reserved)); memset(&sel, 0, sizeof(sel)); sel.which = crop->which; @@ -545,6 +552,9 @@ static long subdev_do_ioctl(struct file *file, unsigned int cmd, void *arg) case VIDIOC_SUBDEV_S_FRAME_INTERVAL: { struct v4l2_subdev_frame_interval *fi = arg; + if (ro_subdev) + return -EPERM; + memset(fi->reserved, 0, sizeof(fi->reserved)); return v4l2_subdev_call(sd, video, s_frame_interval, arg); } @@ -568,6 +578,9 @@ static long subdev_do_ioctl(struct file *file, unsigned int cmd, void *arg) case VIDIOC_SUBDEV_S_SELECTION: { struct v4l2_subdev_selection *sel = arg; + if (sel->which != V4L2_SUBDEV_FORMAT_TRY && ro_subdev) + return -EPERM; + memset(sel->reserved, 0, sizeof(sel->reserved)); return v4l2_subdev_call( sd, pad, set_selection, subdev_fh->pad, sel); @@ -604,6 +617,9 @@ static long subdev_do_ioctl(struct file *file, unsigned int cmd, void *arg) return v4l2_subdev_call(sd, video, g_dv_timings, arg); case VIDIOC_SUBDEV_S_DV_TIMINGS: + if (ro_subdev) + return -EPERM; + return v4l2_subdev_call(sd, video, s_dv_timings, arg); case VIDIOC_SUBDEV_G_STD: @@ -612,6 +628,9 @@ static long subdev_do_ioctl(struct file *file, unsigned int cmd, void *arg) case VIDIOC_SUBDEV_S_STD: { v4l2_std_id *std = arg; + if (ro_subdev) + return -EPERM; + return v4l2_subdev_call(sd, video, s_std, *std); } diff --git a/include/media/v4l2-dev.h b/include/media/v4l2-dev.h index 4602c15ff878..bdbd953a976c 100644 --- a/include/media/v4l2-dev.h +++ b/include/media/v4l2-dev.h @@ -82,11 +82,18 @@ struct v4l2_ctrl_handler; * but the old crop API will still work as expected in order to preserve * backwards compatibility. * Never set this flag for new drivers. + * @V4L2_FL_RO_DEVNODE: + * indicates that the video device node is registered in read-only mode. + * The flag only applies to device nodes registered for sub-devices, it is + * set by the core when the sub-devices device nodes are registered with + * v4l2_device_register_ro_subdev_nodes() and used by the sub-device ioctl + * handler to restrict access to some ioctl calls. */ enum v4l2_video_device_flags { V4L2_FL_REGISTERED = 0, V4L2_FL_USES_V4L2_FH = 1, V4L2_FL_QUIRK_INVERTED_CROP = 2, + V4L2_FL_RO_DEVNODE = 3, }; /* Priority helper functions */ diff --git a/include/media/v4l2-device.h b/include/media/v4l2-device.h index 7c912b7d2870..c01aa9df70b5 100644 --- a/include/media/v4l2-device.h +++ b/include/media/v4l2-device.h @@ -174,14 +174,48 @@ int __must_check v4l2_device_register_subdev(struct v4l2_device *v4l2_dev, void v4l2_device_unregister_subdev(struct v4l2_subdev *sd); /** - * v4l2_device_register_subdev_nodes - Registers device nodes for all subdevs - * of the v4l2 device that are marked with - * the %V4L2_SUBDEV_FL_HAS_DEVNODE flag. + * __v4l2_device_register_ro_subdev_nodes - Registers device nodes for + * all subdevs of the v4l2 device that are marked with the + * %V4L2_SUBDEV_FL_HAS_DEVNODE flag. * * @v4l2_dev: pointer to struct v4l2_device + * @read_only: subdevices read-only flag. True to register the subdevices + * device nodes in read-only mode, false to allow full access to the + * subdevice userspace API. */ int __must_check -v4l2_device_register_subdev_nodes(struct v4l2_device *v4l2_dev); +__v4l2_device_register_subdev_nodes(struct v4l2_device *v4l2_dev, + bool read_only); + +/** + * v4l2_device_register_subdev_nodes - Registers subdevices device nodes with + * unrestricted access to the subdevice userspace operations + * + * Internally calls __v4l2_device_register_subdev_nodes(). See its documentation + * for more details. + * + * @v4l2_dev: pointer to struct v4l2_device + */ +static inline int __must_check +v4l2_device_register_subdev_nodes(struct v4l2_device *v4l2_dev) +{ + return __v4l2_device_register_subdev_nodes(v4l2_dev, false); +} + +/** + * v4l2_device_register_ro_subdev_nodes - Registers subdevices device nodes + * in read-only mode + * + * Internally calls __v4l2_device_register_subdev_nodes(). See its documentation + * for more details. + * + * @v4l2_dev: pointer to struct v4l2_device + */ +static inline int __must_check +v4l2_device_register_ro_subdev_nodes(struct v4l2_device *v4l2_dev) +{ + return __v4l2_device_register_subdev_nodes(v4l2_dev, true); +} /** * v4l2_subdev_notify - Sends a notification to v4l2_device.